The setup is very different from other solutions. It just needs to be connected, and the user needs to put in the username, password and then the OTP (One-Time Password). 

We have a team of five experienced managers and engineers who maintain the solution.

The initial setup is easy. I deployed the solution on my personal device quickly, within minutes.

The initial setup is fairly straightforward. It's pretty easy.

When you are set up and working, there is not much to maintain. 

The only thing to note is that if you set up that policy to scan your PC, you need to stay up to date on what your desktop team is doing. 

For example, you must be aware of your Windows version, or your antivirus, and address the policy accordingly.

The solution is easy to deploy once you spend a few hours planning and conducting security assessments to ensure they align with customer requirements. Deployment when customers already have Cisco Security hardware or software in place takes two or three hours with one hour of that time dedicated to installation and testing. 

I'm not handling the setup process. In this organization I don't have access to that. I have very limited knowledge in that area. I use it simply for connecting to the client network.

The initial setup was straightforward and took me about ten minutes to deploy the solution. The deployment process for Cisco AnyConnect is straightforward. I downloaded it from the organization's homepage, following the provided version and manuals. Configuration files and information are usually sent through a separate channel for security. Once downloaded, I set it up, and it has been running on my PC since, without any hassle. No team is needed for deployment and maintenance. The instructions are clear, and it is not a large or complex task.

I would rate the setup process a six out of ten. It was manual work, and though the configuration was easy, we still needed to understand it. But overall, It was a fair experience.

The setup of the Cisco AnyConnect Secure Mobility Client was easy, it did not take a lot of time, approximately one hour.

The product's setup phase depends on the kind of use cases for which a person wants to use it. In general, the setup process is not very critical, but you need to create a VPN rule so that you know who can access the tool and what the limitations are, after which the potential users of the product can get access to it.

For the product's deployment phase, users need to be created for a steady account, and then ensure that the VPN gets created, after which the company needs to give certain permissions to the users, following which we need to share with them the URLs and everything.

The solution is deployed on an on-premises model.

I need two to four staff members in my company to handle the deployment and maintenance phases.

It's a moderately complex installation and configuration process, not overly complicated.

The time depends on the specific features and stages involved, like designing, implementing, and configuring. 

For a full deployment with access for 100 users, it might take around a week. A basic configuration and installation could be done within two days.

In terms of setting up the Cisco AnyConnect Secure Mobility Client, there's no need to install it in my case because it's pre-installed centrally as part of the package my company has. My team didn't waste any time on the installation because you can use it right out of the box.

In my company, the Cisco AnyConnect Secure Mobility Client was pre-installed and pre-configured.

The initial setup of the Cisco AnyConnect Secure Mobility Client is simple. We only need to down the solution from the Portal and fill out a couple of VPN-related information, and then we are all set to go.

It is simple to set up the product. It's not overly complex or difficult for me. 

In this particular organization, it came pre-installed. However, I had installed it. That was at another company. I just got the application and installed it on my local server, and used the documentation provided to handle the process. 

It took about 15 to 20 minutes to deploy the product. It's very fast.

The setup was easy. We had vendor support. The vendor support was good. The local vendor was good here. 

We spent around a week finalizing the deployment.

Complicated scenarios are difficult to deploy. On a scale from one to ten, with one being the most difficult, I'd give a rating of between two and three for the initial setup.

We used Microsoft SCCM to deploy the agent, which was already deployed at the customer's organization. We had two to three team members who worked on the deployment, and the deployment took three months.

We provide 24/7 maintenance of the solution to our customers depending on the SLAs.

The initial setup is straightforward. 

The solution is easy to set up. It's not complex or difficult. Configuring it and everything might only take about one to two hours. 

The initial setup is easy. It's straightforward and not overly difficult or complex. 

The setup is very quick. It doesn't take more than two minutes. 

The solution is supported by our help desk, which is comprised of about three people. 

The initial implementation process is simple. 

The size of the deployment depends on the amount of personnel you'll need, however, in our experience, we've only ever needed one or two people to deploy it. 

After we get an order from the customer, they have some admin work to be done, which takes probably up to two weeks or three weeks. After three weeks, we have the project manager and the engineer assigned to the opportunity. Then, it might take up to ten days.

