We performed a comparison between Juniper EX Series Ethernet Switches and NETGEAR Switches based on real PeerSpot user reviews.
Find out in this report how the two Ethernet Switches solutions compare in terms of features, pricing, service and support, easy of deployment, and ROI."The product is very helpful in troubleshooting."
"I like the simplicity of it."
"We have found the product to be scalable."
"You willuse almost every feature on every switch to some degree because the utility is valuable."
"The security is good."
"It's easy to use."
"It's pretty good as compared to other vendors."
"What I like most about this solution is that it is secure."
"The solution is reliable and it is easy to setup."
"The remote troubleshooting features provide a single pane of glass where I can see my all my clients' equipment. If they're reporting a problem, I can go to the Insight Pro interface online and I can bring up that client and I can see all their devices and the status of all their devices."
"Its setup, usage, and access are most valuable. It is a very easy switch to set up."
"You are not limited in terms of stacking ports, and especially, if you're using the 96X as a core switch, the scalability, I could see this being very large. If you're using a type of a hybrid topology with a core switch going out to multiple switch stacks, or something like that, I could see the scalability of this being very good, especially considering the kind of backplane switching capacity on the 96X."
"The High Bandwidth AV-over-IP functionality of these switches has been fantastic, especially in leaf-and-spine. We've been able to build redundancy and they seem to outperform even the Cisco Catalyst, which is about twice as expensive as the M-series switches are."
"The initial setup was straightforward."
"Valuable features include network monitoring and ease of programming for VLANs, etc. I especially like NETGEAR because it's easy to teach system administrators how to use them, how to look at them, how to make changes to them without having the complexity of CLIs, but still having a CLI should we need it."
"The most valuable feature to me is the modular side of things, being able to replace a module and a transceiver at our beck and call. If something goes down, or a piece of equipment is broken, I don't have to replace the whole switch. I can just replace the part that's broken or the part that is no longer working. I can get them back up and working within a matter of minutes, versus having to replace everything and reprogram everything. It's a huge time-saver."
"The configuration could be made simpler."
"The operating system could be better."
"The technical support from Juniper Ethernet Switches could be better."
"I have found the scalability could be improved in the version I was using."
"The stability could be better. We find, for example, Cisco, to be more stable."
"Its distribution channel and the ease of availability should be improved."
"We are undergoing a migration to software-defined networking. Different vendors have to integrate with each other and we are not seeing this type of capability within Juniper. We are getting left behind in this technology trend by staying with this solution. Juniper is also losing a bit of market share because of this."
"The upgrading of the system should be simplified and made faster."
"Though the tool's useability is good, it has certain shortcomings where improvements are required."
"One area that has room for improvement, and I know NETGEAR is working on it, is adding more features to the products lines in terms of what we can manage through the Insight portal... not all Layer 2 or Layer 3 settings are there yet."
"The ‘how-to’ guides could do with some improvements. We got in trouble following the stacking and Dante set-up guides. If these would have been accurate, we would not have lost three days."
"The security features must be improved."
"There's a lack of chips and, consequently, a lack of deliveries. They're out of stock at their European warehouse."
"There are a lot of systems that are moving into different areas. There are a lot of cloud-based things happening. One nice feature that I've seen in other switches is artificial intelligence on the actual porting. They've got AI technology that will tell you when a port is down. They not only tell you when a port is down; they also tell you when a port is running slower. You can do a cable-fault check, or you can do other checks. It would be nice to have this information in NETGEAR. This feature might already be there in a new release of the NETGEAR's firmware, but I haven't seen it."
"The solution needs centralized management and centralized configuration."
"Centralized monitoring is there, but competitors like Cisco Prime are at a higher level of centralized monitoring."
More Juniper EX Series Ethernet Switches Pricing and Cost Advice →
Juniper EX Series Ethernet Switches is ranked 8th in Ethernet Switches with 64 reviews while NETGEAR Switches is ranked 4th in Ethernet Switches with 50 reviews. Juniper EX Series Ethernet Switches is rated 8.2, while NETGEAR Switches is rated 8.2. The top reviewer of Juniper EX Series Ethernet Switches writes "Provides campus switches and access switches that are simple to deploy, but the code isn't stable enough for a leaf and spine design". On the other hand, the top reviewer of NETGEAR Switches writes "You can stack different models of switches which makes the scalability great". Juniper EX Series Ethernet Switches is most compared with Cisco Ethernet Switches, Aruba Switches, Arista Networks Platform, Ubiquiti UniFi Switches and Mellanox Switches, whereas NETGEAR Switches is most compared with D-Link Ethernet Switches, Cisco Linksys Ethernet Switches, Cisco Ethernet Switches, Ubiquiti UniFi Switches and HPE Ethernet Switches. See our Juniper EX Series Ethernet Switches vs. NETGEAR Switches report.
See our list of best Ethernet Switches vendors.
We monitor all Ethernet Switches reviews to prevent fraudulent reviews and keep review quality high. We do not post reviews by company employees or direct competitors. We validate each review for authenticity via cross-reference with LinkedIn, and personal follow-up with the reviewer when necessary.