The major purpose of our using Cisco Enterprise Routers is to terminate the 0.2 internet links because we don't use net features on the router. We prefer to configure NAS and other publishing through Cisco activities. We use the routers to create GRE channels with our different sites.

We use Cisco routers, firewalls, switches, and the Cisco Eyes and NAT solution in our environment. I have also done some R&D to implement mass cloud infrastructure for my client.

We're using the ISR series at the moment. The version is 4451 or 4431. These are public routers. We have permitted our major internet links on these routers.

This is an edge device for my organization. Normally, the enterprise company has one or two Cisco routers because they use it for internet termination and PLS termination.

I am using version 16.4 of the ISR router.

In my case, I use Cisco Enterprise Routers for voice communication systems, so I need a specific coverage of service between the sites. In our company, we use switches that are validated and certified by our suppliers because if it is not working with them, then we cannot use them. Sometimes, we use Aruba in our company, while at times, we use Cisco, depending on the manufacturer or system supplier. Sometimes, it gets difficult when you mix some things from one supplier to the other, but the product works in the end.

I am the head of enterprise and business, leading the presales, system and network architecture teams. 

We use this tool as an IP VPN connecting 50 to 60 branch networks.

I use Cisco routers in my company to provide internet connectivity to all our devices, such as computers and WiFi. Essentially, I use these servers to facilitate internet access for the entire company. HPE is the server we are using in our company.

The primary use case depends on the customer's kind of business. From my experience, I'm serving clients with the enterprise internet gateway, BGP router, and internal enterprise campus network for our enterprise networks, et cetera.

We primarily use the solution as a router, for virtual routing connections. 

There was a need to connect remote offices. They numbered at least 18, which is why we had to deploy routers that also supported SSL and VPNs. We then built this wide area network using MPLS. As a result, we used service providers. They are three MPLS services, and we built an IP-based network for a large area at the time.

We mainly use the solution for a branch router, and it works very efficiently. We use it for data centers and servers. 

We primarily use the solution for connectivity and routing. It offers secure panel access. 

We have been using Cisco Enterprise Routers for building micro-networks and Internet networks for main VPN services, high-speed Internet access, and extending the network of customers.

In my company, the tool is used mostly in our branches.

We use the solution to create a secure connection between IT devices and the ISP network.

We use Cisco Enterprise Routers or WAN connectivity and switching in multiple areas, such as data centers and branch offices.

It is used for small to medium businesses. Nowadays, there are so many other routers with different operating systems, XR, and DSR that are available for service providers in other data centers.

Cisco Enterprise Routers are used when you have networks with multiple branch offices connecting to a single point. 

We primarily use the solution for our final customers. The solution is used for communication. We are a service provider, and we offer our customers public networks as a service. Our customers typically need an internet connection or MPLS.

We use routers for communicating between different networks.

I install this solution for clients. We are a service provider.

I use the router to connect to the internet.

We use this solution for communication between banking branches, and connecting those branches to Head Office.

Our company was contracted to change switches and routers for government offices, clinics, police departments, and armed forces. 

The solution was part of a massive upgrade in technology government-wide and we were one of many subcontractors working on the project. 

The statistics show you a full brief of every user, every type of connection used, and the total bandwidth used. We control our VPNs through it and our actual line of defense for our security is the Cisco firewall. We have four different fiber connections and two satellite connections connected to our offices. They all load balance through Cisco and another analytics device. It integrates very well into our network and we find it to be extremely robust and durable.

We use the solution for SD-WAN. 

This product gives us connection to providers in the international network. We are customers of Cisco. 

I use this solution for edge connectivity. It provides connectivity between our offices and the cloud.

We use this solution primarily for branch connectivity for our customers.

The primary use for this solution is to connect branch networks to the head office.

I use Cisco Routers in a variety of technologies, including TLS, BGP, OSPF, EIGRP, VRF policy-based routing, and VPN in some routers.

We use IOS XE version 17.

We use this solution for interconnecting our branch offices. We have six branches in addition to our head office.

All of our routers are on-premises deployments.

I use the solution as an administrator and have experience with VPNs.

We primarily use the solution for connecting clients. It's for routing purposes.

We are using Metro circuits to connect branches on the different bins and I use Cisco Enterprise Routers to route the traffic.

I use Cisco Enterprise Routers for connectivity. I have five branch sites and a headquarters. We use these routers for connectivity between the branch sites and the headquarters where I'm using SAP.

I am working in a cloud company with multiple clients, who are purchasing multiple could services, servers, and small networks. We deploy a Cisco firewall and a virtual firewall.

I'm a Cisco specialist, and I implement Cisco devices, not always just for myself. We consult, implement, and design Cisco devices for our customers according to their needs and requirements. Just for the record, I am the CEO of my company: Atin Secure Systems ltd.

Cisco Enterprise Routers are used to connect our headquarters to the other store.

