We performed a comparison between HPE SimpliVity and Nutanix Cloud Infrastructure (NCI) based on real PeerSpot user reviews.
Find out in this report how the two HCI solutions compare in terms of features, pricing, service and support, easy of deployment, and ROI."This solution has a very good user interface, with simple administration/management."
"The top-notch support before, during, and after deployments are better than any other vendor I have come across."
"Starwind made it easy to deploy fully redundant, highly available storage at a low cost."
"As the client had acquired another company some distance away, they were concerned about having a single SAN in one location or the other. StarWind vSAN allowed us to keep a copy of the data local to each site without asking the client to pay for two SANs in addition to the two new servers they needed."
"StarWind Virtual SAN is a highly flexible solution, as it can be deployed on physical servers or on top of virtual machines running on hypervisors such as VMware vSphere and Microsoft Hyper-V."
"The configuration is so much simpler than that of a traditional SAN with fewer points of failure to worry about."
"The StarWind VSAN is always up and allows us to move VMS to other nodes for maintenance, without interruption to service."
"It also provides a seamless and efficient solution for personal storage requirements, showcasing the versatility and scalability of my Virtual SAN configuration."
"The HPE SimpliVity disc compression is very valuable."
"There is no single feature that's the most valuable. All of SimpliVity's components work together to make daily operations easier for our customers."
"Improves backup time and DR solution."
"SimpliVity has provided our organization with a cost effective DR/data protection solution."
"Up scaling is very possible, and at any time it is scalable."
"What I like about the solution, is that SimpliVity is easy to deploy and maintain. It's really performing very well. The ratio of price to performance is really good."
"What I appreciate most about HPE SimpliVity is its seamless integration of hardware."
"It has lessened our burden on multiple different products, so they are under one umbrella. This has been economically good."
"It's quite easy to scale, and you have the option to have distributed nodes everywhere around the world that work as one. You can also have a solution for small branch offices with only two nodes for redundancy, and that's good enough to start."
"The cloud features in-site offering, which I found to be very interesting."
"Being able to upgrade our entire cluster with the click of a button during business hours with zero downtime has made managing our infrastructure so easy."
"One of the most valuable features is the One-Click Upgrade. When I need to update the system, I do it with one click. This product is amazing because everything is easy to manage, from network management to snapshots."
"It is less expensive than VMware products. It is also a little bit more flexible, but it really comes down to price for us."
"The solution is well integrated with other vendors."
"To receive a performance enhancement by merely clicking the one button upgrade is the true value of the platform and what I look forward to the most."
"The most valuable feature is the one-click to update the firmware and software."
"The main thing I would like to see improved is the level of documentation."
"I would like to see more user-friendly dashboards in future versions."
"The only thing that I have any difficulty with is that in order to perform upgrades, it is required that the SANs be detached from the Hosts before that can happen."
"Being able to run StarWind vSAN on top of any free UNIX operating system to build a resilient iSCSI/FTP/SMB storage system would be useful."
"The GUI deserves a little love."
"Ability to to test the virtual storage are network area and storage speed from StarWind Management Console."
"The logs can also become very noisy when there is an issue, which is very infrequent."
"I'd prefer it if a remote console was provided."
"Its price can be improved. Customers always look for better prices. It is more expensive as compared to other products available in the market."
"It is not so cheap, and this is the most common complaint that my customers have. It is a very good product, but the price is an issue in Latin America. VMware is a de facto tool. It would be useful for customers if HP can also use Red Hat or any other open-source virtualization product. Currently, you can only use VMware to manage the machines inside SimpliVity."
"Its deployment should be easier."
"It could integrate better with other platforms. It's a proprietary solution of HPE, so you are stuck. Before I was running SimpliVity as an independent solution. it wasn't a card and software, so you could put in whatever server, IBM, Dell, etc."
"File level restores work well, but indexing will help make the process faster."
"The centric management could be simplified or more user-friendly."
"SimpliVity's data management could be better. Nutanix's interface is a bit more user-friendly."
"Let us populate the entire node; right now, there are 24 slots in a server and you're only allowed to populate 14."
