We performed a comparison between Juniper EX Series Ethernet Switches and NETGEAR Switches based on real PeerSpot user reviews.
Find out in this report how the two Ethernet Switches solutions compare in terms of features, pricing, service and support, easy of deployment, and ROI."The thing that sets Juniper apart from most switches is that when you're in the command line and you make a configuration change, you just write the command and then say "commit confirmed minutes". For example, I'm configuring a switch here in my office, which is five miles away, and I say, "commit confirmed 5". If I can't get back to the interface within five minutes to be able to make sure the switch came up, it rolls back to the previous configuration. This way I do not get locked out, or the switch doesn't get messed up because of the incorrect configuration. That's an automatic feature, which is pretty slick. I haven't seen that feature with other vendors that I've worked with. That's probably my most favorite feature."
"One of the nicest things about Juniper switches is they work well with other vendor products. When you have to go into a situation where other vendor switches are present, you can make it work."
"The Virtual Chassis, because you have a centralized administration of a set of switches which makes the operation more efficient."
"The product is flexible and easy to set up."
"It is a scalable solution."
"This solution is impeccable."
"The platform is very stable in terms of consistency and reliability."
"The solution is easy to use and has good integration."
"The initial setup was straightforward."
"I'm satisfied with the stability of NETGEAR Switches."
"Since it has a web interface, it is easy to set up. You don't have to take three years of training somewhere for a lot of money."
"The stability is good. I would rate the stability a ten out of ten."
"This is a cost-effective solution."
"Netgear switches are highly reliable. We haven't done anything particularly sophisticated with them."
"The ease of use of these switches is very good because of the Cisco CLI. If you are familiar with CLI, then you can configure the switch that way. It also has a relatively straightforward web interface. Using the web interface is good for beginners or people who aren't familiar with Cisco CLI. However, having a common command line interface method is great for some of our more advanced guys who are familiar with it."
"The solution helps transfer data."
"The durability of the devices could be better."
"Its distribution channel and the ease of availability should be improved."
"Juniper Ethernet Switches would be improved by upgrading the uplink port in EX2300 categories service from 10G to 25G."
"Juniper EX Series Ethernet Switches is not cheap. The tool needs improvement in UI."
"The initial setup for Juniper switches is complex. Juniper has a new program that solves that problem a little bit, but it is expensive, so I don't use it. It is Juniper Mesh, Juniper Wire, or something like that where you plug in a switch, and it goes out to their cloud, finds a config, and brings it down. So, you can do everything cloud-based, but there is a fee for that. It is expensive, so I've never used it. If we were starting, we would try to do something like that. It is more for a large enterprise for managing hundreds of switches versus what we're doing. They should make its price more cost-effective or include it for new or smaller companies."
"Juniper should improve the support services provided to users, as it is one of its areas with certain shortcomings."
"I have found the scalability could be improved in the version I was using."
"The Virtual Chassis Fabric is kind of complicated to troubleshoot sometimes. On the MPLS side, they're good — they're fine for the pseudo-wires and stuff—but they need more work on the LAN. It is difficult to troubleshoot their LAN technologies like Virtual Chassis."
"The scalability and warranty should also be improved."
"Being able to pass AVB traffic over these switches, that would be a huge add. There are not many switches out that support that. The GS728TP NETGEAR switches used to or still do support AVB, but it would be ideal if the 4300 Series could support it as well."
"It's worked for the most part, but we've had to power cycle a few devices. We've had to ask customers to manually power cycle them with the power cord, after some of the firmware updates. Their updating needs a little improvement."
"Their old firmware was a problem for us and we're still working on it. It didn't apply correctly so it took about half of our switches offline, which meant we couldn't use some of the functionality like the firmware updates. Unfortunately with that firmware, which they've sorted out, if you don't go through all the firmware and make sure it's past that point and back online, that's an issue with them. It's something to cautious about"
"They need to continue moving forward with their consulting in the AV realm to find out what is needed. They are some differences in the M4300 line and the larger M4500 line right now. They could produce a 1 Gigabit variety that could be a bit cheaper that might fit into that, since the majority of the projects that we see are still in that 1 Gigabit bandwidth threshold. Along with that, a great option would be if it would provide the same modular ability on a lower level."
"Lacks switches with additional ports that provide room for new protocols of communications."
"The technical support could be more helpful."
"The web interface has been a little sketchy on occasion. Sometimes I have to reload the page to get things to show up properly, but the switch itself seems fine. The web user interface is a little wonky at times."
More Juniper EX Series Ethernet Switches Pricing and Cost Advice →
Juniper EX Series Ethernet Switches is ranked 8th in Ethernet Switches with 64 reviews while NETGEAR Switches is ranked 4th in Ethernet Switches with 50 reviews. Juniper EX Series Ethernet Switches is rated 8.2, while NETGEAR Switches is rated 8.2. The top reviewer of Juniper EX Series Ethernet Switches writes "Provides campus switches and access switches that are simple to deploy, but the code isn't stable enough for a leaf and spine design". On the other hand, the top reviewer of NETGEAR Switches writes "You can stack different models of switches which makes the scalability great". Juniper EX Series Ethernet Switches is most compared with Cisco Ethernet Switches, Aruba Switches, Arista Networks Platform, Ubiquiti UniFi Switches and Mellanox Switches, whereas NETGEAR Switches is most compared with D-Link Ethernet Switches, Cisco Linksys Ethernet Switches, Cisco Ethernet Switches, Ubiquiti UniFi Switches and HPE Ethernet Switches. See our Juniper EX Series Ethernet Switches vs. NETGEAR Switches report.
See our list of best Ethernet Switches vendors.
We monitor all Ethernet Switches reviews to prevent fraudulent reviews and keep review quality high. We do not post reviews by company employees or direct competitors. We validate each review for authenticity via cross-reference with LinkedIn, and personal follow-up with the reviewer when necessary.