We performed a comparison between Cisco Ethernet Switches and HPE Ethernet Switches based on real PeerSpot user reviews.
Find out in this report how the two Ethernet Switches solutions compare in terms of features, pricing, service and support, easy of deployment, and ROI."Very stable solution with a very low failure rate."
"The procedures and handling of these switches are easy."
"When it comes to switching routing, we have no doubts about Cisco."
"The most valuable features of this solution are the auto-complete functionality and the end-to-end functionalities such as routing with the channel."
"We have found it to be scalable. We have approximately three million subscribers."
"These switches are both stable and scalable."
"Cisco Ethernet Switches is stable and robust."
"The product offers very good customer support. It's likely the best in the industry."
"The technical support for this solution has improved from what it was."
"We have scaled it without any issues."
"The graphical userface is very good and quite easy to run with."
"The solution performs well for its price."
"he stability is very good on this solution. There have been no bugs, glitches or crashes."
"The most valuable features of this solution are the interface and configuration. It's very easy to use."
"The speed is very fast."
"The initial setup of this solution is easy."
"The solution's reliability should be improved."
"The price of the solution has room for improvement."
"Technical support in India needs to be improved."
"The user interface could be improved."
"The cost is very prohibitive both for us as well as other organizations. It's very expensive to buy Cisco switches. Among our colleagues, we find that we're not alone in thinking it's too high. Everyone's complaining about this."
"Integration with third-party products could be improved."
"Their firmware could be better secured against vulnerabilities or other exploits. Also, only selected catalyst switches are allowed to onboard to Cisco SD Access technology."
"The high price of the tool is an area of concern where improvements are required."
"The tool should be more stable."
"This solution needs to support software-defined networking."
"The solution is very comparable to Huawei, however, it could be more scalable. Huawei is easier to scale."
"VLAN can be improved, but I have to check that with the company expert. I have different switch models, but they don't have all the same interface. I don't know whether lower-level switches don't have the same interface as the better quality ones. I might have two different model types."
"In the next release, I would like to see them include more features like the Aruba solution, to have more possibilities concerning the software design."
"They should continue to work on new features."
"Technical support needs improvement, as the response time could be better."
"The solution would be easier to set up if its GUI could improve or if it had a wizard."
Cisco Ethernet Switches is ranked 1st in Ethernet Switches with 128 reviews while HPE Ethernet Switches is ranked 10th in Ethernet Switches with 94 reviews. Cisco Ethernet Switches is rated 8.6, while HPE Ethernet Switches is rated 8.2. The top reviewer of Cisco Ethernet Switches writes "It's a solidly stable product from a leader in the field". On the other hand, the top reviewer of HPE Ethernet Switches writes "They're solid and can last for up to 15 years". Cisco Ethernet Switches is most compared with Aruba Switches, Fortinet FortiSwitch - Secure Access, D-Link Ethernet Switches and Ubiquiti UniFi Switches, whereas HPE Ethernet Switches is most compared with Ubiquiti UniFi Switches, H3C Ethernet Switches, Juniper EX Series Ethernet Switches, Meraki MS Switches and D-Link Ethernet Switches. See our Cisco Ethernet Switches vs. HPE Ethernet Switches report.
See our list of best Ethernet Switches vendors.
We monitor all Ethernet Switches reviews to prevent fraudulent reviews and keep review quality high. We do not post reviews by company employees or direct competitors. We validate each review for authenticity via cross-reference with LinkedIn, and personal follow-up with the reviewer when necessary.
Have to agree with Durrell on the Cisco offerings and certifications. I would say Avaya is more on VoIP capability and have not heard about their switch portfolio. For HP networking, they are on par with Cisco. In terms of capability and support, I would say Cisco is there.
Have you used any other vendors in the Ethernet Switch market?
Answer: Yes, I have used Arista Networks as well.
Have to agree with Durrell, while the equipment and support performs better than the competitors in my opinion, the shear volume of training that has been put out by Cisco has made it the leader. Other providers offer training of course, but none are as comprehensive and well known as the Cisco offerings..they have become THE standard for networking.
Hi,
Cisco simply has very well working equipment and it's a huge company which has gold reserves bigger than fort knox :)
I've used enterasys, juniper, noname and 3com switches, everyone has its advantages but cisco was what I liked most. Simply does its work and there is no place for failure. Only thing you need is vacuum machine from time to time.
The emphasis that has been put on certifications is the biggest reason these vendors are not taking up a bigger share of the market. The industry standards for networking certs are the Cisco ones. Since the certs are catered to their equipment, it just makes sense that they have such a huge market share.
For price/performance, I think HP and Juniper offer more than Cisco. HP typically comes in at a much lower cost for comparable features and throughput, and their switches have been very reliable for me. Juniper switches are similarly priced to Cisco gear, but they usually offer a much wider range of functions, along with equal or better performance.
All of the reasons Nuno listed, above, are valid. In addition:
4. High Performance - On balance, for most classes of switch, Cisco gear performs better. I've had great experience with HP Procurve switches, and their price/performance has been very good. But once in a while, they couldn't keep up with demanding traffic, like iSCSI, and we had to go back to Cisco gear.
5. OEM Testing and Validation - If you're introducing new network gear - firewalls, storage, servers, etc. - you will make sure it works with Cisco switches because the installed base is huge. This is a vicious cycle - more Cisco interoperability and validation means fewer issues with Cisco gear.
I have used Netgear and 3com switches.
I have tried a few other vendors on the Ethernet switch market, especially HP, Huawei and SMC switches. Haven’t used Alcatel personally, but have had interesting feedback for them from colleagues.
Regarding Cisco however, I believe there are three main reasons for it:
1) Integration on the “cisco environment”, with a structured offer from basic switches, up to multi-layer equipment, allowing a consistent platform all through the enterprise.
2) Management interface – ranging from graphic management (through local web interface, CiscoWorks modules, etc.), to CLI, with the Cisco IOS, provides great flexibility for remote management, configuration backup, and monitoring.
3) Expertise of in-house personnel – Both the training provided by Cisco itself, and the fact that Cisco has a strong base for the remaining network infrastructure (routers, and other network devices).
There is also the issue that, sometimes, some mixed vendor environment can bring issues with 802.1q trunking (I’ve seen issues with HP Switches while having problems with a VLAN 1 on the HP mixing with a native VLAN on Cisco for instance…), and other proprietary protocols (CDP for instance) that can have implications with the way management or configuration is done…
Also, in some cases, the use of other technologies that cisco has brought along over the years – Network access control, that interfaces with Cisco switches for instance, and the buildup of different interactions with other technologies, ends up creating a technical barrier on top of the barrier for change on things like:
“our other 30 switches are Cisco, and now I’ll place another vendor one?”.
And on that question, price is not likely to be the most important factor, but TCO, existing expertise, and applications running on the network (that need QoS for instance), and integration with existing monitoring, configuration management, and infrastructure, may be the most important factor on the decision…