We performed a comparison between Juniper EX Series Ethernet Switches and NETGEAR Switches based on real PeerSpot user reviews.
Find out in this report how the two Ethernet Switches solutions compare in terms of features, pricing, service and support, easy of deployment, and ROI."It has features that allow us to go back to previous configurations."
"One of the nicest things about Juniper switches is they work well with other vendor products. When you have to go into a situation where other vendor switches are present, you can make it work."
"You willuse almost every feature on every switch to some degree because the utility is valuable."
"It is very valuable for SRX devices and we have found it very easy to configure."
"We have found the product to be scalable."
"In terms of performance, Juniper switches have a more user-friendly interface and more features than Cisco products."
"Juniper switches are smart and we have all the features that we want. You can rollback to the previous version if you make any mistake during configuration. This is not possible in Cisco."
"The Juniper EX Series's most valuable feature is its robustness. Additionally, it is easy to use and great GUI."
"The most valuable feature to me is the modular side of things, being able to replace a module and a transceiver at our beck and call. If something goes down, or a piece of equipment is broken, I don't have to replace the whole switch. I can just replace the part that's broken or the part that is no longer working. I can get them back up and working within a matter of minutes, versus having to replace everything and reprogram everything. It's a huge time-saver."
"Valuable features include network monitoring and ease of programming for VLANs, etc. I especially like NETGEAR because it's easy to teach system administrators how to use them, how to look at them, how to make changes to them without having the complexity of CLIs, but still having a CLI should we need it."
"We have one client that has three Insight switches and when we make a change to their network... we can make the configuration change and push it down to all three switches at once. We don't have to individually log on to each switch to make the change."
"Remote management is the most important thing for us. And monitoring, of course, allows us to see when something is wrong with a client. We get notified that an access point is down, for instance, or that there are too many clients on one access point, so that we can log into the portal and manage the solution with the client instantly, from either a laptop or a cell phone, with the Insight app."
"The ease of use of these switches is very good because of the Cisco CLI. If you are familiar with CLI, then you can configure the switch that way. It also has a relatively straightforward web interface. Using the web interface is good for beginners or people who aren't familiar with Cisco CLI. However, having a common command line interface method is great for some of our more advanced guys who are familiar with it."
"The stability is good. I would rate the stability a ten out of ten."
"You are not limited in terms of stacking ports, and especially, if you're using the 96X as a core switch, the scalability, I could see this being very large. If you're using a type of a hybrid topology with a core switch going out to multiple switch stacks, or something like that, I could see the scalability of this being very good, especially considering the kind of backplane switching capacity on the 96X."
"This switch is Layer 3, so it is a totally managed system."
"The updates are constantly breaking."
"Juniper Ethernet Switches would be improved by upgrading the uplink port in EX2300 categories service from 10G to 25G."
"I would like the ability to operate with other operating systems."
"We are undergoing a migration to software-defined networking. Different vendors have to integrate with each other and we are not seeing this type of capability within Juniper. We are getting left behind in this technology trend by staying with this solution. Juniper is also losing a bit of market share because of this."
"There are multiple areas of improvement in Juniper EX series switches. In terms of speed and pricing, while Juniper provides good quality services, some clients still find the price very high compared to other competitors. Also there is a need for certain features to be enhanced like clear our configuration process which will help to make Juniper switches more stronger. However, there are also multiple challenges including understanding and configuration of certain aspects difficult without assistance. Despite these kinds of challenges, there have been multiple solutions and huge potential of improvement in Juniper."
"The price is in the intermediate range. It is not overly expensive, but also not cheap. It could stand improvement."
"They could provide better security tools."
"Has a steep learning curve."
"My one issue with it is that not all the features of the switch can currently be managed via the portal. For some of the more advanced features, you still have to configure the switch."
"One thing I have asked for, something that NETGEAR lacks that I would love to see — and from what I understand it's in the works — is a REST API to programmatically interface with multiple switches. That would be a great feature."
"There is a lot of delay in the data coming to the servers."
"The product's scalability has certain shortcomings that can be improved."
"The ‘how-to’ guides could do with some improvements. We got in trouble following the stacking and Dante set-up guides. If these would have been accurate, we would not have lost three days."
"The scalability and warranty should also be improved."
"The web interface has been a little sketchy on occasion. Sometimes I have to reload the page to get things to show up properly, but the switch itself seems fine. The web user interface is a little wonky at times."
"I'd like to see a little bit of slowdown on the firmware updates. They've been doing a lot of them. I don't know if that's just because it's such a new product line, but the firmware updates have been a little annoying because they've been coming once a week. For a switch, that's a little extreme."
More Juniper EX Series Ethernet Switches Pricing and Cost Advice →
Juniper EX Series Ethernet Switches is ranked 8th in Ethernet Switches with 63 reviews while NETGEAR Switches is ranked 4th in Ethernet Switches with 49 reviews. Juniper EX Series Ethernet Switches is rated 8.2, while NETGEAR Switches is rated 8.2. The top reviewer of Juniper EX Series Ethernet Switches writes "Provides campus switches and access switches that are simple to deploy, but the code isn't stable enough for a leaf and spine design". On the other hand, the top reviewer of NETGEAR Switches writes "You can stack different models of switches which makes the scalability great". Juniper EX Series Ethernet Switches is most compared with Cisco Ethernet Switches, Aruba Switches, Arista Networks Platform, Ubiquiti UniFi Switches and Mellanox Switches, whereas NETGEAR Switches is most compared with D-Link Ethernet Switches, Cisco Linksys Ethernet Switches, Cisco Ethernet Switches, Ubiquiti UniFi Switches and HPE Ethernet Switches. See our Juniper EX Series Ethernet Switches vs. NETGEAR Switches report.
See our list of best Ethernet Switches vendors.
We monitor all Ethernet Switches reviews to prevent fraudulent reviews and keep review quality high. We do not post reviews by company employees or direct competitors. We validate each review for authenticity via cross-reference with LinkedIn, and personal follow-up with the reviewer when necessary.