Maintenance is minimal. We may only need one or two people to handle maintenance. We don't have many issues with the solution.

It is included in the standard software package. I didn't need to install it. The IT department generates the default configuration of the laptop. In the end, it was already there and fully configured.

The setup of the Cisco AnyConnect Secure Mobility Client is complex. However, once it has been done many times it becomes standard and not difficult.

The initial setup was pretty simple. However, we did have onboarding support assist us with it. Our network administrator at the beginning of an install will always call Cisco support to get the expert on the phone. They provided us with white papers on how to do the setup allowing any setup moving forward is done correctly the first time. We did also purchase the premium support, for which there was no additional fee for the installation guideance.

The initial setup was straightforward and very simple. It was not overly complex or difficult.

The initial setup was easy. I could easily integrate the solution with the active directory. The deployment was relatively easy for our networking engineers to do. We have two engineers managing it.

The deployment process involves knowing the requirements, ensuring that we have integrated a VPN device with a proper bandwidth, and learning how to configure it.

The initial setup is very easy, it takes less than five minutes. We have more than a thousand users. We have an IP support team that manage any issues that arise. 

The initial setup was done by the Central Administrator.

All that I can say, is that when I received the computer it was working and I had no issues with it. It was set up well by the administrators.

The setup process can be a bit of a hassle, taking around seven minutes to complete. However, it's something we can manage in-house, and for our needs, it has been sufficient in providing secure remote access to our data center.

The initial setup is straightforward and can be done without the assistance of an external team. However, it does take some time to install.

Cisco AnyConnect Secure Mobility Client is simple to set up.

The initial setup is very straightforward. 

Cisco AnyConnect Secure Mobility Client was installed by our IT team.

The setup was easy and completed in one day. 

The implementation is quite easy - if the person is aware of the right version. The only challenge that I have been facing with Cisco VPN is the version. If we are using an independent version, it's next to impossible. Therefore, we have to always ensure that we are using the right version of Cisco VPN, as there are multiple versions available on the internet and one can download anything. 

Once you are using the right version, it hardly takes more than five minutes to set everything up.

The initial setup of the Cisco AnyConnect Secure Mobility Client is very easy. The link for the solution was given to me by my headquarters and I installed it. Initially, we needed separate login credentials, but now we only need to use our normal corporate login credentials to log into the solution.

The initial setup was straightforward. Anyone working from home uses this solution and we have around 1,000 users. 

It is easy to set up. It's not a problem at all. There are no issues with complexity.

The initial setup is very straightforward and simple to set up. It's not overly complex. 

From the handling side, the initial setup is quite easy and straightforward. From a customer endpoint, deployment only takes about two to three minutes. To deploy the solution centrally, usually, a company can expect to spend four to five hours on it.

It's my understanding that the initial setup was pretty straightforward. It wasn't overly difficult. 

The initial setup on the client side is very easy, and installation takes a maximum of ten minutes.

Installation is very easy.

The initial setup is straightforward. In my opinion, it was not complex.

We have found the initial setup to be very simple and straightforward. It's not overly difficult or complex to implement. 

The deployment only takes about ten minutes. 

We have a security team of five technical operators that can help deploy, maintain, and monitor everything. 

The initial setup is very straightforward. The only challenge is setting it up when you're already remote, which can be difficult. If you are in the office and on the network then the setup is really fairly simple.

The initial setup is straightforward.

My laptop had the solution installed on it by my IT department.

I am not the IT person who installed AnyConnect initially. From my end, I just input the username and the password. That's it. 

The initial setup is usually straightforward. It's not overly difficult. It's all in how things are communicated. If things are communicated in an easy way, then it's not an issue at all.

The solution is pretty easy to set up. However, you need to be technical. 

The initial setup was straightforward.

I have installed it on my PC and I did not have to connect all the IP addresses and stuff but the setup was simple. 

The initial setup was pretty simple. It's not too complex.

The initial setup was straightforward.

The initial setup is straightforward. We have two to three people who maintain this solution. 

The initial setup was straightforward. 

The initial setup was easy. You just install it on the computer and it starts working.

The initial setup was very straightforward.

On the client-side, the setup is very straightforward. However, on the server-side, it gets a bit more complicated and users should be aware of that.

The initial setup was straightforward.