We performed a comparison between Juniper EX Series Ethernet Switches and NETGEAR Switches based on real PeerSpot user reviews.
Find out in this report how the two Ethernet Switches solutions compare in terms of features, pricing, service and support, easy of deployment, and ROI."I would rate this solution a 10 out of 10 for scalability."
"Juniper Ethernet Switches are high-end solutions."
"The most valuable feature is the Spanning Tree Protocol (STP)."
"The virtual Chassis feature for stacking is good in general, with high bandwidth for the link, which is good."
"I like that it's fairly easy to implement these ethernet switches."
"The product is very helpful in troubleshooting."
"I like the VLAN capabilities, and the Junos interface is easy to use."
"It is very valuable for SRX devices and we have found it very easy to configure."
"The ease of use of these switches is very good because of the Cisco CLI. If you are familiar with CLI, then you can configure the switch that way. It also has a relatively straightforward web interface. Using the web interface is good for beginners or people who aren't familiar with Cisco CLI. However, having a common command line interface method is great for some of our more advanced guys who are familiar with it."
"The remote management tools are fantastic. The combination of the webpage as well as the app makes life so much easier. I don't need to go and visit sites to do upgrades or any sorts of changes. The firmware can all be deployed remotely. I can see the traffic on each of the switch ports remotely as well, so I can see if we've got problems, down to an individual port. It's very granular."
"Their online portal is one of the most useful features. The portal is very user-friendly, so even someone with not a lot of tech experience can go in and see what's going on with the switch."
"For what I used this switch for, it did well."
"The solution is reliable and it is easy to setup."
"Remote management is the most important thing for us. And monitoring, of course, allows us to see when something is wrong with a client. We get notified that an access point is down, for instance, or that there are too many clients on one access point, so that we can log into the portal and manage the solution with the client instantly, from either a laptop or a cell phone, with the Insight app."
"The remote troubleshooting features provide a single pane of glass where I can see my all my clients' equipment. If they're reporting a problem, I can go to the Insight Pro interface online and I can bring up that client and I can see all their devices and the status of all their devices."
"We have one client that has three Insight switches and when we make a change to their network... we can make the configuration change and push it down to all three switches at once. We don't have to individually log on to each switch to make the change."
"Juniper EX Series Ethernet Switches is not cheap. The tool needs improvement in UI."
"Their web GUI interface needs to be a lot better, especially when compared to HP. The command line is good, but you have to know how to get around it. The GUI is clunky and very slow."
"The technical support from Juniper Ethernet Switches could be better."
"Juniper Ethernet Switches' tech support is hard to reach and slow."
"They should integrate VPN functionality with the solution."
"They could provide better security tools."
"The configuration could be made simpler."
"EX switches take too long to boot when we restart them for maintenance. We need to minimize downtime. Another issue is the command line interface. Juniper's commands are different from other switches, so it's hard to remember them."
"What I'd like to see is more compatibility with virtual stacking, so that 4300-series switches and 3300-series switches will actually stack together and that virtual switch stacks, themselves, are not limited to just six devices, so that they can create larger loops with more bandwidth and more redundancy."
"The ‘how-to’ guides could do with some improvements. We got in trouble following the stacking and Dante set-up guides. If these would have been accurate, we would not have lost three days."
"I would like an email notification in case of errors or failures. If it was possible for the switch to email out an error log or notification note, especially in cases where we have the switches offsite (on the other side of town), then if something was to go wrong, it would be great to know about it before our client goes to use it for a big event, and it doesn't work. While I know that it does do SNMP, which is sort of standard, in the AV world, that is not always an option for us. We are usually running our own little network box and don't always have access to an SNMP server. We may just have simple Internet access or something similar."
"NETGEAR Switches could provide local technical support services."
"Their old firmware was a problem for us and we're still working on it. It didn't apply correctly so it took about half of our switches offline, which meant we couldn't use some of the functionality like the firmware updates. Unfortunately with that firmware, which they've sorted out, if you don't go through all the firmware and make sure it's past that point and back online, that's an issue with them. It's something to cautious about"
"There's a lack of chips and, consequently, a lack of deliveries. They're out of stock at their European warehouse."
"There is a technical problem they can't seem to solve. It doesn't support multicast packets. In layman's terms, Mac computers can't print over the network."
"There are a lot of systems that are moving into different areas. There are a lot of cloud-based things happening. One nice feature that I've seen in other switches is artificial intelligence on the actual porting. They've got AI technology that will tell you when a port is down. They not only tell you when a port is down; they also tell you when a port is running slower. You can do a cable-fault check, or you can do other checks. It would be nice to have this information in NETGEAR. This feature might already be there in a new release of the NETGEAR's firmware, but I haven't seen it."
More Juniper EX Series Ethernet Switches Pricing and Cost Advice →
Juniper EX Series Ethernet Switches is ranked 8th in Ethernet Switches with 63 reviews while NETGEAR Switches is ranked 4th in Ethernet Switches with 50 reviews. Juniper EX Series Ethernet Switches is rated 8.2, while NETGEAR Switches is rated 8.2. The top reviewer of Juniper EX Series Ethernet Switches writes "Provides campus switches and access switches that are simple to deploy, but the code isn't stable enough for a leaf and spine design". On the other hand, the top reviewer of NETGEAR Switches writes "You can stack different models of switches which makes the scalability great". Juniper EX Series Ethernet Switches is most compared with Cisco Ethernet Switches, Aruba Switches, Arista Networks Platform, Ubiquiti UniFi Switches and Mellanox Switches, whereas NETGEAR Switches is most compared with D-Link Ethernet Switches, Cisco Linksys Ethernet Switches, Cisco Ethernet Switches, Ubiquiti UniFi Switches and HPE Ethernet Switches. See our Juniper EX Series Ethernet Switches vs. NETGEAR Switches report.
See our list of best Ethernet Switches vendors.
We monitor all Ethernet Switches reviews to prevent fraudulent reviews and keep review quality high. We do not post reviews by company employees or direct competitors. We validate each review for authenticity via cross-reference with LinkedIn, and personal follow-up with the reviewer when necessary.