We use this solution for network communication and connectivity.

We use the on-prem deployment model. Our primary use case is for connection to the internet. For example, it's my connector to the point then the user internally browses. It's my router and a switch, just for small business clients. We use it to connect to the internet. 

We use Cisco Enterprise Routers for Border Gateway Protocol (BGP), internet services, and IP transfers. We use it mainly for an internet gateway. 

Cisco Routers have the native translation that we need for a couple of extra networks. They also provide firewall protection for our system.

We use Cisco Enterprise Routers for networking and security.

It's our network device.

We perform immigration checks in Pakistan. We have around 26 distributed check posts across Pakistan. We need network links to collect the data, implement the stop list, and other immigration-related data.

We primarily use the routers for internet and wire connection.

We use the solution to connect our network to the internet.

We use Cisco Enterprise Routers mostly for the core network and in a satellite network. We use the equipment to connect our equipment to the internet and provide a robust infrastructure to satellite equipment.
It's a complement of the satellite network, and mostly all the switches and routers that we use are from Cisco. Only the permanent equipment for our modems and the modulators are satellite equipment.

We use Cisco Enterprise Routers in the WAN solutions.

This is a solution that I integrate for our customers.

Cisco Enterprise Routers are helpful to connect customers to service providers. We can use hardware or software, such as SD-WAN. The Cisco antenna for SD-WAN is good. The solution is an easy setup.

We are using it as a voice gateway. We need to connect with PSTN, and we are communicating with the outside world through this router.

These routers make up part of our critical network infrastructure.

We are mainly using this solution for networking and as a firewall.

The primary use case for some of our customers is to build their network. Others want to upgrade their networks because they have expanded their office or have new offices or new buildings.

We use the solution to terminate connections at the edge of the network. It helps us handle tasks such as removing MPLS circuits and voice routing for unified communications.

We are a payment gateway company and we use Cisco Enterprise Routers primarily for connecting with our partners outside on the point-to-point fiber VPN IPsec.

We primarily deployed the solution in IP VPN configurations from the head office to branch offices and other centers. 

Currently, in Nepal, there are no advanced Enterprise Routers. This is just for routing and VPN supports.

I use this solution to design and build my network. 

We primarily use the solution for the router. It could be H branches router, the MPLS router. or the border gateways router.

We use this solution for secure, site to site data interconnection.

We are a reseller of Cisco Enterprise Routers with around 10 clients using Cisco's enterprise equipment. The deployment model (on-prem, cloud, etc.) varies between the different clients and the routers are mainly used for either routing or Voice over IP. We also work with D-Link and HP in addition to Cisco.

I manage Cisco Routing and Cisco Switching.

We are using the Cisco product in the core Banking industries, and Linksys products are being used in educational institutes and small enterprises.

We are using Cisco switches as a core switch in the Education sector, such as engineering colleges or in small colleges but in the main colleges, we are using the Cisco switches. 

The primary use case of this solution is for parallel branches in the banking sector for the cloud and with IPSec.

We use these routers in our data centers, in several places.

We are using Cisco Enterprise Routers for network switching for an education institute.

We are using Cisco Enterprise Routers as a network gateway, PBX, and firewall.

I use the solution to manage the centralization of our networks as well for an internet connection.

Our client primarily uses the solution for a Computer Base Test Center.

Our primary use for this solution is MPLS and Internet routing.

I am a network architect and this is one of the solutions that I have worked with.

The primary uses are routing, voice gateways, and voice-over IP. We have approximately 600 users in our organization.

We use the solution for our DataCom Network and various others.

We use Cisco Enterprise Routers for implementing properties and features.

We primarily use these routers for establishing connections between different sites. These connections allow our users at different locations to access the network.

We are resellers. We provide products for our clients.

I am using this solution for my network in the office.

We mainly sell it to the government departments, who also use it on-premises for their LAN.

Installed at many locations using a hub-and-spoke design to connect remote sites to central locations over GRE tunnels.

Cisco Enterprise Routers can be used for network connectivity. You are able to connect two networks together, such as an enterprise to the cloud.

We are not a big organization. We are using Cyberoam and Cisco Routers for our traffic. We are using the 5501 model.

I use the solution for internet access. 

Our primary use for this solution is for Internet access and firewall.

Our primary use for this solution is as an internet gateway.

What we do is build a private point and then connect to the Internet. It's basically a dynamic multipoint virtual VPN. 

We are a solution provider and Cisco Enterprise Routers are one of the products that we implement for our clients.

The larger routers are used in an organization's headquarters to connect with the branches, which use smaller routers. It acts as the backbone for networking between the main branch and branch offices. 

We are a solution provider and we offer Cisco equipment, including their Enterprise Routers

These routers are primarily for internet edge connectivity, as well as wide area network connectivity.

This solution helps us with our inter-network constitution, and that works for us.