Our company employs eight Cisco-certified engineers who implement the solution for customers. 

The deployment can be done in-house without any consultant.

The deployment of the solution is quite fast. It can be done in half an hour. To deploy the switch, we need to set up the switch IP and ensure the versions are right. Then we should set up the VLAN. We must also take care of the authentication method. Some users might need to authenticate themselves with certificates.

When we need to set up a device in a new building, we can copy the relevant configuration to speed up the setup.

I planned the deployment, and we just paid for the technician to install the cable, and we control the process. It's not very hard. It's not necessary to use an integrator.

We implement the solution with the help of Cisco partners.

When we deploy anything, we rely on support from the product vendor or partner who sold them the product. The support available from the vendor or partner made it easy to deploy anything. They provided assistance with configuration and deployment.

We have Accenture as our global partner, who handles the deployment process for us. They are the ones who do it for us.

We have an in-house technical support team that maintains our network. There are three people on the team.

We handle the setups in-house. 

We did the deployment of Cisco Linksys Ethernet Switches in-house. The maintenance is outsourced to a company, we only need one mid to senior-level engineer for support.

We have a third party install our Cisco Linksys Ethernet Switches and configure them.

The deployment was completed in-house.

We handled the implementation ourselves in-house. We did not have the help of any consultants or integrators. 

We have our own network team for implementing this solution.

We used a consultant for the deployment.

This deployment comprised a technical team of around 20 or 25 people, consisting of engineers, managers and administrators. 

We did not use a vendor or reseller. We use our experts in our network who have excellent experience with every Cisco product.

I implement the product by referring to the documentation available on the internet in case of any technical errors.

I'm able to set up the solution on my own. I don't need any integrators or consultants to help me.

I did the deployment myself. 

I deployed it myself. 

We have an internal employee that knows a lot about Cisco and was able to help us with the setup and configuration.

We have an in-house technical team but we also use consultants.

We have a team of approximately three people that handle networks, among other things.

We handle the implementation ourselves.

You can do the installation yourself.

I handled the implementation myself.

We implemented this solution with our in-house team.

I sometimes deploy this product myself, but other times, we have a company that works with us and they configure the services. We have ten technicians who can work on these switches.

We did the implementation of the solution.

We have approximately two engineers that do the maintenance of the solution.

Our in-house team handles the installation. Once it is complete, I take care of the next steps.

As integrators, we can handle the implementation process for clients. 

We have an external team to manage the switches. We outsource a team for maintenance.

We implemented this solution with the help of integrators.

I completed the implementation for our customers. I am the system engineer and provide this service for all of my clients.

Most of the clients don't understand what is going on with the devices. They would need help if they were to do implement it on their own.

I can install it myself.