Pgzybd0n 400x400

HPE Ethernet Switches Review
Used Cisco Catalyst Switches – changed due to cost of POE ports compared to HP.


Valuable Features

Some valuable features include cost per Gigabit Port, Layer 3 Capability, POE Support.

Improvements to My Organization

By reducing the need for an in-line power source over Ethernet using injectors for small devices, we are able to power wireless access points. Additionally, cameras, and telephones from a single device.

Room for Improvement

Additional Routing Protocols, such as OSPF could be implemented for larger scale Layer 3 capability.

Use of Solution

I have been using the solution for 2 years.

Deployment Issues

No issues with deployment.

Stability Issues

No issues with stability.

Scalability Issues

No issues with scalability.

Customer Service and Technical Support

Customer Service:

Excellent

Technical Support:

Excellent

Previous Solutions

Cisco Catalyst Switches – changed due to cost of POE ports in Cisco compared to HP.

Initial Setup

Very straightforward. The system was pre-programmed with an ip address – simply attach to the ip address and program. The system acts as a normal switch before turning the other functions on.

Implementation Team

In-house team.

ROI

350% due to stability in the product, low power use, and administrative requirements such as down time.

Pricing, Setup Cost and Licensing

$3158 for the switch itself. $288 in costs over 3 years for Power and Cooling.

Other Solutions Considered

No, due to the cost.

Other Advice

IF new to HP, read the documents. The OS is different than Cisco.

Disclosure: I am a real user, and this review is based on my own experience and opinions.
2 visitors found this review helpful
Joseph marzulla li?1414334011Anonymous avatar x30

2 Comments

Michael wolff li?1414339191
Michael WolffConsultantTOP 20

Regarding OSPF, which switches did you use? Ignoring the ComWare range (and their SOHO products), HP has clear delineation between their switch ranges that goes back for over a decade which makes it easy to select the right solution:
25xx = Pure L2 switches, supporting most L2 technologies including QoS, VLANs, PoE/+, etc. Excellent for edge where cost is an important factor
26xx = 10/100 L2/L3-lite switches. Similar to the 2500 series but adds static routing
29xx = GbE L2/L3-lite switches with static routing and high-speed stacking
3xxx = Full L3 stackable switches switches. Supports Most L3 routing protocols (RIP, OSPF, BGP4); latest model (3800) includes high-speed stacking and redundant PSU
40xx = L2 port bucket. These are crap, don't waste your money
5xxx = Full L3 modular switches. Same features as the 3000 series but adds redundant management modules, 40GbE (in the latest revision) and the ability to embed appliances/file servers within the switch itself
All HP switches are full dual-stack IPv4/IPv6

Like (0)21 June 15
Luciano morales li?1428451837

I´m using the HPe Aruba 2920 switches, they are great! Cheaper than Cisco plus easy to setup and manage. The only thing were cisco is better is in the documentation.

Like (0)08 November 16
Anonymous avatar x30
Guest
Why do you like it?

Sign Up with Email