We performed a comparison between Juniper EX Series Ethernet Switches and NETGEAR Switches based on real PeerSpot user reviews.
Find out in this report how the two Ethernet Switches solutions compare in terms of features, pricing, service and support, easy of deployment, and ROI."The combination of hardware and software makes it a very good solution. It is a modern protocol that they have supported in the switches. The solution has good performance."
"The virtual Chassis feature for stacking is good in general, with high bandwidth for the link, which is good."
"The solution is certainly scalable."
"This solution is impeccable."
"Both Juniper and Cisco switches are interoperable."
"The product is flexible and easy to set up."
"It is very valuable for SRX devices and we have found it very easy to configure."
"In terms of performance, Juniper switches have a more user-friendly interface and more features than Cisco products."
"It's nice, if there is an issue, to be able to go in through the remote. The fact that the remote doesn't require a static IP... is nice. They initiate the contact to the outside world, without requiring a static to get in."
"I'm satisfied with the stability of NETGEAR Switches."
"The solution is reliable and it is easy to setup."
"Its setup, usage, and access are most valuable. It is a very easy switch to set up."
"Netgear switches are highly reliable. We haven't done anything particularly sophisticated with them."
"You are not limited in terms of stacking ports, and especially, if you're using the 96X as a core switch, the scalability, I could see this being very large. If you're using a type of a hybrid topology with a core switch going out to multiple switch stacks, or something like that, I could see the scalability of this being very good, especially considering the kind of backplane switching capacity on the 96X."
"The High Bandwidth AV-over-IP functionality of these switches has been fantastic, especially in leaf-and-spine. We've been able to build redundancy and they seem to outperform even the Cisco Catalyst, which is about twice as expensive as the M-series switches are."
"With this, you literally just log in to a website, see all your clients, all your NETGEAR switches, and you can manage them all right there: the VLANs, powering on and off individual ports, rebooting the whole device, the firmware updates. Everything can be done remotely..."
"More security could be provided, especially with the rising cyber-attacks in business organizations."
"The technical support from Juniper Ethernet Switches could be better."
"I have found the scalability could be improved in the version I was using."
"The stability of this solution should be improved."
"There are multiple areas of improvement in Juniper EX series switches. In terms of speed and pricing, while Juniper provides good quality services, some clients still find the price very high compared to other competitors. Also there is a need for certain features to be enhanced like clear our configuration process which will help to make Juniper switches more stronger. However, there are also multiple challenges including understanding and configuration of certain aspects difficult without assistance. Despite these kinds of challenges, there have been multiple solutions and huge potential of improvement in Juniper."
"In the next release of this solution, I would like to see better integration with software-defined networking."
"The management tools are limited in their abilities, and suffer from upgrade problems."
"The initial setup for Juniper switches is complex. Juniper has a new program that solves that problem a little bit, but it is expensive, so I don't use it. It is Juniper Mesh, Juniper Wire, or something like that where you plug in a switch, and it goes out to their cloud, finds a config, and brings it down. So, you can do everything cloud-based, but there is a fee for that. It is expensive, so I've never used it. If we were starting, we would try to do something like that. It is more for a large enterprise for managing hundreds of switches versus what we're doing. They should make its price more cost-effective or include it for new or smaller companies."
"The management of them, itself, is not so good. You have to go between many different browsers, even some super-old browsers, to be able to do it. That is a super pain."
"An area for improvement would be creating a wizard that can do a lot of common stuff. Instead of having some manual configuration for common features, they may want to have a single wizard that could be put in place which would let you walk through creating multiple VLANs and different routes between VLANs in a wizard. Then, you wouldn't have to dig in so deep."
"Though the tool's useability is good, it has certain shortcomings where improvements are required."
"My one issue with it is that not all the features of the switch can currently be managed via the portal. For some of the more advanced features, you still have to configure the switch."
"It's worked for the most part, but we've had to power cycle a few devices. We've had to ask customers to manually power cycle them with the power cord, after some of the firmware updates. Their updating needs a little improvement."
"Lacks switches with additional ports that provide room for new protocols of communications."
"Support needs to be improved."
"There is a lot of delay in the data coming to the servers."
More Juniper EX Series Ethernet Switches Pricing and Cost Advice →
Juniper EX Series Ethernet Switches is ranked 8th in Ethernet Switches with 64 reviews while NETGEAR Switches is ranked 4th in Ethernet Switches with 50 reviews. Juniper EX Series Ethernet Switches is rated 8.2, while NETGEAR Switches is rated 8.2. The top reviewer of Juniper EX Series Ethernet Switches writes "Provides campus switches and access switches that are simple to deploy, but the code isn't stable enough for a leaf and spine design". On the other hand, the top reviewer of NETGEAR Switches writes "You can stack different models of switches which makes the scalability great". Juniper EX Series Ethernet Switches is most compared with Cisco Ethernet Switches, Aruba Switches, Arista Networks Platform, Ubiquiti UniFi Switches and Mellanox Switches, whereas NETGEAR Switches is most compared with D-Link Ethernet Switches, Cisco Linksys Ethernet Switches, Cisco Ethernet Switches, Ubiquiti UniFi Switches and HPE Ethernet Switches. See our Juniper EX Series Ethernet Switches vs. NETGEAR Switches report.
See our list of best Ethernet Switches vendors.
We monitor all Ethernet Switches reviews to prevent fraudulent reviews and keep review quality high. We do not post reviews by company employees or direct competitors. We validate each review for authenticity via cross-reference with LinkedIn, and personal follow-up with the reviewer when necessary.