"I would like better integration of XenServer into the AOS and Prism Central."
"As far as what could be improved, they have some built-in backup functions already, but any built-in isolation features like vision security features and free LAN features become a security concern."
"One thing to keep in mind is that only experts can use it. It has to be in the proper hands, instead of going to XYZ people just for some cost savings. So lift-and-shift and migrations might be tricky, because it is not like a VMware."
"In the future, I would like to see multi-tenancy in Nutanix Acropolis AOS."
"I would like to see more Kubernetes and container-related workflows and multiple cloud-partner management. I would also like to see how they will synergize all these AI/ML functionalities that are available on other platforms."
"This solution offers excellent functionality but could use a stronger interface."
"They need to improve the look and feel of the interface. The functionality is fine, but the appearance could be better."
"I'd like it to be more API-based."
More Nutanix Cloud Infrastructure (NCI) Pricing and Cost Advice →
Try it today
HPE SimpliVity is ranked 5th in HCI with 148 reviews while Nutanix Cloud Infrastructure (NCI) is ranked 2nd in HCI with 192 reviews. HPE SimpliVity is rated 8.6, while Nutanix Cloud Infrastructure (NCI) is rated 8.6. The top reviewer of HPE SimpliVity writes "Provides a unified management interface that allows administrators to manage all aspects of the infrastructure". On the other hand, the top reviewer of Nutanix Cloud Infrastructure (NCI) writes "A powerful solution with easy deployment, upgrades, and management". HPE SimpliVity is most compared with VxRail, VMware vSAN, HPE Alletra dHCI, Dell PowerFlex and HPE StoreVirtual, whereas Nutanix Cloud Infrastructure (NCI) is most compared with VMware vSAN, VxRail, VMware vSphere, Hyper-V and Dell PowerFlex. See our HPE SimpliVity vs. Nutanix Cloud Infrastructure (NCI) report.
See our list of best HCI vendors.
We monitor all HCI reviews to prevent fraudulent reviews and keep review quality high. We do not post reviews by company employees or direct competitors. We validate each review for authenticity via cross-reference with LinkedIn, and personal follow-up with the reviewer when necessary.
You should also consider a few basic details:
- What is the hypervisor that you are going to use? If it's VMware then both of them are good. AHV has limitations and I have seen my customers suffering as they grow. Do not use AHV, let them refine it more.
- Do you want a hardware independent solution? If so, then HPE SimpliVity is out. If you are paying for 3-5 years of support, services, warranty, and licenses then it is irrelevant.
- Accelerator card - one more point of failure apart from OVC with Nutanix is that it is only Acropolis.
- High Availability - Nutanix is faster doing fail-overs
- Backup - more or less the same on esxi platform.
- Replication - Nutanix is better doing replication between the sites and is easy too.
- Storage Cost: Sales team of both the products lie when it comes to tell you how much they are going to consume. But with SimpliVity, at least in their config, they keep around 100-200GB of RAM for buffer.
- Performance - Both the platforms with identical hardware offer more or less the same performance. With SimpliVity, the OAC really gives you a good performance.
- Support - Nutanix is better, no doubts. When SimpliVity used to be SimpliVity, they had good support services.
- Containers - Better to work on Nutanix, however, if you are going to use vRealize Automation then both are OK.
If you like doing stuff by yourself and are well versed with VMware products, then try VMware vSAN with vSAN ready nodes and you will be amazed. Check each and everything that Nutanix salespeople say on the internet.
Similar to Mikes comments above, we evaluated both these products and Cisco Hyperflex and ended up selecting Nutanix. Our legacy platform was all HPE so they had the foot in the door from the start, however, it soon became clear that the roadmap for HPE is vague with SimpliVity and whilst it had some advantages over the others, they were few and relatively minor in our selection criteria. We needed a platform to support HyperV and whilst all three could do this, HPE could only support this with SimpliVity on a very expensive configuration that commercially blew them out the process quite early. Cisco had a good offering and could potentially deliver a good solution although whilst they challenged regularly, we still felt they were playing catch-up in this space. There is a good reason why Nutanix is selling HCI platforms in large numbers and why Gartner ranks them top in the Magic Quadrants, the key differentiator for us was the overall approach to whole lifecycle and support offering that came with the product. Something I think that Cisco and HPE need to take a step back and look at more with customers as well as their technology offerings.
