We performed a comparison between Juniper EX Series Ethernet Switches and NETGEAR Switches based on real PeerSpot user reviews.
Find out in this report how the two Ethernet Switches solutions compare in terms of features, pricing, service and support, easy of deployment, and ROI."The virtual Chassis feature for stacking is good in general, with high bandwidth for the link, which is good."
"The scalability is excellent. It's one of the aspects of the solution that is quite good."
"The Juniper EX Series's most valuable feature is its robustness. Additionally, it is easy to use and great GUI."
"Juniper switches are smart and we have all the features that we want. You can rollback to the previous version if you make any mistake during configuration. This is not possible in Cisco."
"The most valuable feature is that the CLI is the same on all of the Juniper devices, including routers, switches, and firewalls."
"It has features that allow us to go back to previous configurations."
"One of the nicest things about Juniper switches is they work well with other vendor products. When you have to go into a situation where other vendor switches are present, you can make it work."
"The product is very helpful in troubleshooting."
"The ease of use of these switches is very good because of the Cisco CLI. If you are familiar with CLI, then you can configure the switch that way. It also has a relatively straightforward web interface. Using the web interface is good for beginners or people who aren't familiar with Cisco CLI. However, having a common command line interface method is great for some of our more advanced guys who are familiar with it."
"It's nice, if there is an issue, to be able to go in through the remote. The fact that the remote doesn't require a static IP... is nice. They initiate the contact to the outside world, without requiring a static to get in."
"The cloud management has just been huge for us. We have 80 clients and they all have switches... With the cloud-managed Insight ones... we know more information without having to do complicated SNMP traps. We get nice emails, we get a web interface, and we're not having to wait for our RMM tools to get SNMP traffic to notify us. We don't have to do complicated configurations."
"The ability to mix and match is invaluable. So, we didn't have to run massive super extensive switches in the data closets where it wasn't necessary. Being able to manage it all from one place, as all your network configuration settings went live across your entire building from one management console was really handy."
"Technical support is helpful and quick to respond."
"SFP, speed, and 10-Gigabit are the most valuable aspects of this solution. We're an architecture firm and we sometimes deal with large files. Anything we can do to eke out even a fraction of a second less time to get something done over the course of a year adds up. If I can get 10-Gigabit running in my server room, which I am right now, even though we're only gigabit to the desktop, due to the client computers we have, I can get more performance from everybody. I'm ready to start bringing in 10-Gigabit Ethernet to the desktop once I get the hardware to do that."
"The big winner for NETGEAR is their modular switch: the 96X version. That is something that you don't see in the market anywhere else, except for Cisco who has it at a high level for a high expense. The ability to customize your own switch with their modules is a big plus for what we do in the market right now. Instead of having to piece together standardized switches, trying to make something work, or fitting the design into the mold, the modular switches are aware that you can make a mark in the industry because you purchased one switch and design with different modules added and removed later on for functionality."
"As far as remoting into it goes, it is very efficient because I can do it from anywhere, through the remote software. I can get right into it, I can change settings really quickly, if a customer needs to add another device into it or if I need to make changes on the VLANs that we created."
"I would like the ability to operate with other operating systems."
"One potential drawback of the Juniper EX Series has been that those without experience using a command-line interface (CLI) may find it intimidating. However, Junos is working on improving this by offering tools, such as Juniper Mist with Wired Assurance and Apstra. Additionally, the graphical user interface (GUI) could be improved as it has been considered lackluster across the board in Junos."
"Its distribution channel and the ease of availability should be improved."
"The only issue that we have with Juniper Ethernet Switches is the firmware because it is not stable."
"It would be nice to have a more available list of modules that you can get for this solution."
"The stability of this solution should be improved."
"Jupiter Switches' configuration is a little difficult to understand."
"The price could be a bit lower."
"The management of them, itself, is not so good. You have to go between many different browsers, even some super-old browsers, to be able to do it. That is a super pain."
"The IGMP specifics of the web management console could use a bit of clarification."
"One thing I have asked for, something that NETGEAR lacks that I would love to see — and from what I understand it's in the works — is a REST API to programmatically interface with multiple switches. That would be a great feature."
"The product's scalability has certain shortcomings that can be improved."
"Though the tool's useability is good, it has certain shortcomings where improvements are required."
"They need to continue moving forward with their consulting in the AV realm to find out what is needed. They are some differences in the M4300 line and the larger M4500 line right now. They could produce a 1 Gigabit variety that could be a bit cheaper that might fit into that, since the majority of the projects that we see are still in that 1 Gigabit bandwidth threshold. Along with that, a great option would be if it would provide the same modular ability on a lower level."
"Support needs to be improved."
"There is a lot of delay in the data coming to the servers."
More Juniper EX Series Ethernet Switches Pricing and Cost Advice →
Juniper EX Series Ethernet Switches is ranked 8th in Ethernet Switches with 64 reviews while NETGEAR Switches is ranked 4th in Ethernet Switches with 50 reviews. Juniper EX Series Ethernet Switches is rated 8.2, while NETGEAR Switches is rated 8.2. The top reviewer of Juniper EX Series Ethernet Switches writes "Provides campus switches and access switches that are simple to deploy, but the code isn't stable enough for a leaf and spine design". On the other hand, the top reviewer of NETGEAR Switches writes "You can stack different models of switches which makes the scalability great". Juniper EX Series Ethernet Switches is most compared with Cisco Ethernet Switches, Aruba Switches, Arista Networks Platform, Ubiquiti UniFi Switches and Mellanox Switches, whereas NETGEAR Switches is most compared with D-Link Ethernet Switches, Cisco Linksys Ethernet Switches, Cisco Ethernet Switches, Ubiquiti UniFi Switches and HPE Ethernet Switches. See our Juniper EX Series Ethernet Switches vs. NETGEAR Switches report.
See our list of best Ethernet Switches vendors.
We monitor all Ethernet Switches reviews to prevent fraudulent reviews and keep review quality high. We do not post reviews by company employees or direct competitors. We validate each review for authenticity via cross-reference with LinkedIn, and personal follow-up with the reviewer when necessary.