We performed a comparison between Juniper EX Series Ethernet Switches and NETGEAR Switches based on real PeerSpot user reviews.
Find out in this report how the two Ethernet Switches solutions compare in terms of features, pricing, service and support, easy of deployment, and ROI."It is very valuable for SRX devices and we have found it very easy to configure."
"You willuse almost every feature on every switch to some degree because the utility is valuable."
"I like the VLAN capabilities, and the Junos interface is easy to use."
"Juniper supports all our connectivity infrastructure in our datacenter, supporting optimal availability and performance for services."
"It is stable."
"The thing that sets Juniper apart from most switches is that when you're in the command line and you make a configuration change, you just write the command and then say "commit confirmed minutes". For example, I'm configuring a switch here in my office, which is five miles away, and I say, "commit confirmed 5". If I can't get back to the interface within five minutes to be able to make sure the switch came up, it rolls back to the previous configuration. This way I do not get locked out, or the switch doesn't get messed up because of the incorrect configuration. That's an automatic feature, which is pretty slick. I haven't seen that feature with other vendors that I've worked with. That's probably my most favorite feature."
"In terms of performance, Juniper switches have a more user-friendly interface and more features than Cisco products."
"The platform is very stable in terms of consistency and reliability."
"Remote management is the most important thing for us. And monitoring, of course, allows us to see when something is wrong with a client. We get notified that an access point is down, for instance, or that there are too many clients on one access point, so that we can log into the portal and manage the solution with the client instantly, from either a laptop or a cell phone, with the Insight app."
"Valuable features include network monitoring and ease of programming for VLANs, etc. I especially like NETGEAR because it's easy to teach system administrators how to use them, how to look at them, how to make changes to them without having the complexity of CLIs, but still having a CLI should we need it."
"The solution is stable."
"The remote troubleshooting is pretty easy. You can turn off a port that might have a network loop created, or where there might be a bad NIC card that is creating issues. Being able to turn off that port remotely is fantastic, instead of having to replace the whole switch. Remote management is really easy."
"Its setup, usage, and access are most valuable. It is a very easy switch to set up."
"The tool is very easy to deploy as it is a very basic switch."
"We have one client that has three Insight switches and when we make a change to their network... we can make the configuration change and push it down to all three switches at once. We don't have to individually log on to each switch to make the change."
"You are not limited in terms of stacking ports, and especially, if you're using the 96X as a core switch, the scalability, I could see this being very large. If you're using a type of a hybrid topology with a core switch going out to multiple switch stacks, or something like that, I could see the scalability of this being very good, especially considering the kind of backplane switching capacity on the 96X."
"Juniper Ethernet Switches' tech support is hard to reach and slow."
"The upgrading of the system should be simplified and made faster."
"Juniper EX Series Ethernet Switches is not cheap. The tool needs improvement in UI."
"The updates are constantly breaking."
"The initial setup for Juniper switches is complex. Juniper has a new program that solves that problem a little bit, but it is expensive, so I don't use it. It is Juniper Mesh, Juniper Wire, or something like that where you plug in a switch, and it goes out to their cloud, finds a config, and brings it down. So, you can do everything cloud-based, but there is a fee for that. It is expensive, so I've never used it. If we were starting, we would try to do something like that. It is more for a large enterprise for managing hundreds of switches versus what we're doing. They should make its price more cost-effective or include it for new or smaller companies."
"I have found the scalability could be improved in the version I was using."
"One potential drawback of the Juniper EX Series has been that those without experience using a command-line interface (CLI) may find it intimidating. However, Junos is working on improving this by offering tools, such as Juniper Mist with Wired Assurance and Apstra. Additionally, the graphical user interface (GUI) could be improved as it has been considered lackluster across the board in Junos."
"In an upcoming release, Juniper Ethernet Switches could improve by having more microservices."
"The product's scalability has certain shortcomings that can be improved."
"It's worked for the most part, but we've had to power cycle a few devices. We've had to ask customers to manually power cycle them with the power cord, after some of the firmware updates. Their updating needs a little improvement."
"There's a lack of chips and, consequently, a lack of deliveries. They're out of stock at their European warehouse."
"There are a lot of systems that are moving into different areas. There are a lot of cloud-based things happening. One nice feature that I've seen in other switches is artificial intelligence on the actual porting. They've got AI technology that will tell you when a port is down. They not only tell you when a port is down; they also tell you when a port is running slower. You can do a cable-fault check, or you can do other checks. It would be nice to have this information in NETGEAR. This feature might already be there in a new release of the NETGEAR's firmware, but I haven't seen it."
"The tool's price could be better."
"The tool needs to improve its network management. The tool can be also more simplified."
"The main negative thing is the speed. When you use the portal, if you have a lot of customers and locations in the portal, and you need to scroll through those clients or those locations, it takes a pretty long time to load those pages and to select the client. That's the problem in the portal on the laptop, and it's the same problem in the portal on the app."
"The product's stability has certain shortcomings that need improvement."
More Juniper EX Series Ethernet Switches Pricing and Cost Advice →
Juniper EX Series Ethernet Switches is ranked 8th in Ethernet Switches with 63 reviews while NETGEAR Switches is ranked 4th in Ethernet Switches with 50 reviews. Juniper EX Series Ethernet Switches is rated 8.2, while NETGEAR Switches is rated 8.2. The top reviewer of Juniper EX Series Ethernet Switches writes "Provides campus switches and access switches that are simple to deploy, but the code isn't stable enough for a leaf and spine design". On the other hand, the top reviewer of NETGEAR Switches writes "You can stack different models of switches which makes the scalability great". Juniper EX Series Ethernet Switches is most compared with Cisco Ethernet Switches, Aruba Switches, Arista Networks Platform, Ubiquiti UniFi Switches and Mellanox Switches, whereas NETGEAR Switches is most compared with D-Link Ethernet Switches, Cisco Linksys Ethernet Switches, Cisco Ethernet Switches, Ubiquiti UniFi Switches and HPE Ethernet Switches. See our Juniper EX Series Ethernet Switches vs. NETGEAR Switches report.
See our list of best Ethernet Switches vendors.
We monitor all Ethernet Switches reviews to prevent fraudulent reviews and keep review quality high. We do not post reviews by company employees or direct competitors. We validate each review for authenticity via cross-reference with LinkedIn, and personal follow-up with the reviewer when necessary.