We performed a comparison between Juniper EX Series Ethernet Switches and NETGEAR Switches based on real PeerSpot user reviews.
Find out in this report how the two Ethernet Switches solutions compare in terms of features, pricing, service and support, easy of deployment, and ROI."Juniper supports all our connectivity infrastructure in our datacenter, supporting optimal availability and performance for services."
"It's easy to use."
"I would rate this solution a 10 out of 10 for scalability."
"The most valuable feature of this solution is the Junos operating system."
"The most valuable feature is switching on our network."
"The solution has a high level of network functionality."
"The product is very helpful in troubleshooting."
"It is easy to configure, and there are three routing switches."
"The company provides a lifetime warranty."
"Netgear switches are highly reliable. We haven't done anything particularly sophisticated with them."
"The ability to mix and match is invaluable. So, we didn't have to run massive super extensive switches in the data closets where it wasn't necessary. Being able to manage it all from one place, as all your network configuration settings went live across your entire building from one management console was really handy."
"Out-of-the-box, it works for our main use case. When passing multicast video across the network, our technicians don't have make any changes. Then, if we do need to make configuration changes for a custom scenario, the web interface is user intuitive so it's easy to use and change."
"Comes preconfigured and designed specifically for AV."
"The most valuable feature is definitely the fully functional IGMP snooping and querier, out-of-the-box, that the switch provides. With most if not all switches that we've worked with previously, at a minimum you have to enable a couple of different options... It's really a good feature to have that stuff enabled and fully functional out-of-the-box so that [AV techs] don't have to worry about configuring any of that stuff."
"The most important feature is the failover, the LACP links. That's the dual set it allows. We have redundant core switches and, if one fails or one network adapter fails, the other one can take over without problems."
"The solution is stable."
"Has a steep learning curve."
"The price could be a bit lower."
"Juniper needs to get their code up to par because it isn't stable enough for a leaf and spine design."
"In an upcoming release, Juniper Ethernet Switches could improve by having more microservices."
"The security features for the product should be more unified for the product regardless of the product model."
"They could provide better security tools."
"The Virtual Chassis Fabric is kind of complicated to troubleshoot sometimes. On the MPLS side, they're good — they're fine for the pseudo-wires and stuff—but they need more work on the LAN. It is difficult to troubleshoot their LAN technologies like Virtual Chassis."
"Stability could be better, especially during a reboot. We have had some issues recently with the software getting corrupt on reboot, which causes a lot of downtime."
"The security features must be improved."
"The ‘how-to’ guides could do with some improvements. We got in trouble following the stacking and Dante set-up guides. If these would have been accurate, we would not have lost three days."
"When the power does go out, or if we do a soft shutdown, some of the transceivers or the monitor don't recognize when it turns back on, so I have to physically unplug it and plug it back in and then it works. We're working with NETGEAR's engineers to figure out why that's happening."
"Netgear switches could be cheaper."
"Perhaps in the future, we will have even more different types of switches and be able to fulfill more collections."
"One area that has room for improvement, and I know NETGEAR is working on it, is adding more features to the products lines in terms of what we can manage through the Insight portal... not all Layer 2 or Layer 3 settings are there yet."
"The management of them, itself, is not so good. You have to go between many different browsers, even some super-old browsers, to be able to do it. That is a super pain."
"NETGEAR Switches could provide local technical support services."
More Juniper EX Series Ethernet Switches Pricing and Cost Advice →
Juniper EX Series Ethernet Switches is ranked 8th in Ethernet Switches with 63 reviews while NETGEAR Switches is ranked 4th in Ethernet Switches with 50 reviews. Juniper EX Series Ethernet Switches is rated 8.2, while NETGEAR Switches is rated 8.2. The top reviewer of Juniper EX Series Ethernet Switches writes "Provides campus switches and access switches that are simple to deploy, but the code isn't stable enough for a leaf and spine design". On the other hand, the top reviewer of NETGEAR Switches writes "You can stack different models of switches which makes the scalability great". Juniper EX Series Ethernet Switches is most compared with Cisco Ethernet Switches, Aruba Switches, Arista Networks Platform, Ubiquiti UniFi Switches and Mellanox Switches, whereas NETGEAR Switches is most compared with D-Link Ethernet Switches, Cisco Linksys Ethernet Switches, Cisco Ethernet Switches, Ubiquiti UniFi Switches and HPE Ethernet Switches. See our Juniper EX Series Ethernet Switches vs. NETGEAR Switches report.
See our list of best Ethernet Switches vendors.
We monitor all Ethernet Switches reviews to prevent fraudulent reviews and keep review quality high. We do not post reviews by company employees or direct competitors. We validate each review for authenticity via cross-reference with LinkedIn, and personal follow-up with the reviewer when necessary.