We performed a comparison between Juniper EX Series Ethernet Switches and NETGEAR Switches based on real PeerSpot user reviews.
Find out in this report how the two Ethernet Switches solutions compare in terms of features, pricing, service and support, easy of deployment, and ROI."The GUI interface distinguishes it from other vendors and makes it easy to operate."
"It is very valuable for SRX devices and we have found it very easy to configure."
"It is stable."
"It's pretty good as compared to other vendors."
"I like that it's fairly easy to implement these ethernet switches."
"The feature I like the most is the ability to reword changes before committing to the change. We can always reword changes in 10 minutes if they don't work."
"Juniper switches are smart and we have all the features that we want. You can rollback to the previous version if you make any mistake during configuration. This is not possible in Cisco."
"The product is flexible and easy to set up."
"I'm satisfied with the stability of NETGEAR Switches."
"This is a cost-effective solution."
"The stability is good. I would rate the stability a ten out of ten."
"There is a lot of helpful documentation that helps with the configuration process."
"We have one client that has three Insight switches and when we make a change to their network... we can make the configuration change and push it down to all three switches at once. We don't have to individually log on to each switch to make the change."
"The most valuable feature to me is the modular side of things, being able to replace a module and a transceiver at our beck and call. If something goes down, or a piece of equipment is broken, I don't have to replace the whole switch. I can just replace the part that's broken or the part that is no longer working. I can get them back up and working within a matter of minutes, versus having to replace everything and reprogram everything. It's a huge time-saver."
"The tool is very easy to deploy as it is a very basic switch."
"As far as remoting into it goes, it is very efficient because I can do it from anywhere, through the remote software. I can get right into it, I can change settings really quickly, if a customer needs to add another device into it or if I need to make changes on the VLANs that we created."
"Has a steep learning curve."
"The protocols can be tunneled, but on a global basis, not on an interface, and this is a feature that should be added."
"Their web GUI interface needs to be a lot better, especially when compared to HP. The command line is good, but you have to know how to get around it. The GUI is clunky and very slow."
"The only issue that we have with Juniper Ethernet Switches is the firmware because it is not stable."
"The difficulty of the installation of Juniper Ethernet Switches depends on the environment it is being implemented in. It is fairly straightforward in terms of being able to source the technical information as we need it. However, this process could improve."
"Jupiter Switches' configuration is a little difficult to understand."
"The operating system, Junos OS, often has bugs which forces rollbacks or additional upgrades to resolve."
"In the next release of this solution, I would like to see better integration with software-defined networking."
"One thing I would like to see improved is the response time for technical support."
"The ‘how-to’ guides could do with some improvements. We got in trouble following the stacking and Dante set-up guides. If these would have been accurate, we would not have lost three days."
"There is a technical problem they can't seem to solve. It doesn't support multicast packets. In layman's terms, Mac computers can't print over the network."
"When the power does go out, or if we do a soft shutdown, some of the transceivers or the monitor don't recognize when it turns back on, so I have to physically unplug it and plug it back in and then it works. We're working with NETGEAR's engineers to figure out why that's happening."
"An area for improvement would be creating a wizard that can do a lot of common stuff. Instead of having some manual configuration for common features, they may want to have a single wizard that could be put in place which would let you walk through creating multiple VLANs and different routes between VLANs in a wizard. Then, you wouldn't have to dig in so deep."
"NETGEAR Switches could be more secure. Scalability could also be better. This infrastructure is a bit old, and we need something that will be more secure. Something that will introduce WLAN, and we will need the knowledge to go with that. Some of the switches were used for more than seven years. I think it was just their lifespan that was exhausted. But other than that, there haven't been any issues that required us to complain or get concerned."
"NETGEAR Switches could provide local technical support services."
"I would like an email notification in case of errors or failures. If it was possible for the switch to email out an error log or notification note, especially in cases where we have the switches offsite (on the other side of town), then if something was to go wrong, it would be great to know about it before our client goes to use it for a big event, and it doesn't work. While I know that it does do SNMP, which is sort of standard, in the AV world, that is not always an option for us. We are usually running our own little network box and don't always have access to an SNMP server. We may just have simple Internet access or something similar."
More Juniper EX Series Ethernet Switches Pricing and Cost Advice →
Juniper EX Series Ethernet Switches is ranked 8th in Ethernet Switches with 64 reviews while NETGEAR Switches is ranked 4th in Ethernet Switches with 50 reviews. Juniper EX Series Ethernet Switches is rated 8.2, while NETGEAR Switches is rated 8.2. The top reviewer of Juniper EX Series Ethernet Switches writes "Provides campus switches and access switches that are simple to deploy, but the code isn't stable enough for a leaf and spine design". On the other hand, the top reviewer of NETGEAR Switches writes "You can stack different models of switches which makes the scalability great". Juniper EX Series Ethernet Switches is most compared with Cisco Ethernet Switches, Aruba Switches, Arista Networks Platform, Ubiquiti UniFi Switches and Mellanox Switches, whereas NETGEAR Switches is most compared with D-Link Ethernet Switches, Cisco Linksys Ethernet Switches, Cisco Ethernet Switches, Ubiquiti UniFi Switches and HPE Ethernet Switches. See our Juniper EX Series Ethernet Switches vs. NETGEAR Switches report.
See our list of best Ethernet Switches vendors.
We monitor all Ethernet Switches reviews to prevent fraudulent reviews and keep review quality high. We do not post reviews by company employees or direct competitors. We validate each review for authenticity via cross-reference with LinkedIn, and personal follow-up with the reviewer when necessary.