HPE, in my personal research opinion, is struggling to gain momentum within the HCI space. The move from a dedicated hardware card to software enablement was a good move. Yet it does bring the question of do I want to move to an HCI partner that now runs on V1 release software? Do I want to work through the bug list to help HPE improve a product? Financially the product brings no benefit over the other HCI players.
Nutanix for me would be the preferred HCI product between these two. Reasons would be because of multiple stable releases and continued growth. I can choose which Hypervisor I want to run be it AHV, HyperV or VMware. I can also change at any stage should I wish to do so. I could transform applications in AHV using containers and spin up my dev workloads there. In the interim business, I can continue running on the hypervisor trusted for workloads while the teams build confidence using AHV. Nutanix is now focusing on feature richness and transformational approaches while allowing you to choose your hardware vendor of choice with full support.
The negativity of Nutanix is that you pay double hypervisor costs to do the same thing. When acquiring Nutanix, make use of AHV and the strength of the base integration. Thus drop VMware which scares most enterprises, unfortunately. HyperV is not largely adopted in many enterprises thus the double bill on hypervisor is not so bad. Yet when moving to Azure or AWS the hypervisor is not a consideration for technical staff.
You'll notice that HPE doesn't really talk that much about SimpliVity anymore. They also signed a global agreement in April to run AHV (Acropolis Hypervisor) on HPE hardware for their hybrid cloud offering. Makes you wonder why they wouldn't use SimpliVity as the platform for that.
Truth is, SimpliVity had some good features (scalable compute, erasure coding and insane data reduction). However, it's limited to VMware for a hypervisor and the impressive data reduction algorithms absolutely kill performance.
On the other hand, Nutanix runs on multiple hypervisors and hardware platforms. Plus AHV has a multitude of features that improve efficiency and performance. And it's going to be around awhile.
The advantage that Nutanix has over SimpliVity is that it is a distributed storage fabric that runs in the application space and is not dependent on any single brand of hypervisor. Nutanix can run on VMware, Hyper-V, KVM or Nutanix’s own Acropolis hypervisor. Nutanix is a scalable software solution whereas SimpliVity is a hardware solution dependent on a specialized ASIC. You can run Nutanix on IBM, HPE, Dell or just about any commodity hardware and the user interface is very simple. Also, with the hyper convergence controller (CVM) decoupled from the hypervisor and hardware, updating Nutanix is non-disruptive.
You should consider a few basic details:
- Hypervisor – AHV vs VMWARE. Although VMWARE is a master in virtualization, for start-ups, AHV can server the purpose (commercial impact).
- Hardware independent solution- If so, then Nutanix is a good option.
- High Availability - Nutanix is faster doing fail-overs.
- Replication - Nutanix is better doing replication between the sites.
- Storage Cost: SimpliVity keep aprox. 100-200GB of RAM for buffer.
- Support - Nutanix is better, no doubt. When SimpliVity used to be SimpliVity, they had good support services.
- Containers - Better to work on Nutanix, however, if you are going to use vRealize Automation then both are OK.
I agree with Shu and Mike. There is a lot more support and more features that Nutanix provides than any other HCI. There are not hardware complexities like in SimpliVity. You can use any vendor of your choice and go with Nutanix HCI, also use one hypervisor for production and another for DR. A way to save costs on a DR hypervisor is to use AHV in production and use VMware or Hyper-V based on your choice. Nutanix also provides native file services for connecting to physical servers, data protection services including DR, which I prefer most. Lately, Nutanix supports even SAP HANA-like workloads.
You should make a final decision based on your requirement, present pain points, specific features on HCI that can help to address any or all of your pain points.
Agree to everything Shu has said. HPE has announced a partnership with Nutanix, that has to be a sign of what's to come for SimpliVity. Nutanix has done a good job of acquiring companies that add value to their portfolio. They have also come a long way with their built-in hypervisor AHV. It has a lot of the same basic functionalities of VMware.