We performed a comparison between AirCheck G3 and LinkRunner based on real PeerSpot user reviews.
Find out in this report how the two Network Troubleshooting solutions compare in terms of features, pricing, service and support, easy of deployment, and ROI."AirCheck G2 gives me an overview of which channels are used by the access points or who delivers the Wi-Fi, which gives me a clear picture of what's going on."
"The airCheck is the real-time spectrum analyzer to see clients that could be connecting to our network, not just rogue networks out there, but rogue clients and other interference in that particular spectrum."
"The ability to push data to Link-Live is really important. On the main screen, you can see all the system parameters, and then you can also go and see all the current systems that are operating. They all have different SSIDs or system identifiers, and you can see all SSIDs that are operating in a certain area. Being able to see that and being able to dive into each one and figure out what frequency it is operating under is valuable."
"AirCheck has a feature that lets you play a tone so you can track down a rogue AP based on the RF signal. That's a cool feature. It can also help you identify interference like microwave ovens or Bluetooth devices. I also like the ability to link it to your online account. It sends a report via email and saves it on the cloud."
"It is a pretty rock-solid device that is well-built."
"The solution saves us a factor of 10 in time. If a typical WiFI ticket would cost me two hours with AirCheck, then it would cost me 20 hours without it. At 20 hours, you start to refuse to do tickets because it is just too expensive."
"The information provided by the solution for resolving connectivity and performance problems is very thorough. The reporting functionality is extremely good as I can pass that information on with little input. The device will identify issues and problems, e.g., the diagnostic material. When you have Internet access, it sends the information to your email address, which is very useful."
"The AirMapper Site Survey on the AirCheck G2 is the most valuable feature. It is really nice to be able to upload the maps remotely to the website, and then have the analyst upload the results so we can review the data."
"AutoTest is very helpful. It's very streamlined and it's very easy to set up and very easy to identify what we want to achieve. It's probably the feature we use the most. It provides us with LLTD, which is very useful."
"The LLDP decoding is better than on some of the other devices that we've used. Specifically, it goes beyond the minimum of the LLDP data to decode, and it shows the LLDP port descriptions. That makes it vastly simpler to identify which port you're connecting to on a switch that's patched back to some other building, rather than having to figure out an SNMP index or something else."
"It provides a way to test 10Gig connectivity. Previously, we had to hook up a switch. That was our only way. Now, with LinkRunner, we can test on the fly if an SFP is bad or if the switch has the right configuration on it."
"I've found the VLAN test feature to be most valuable. That's because not many devices do VLAN tests. Normally, I have to send a center technician to check a line and see if it's alive. If it's working, then I have to send a network technician out to log into a switch and see which port it's on and on which VLAN that port is. That's two persons and two separate visits. This device does all of this in a matter of seconds, and that has saved me a lot of time, troubleshooting, and resources."
"Having the results sent directly, via email, from the LinkRunner itself makes it really great for logging different things that you're trying to document within your organization. You can have a paper trail of what your organization has as far as infrastructure goes."
"In terms of documenting ad hoc additions and other changes to wired ethernet connections, this product is very good. It keeps the information in the cloud and I have the ability to name it. This makes it very nice and easy to see."
"In terms of network validation, and copper and fiber Ethernet configuration, I can't imagine life without LinkRunner devices. The minute I got the 10G, everybody was fighting over it. They had never used such a device before and it was just breathtaking for them to very quickly see the validation you can gain from these devices."
"The solution's ability to simplify network validation and configuration of copper and fiber Ethernet networks is very useful to me. Otherwise, I’m guessing. Having a tool that I can trust doesn't solve all problems, but for the problems it solves, I can trust that it has told me “yes” or “no.” I would rate it highly for that."
"I would love to have a button that pretends that you're an iPhone 5 or an Android Samsung, then tell me what you think the experience is. This is a very difficult thing to do because each of these things has different radios in them and behaves differently. Now, I can go into the user's office, and say, "The tool says everything's green. The WiFI infrastructure is fine, but their iPhone experience sucks." Is it a problem with their particular iPhone or is it a problem with any iPhone model? If I could have this solution emulate an iPhone model so I can walk into that room, and say, "My tools pretending to be your iPhone and it works fine. It must be your particular iPhone that we have a problem with." I found mobile phones in general have lousy radios and the coverage isn't strong enough, but it would be a nice feature."
"It would be nice if I could import an AP list with a MAC address. When it looks at access points, it should tell me the AP name instead of the MAC address. When you get a MAC address, you could eventually find out where you want to go. However, a lot of times, if I just have an AP name, I know that's in this area or that's over there. I would like that function because AirMagnet, which is the precursor of this, had that ability where you could basically import a list of APs and MAC addresses, and then it could display those instead of just a MAC address."
"We use .1x authentication, so I need to download the certificate onto the device. It would be nice to have this functionality through the cloud as well. Right now, you need to do it through the software by connecting your laptop physically to the AirCheck. This is one thing that is a bit slow."
"The solution doesn't have much functional information online."
"I would like them to modify the interface. The button to change profiles is fairly small. When you have interventions, it is not always possible to have a ballpoint pen or perfect precision touch with it, since sometimes you need to touch it quite a lot when your hands are very dirty. I would like a special pen that is compatible with that responsive screen. That would make it easier."
"NetAlly has been behind the curve on visualization, Wi-Fi design, and heat maps for a little while now. They're perfectly aware of this deficiency, but what they offer is good enough for a lot of people. It's not suitable for larger shops, but it works in a pinch. The AirMapper and subsequent AirMagnet integration is an afterthought."
"We use these out in the field, and because they're not allowed on our network, we usually have to have the person take them home and provide backhaul to them. In other words, they are not allowed through our firewalls to dump the data. So, we have to have them go to a separate wired network to dump the data. There could be an option to put an LTE and have a phone engine in it so that you can buy a SIM card for it and have it use cellular to download the data. That is something that would be nice to have. That's a little kink in this system right now. Other than using the Ethernet port to download data, it'd be nice if we could use either LTE or some other way to get the data that was collected by AirCheck G2 to our Link-Live portal."
"The biggest improvement would be an easier upload over wireless to Link-Live. Currently, the device has to be patched into the Ethernet. The wireless upload has been giving us some issues."
"They should allow firmware updates even if you don't have an AllyCare contract. I'm in a situation right now where they've released firmware for bug fixes, but we cannot access those, which makes the device almost useless. You almost want to just throw it out the window because they're not supporting their product unless you have an AllyCare contract."
"It's a bit bulky. It would be nicer if it were a little bit smaller and packed with all its features. I would also like it if the screen were a bit bigger."
"I wish they had software that could create continuous streams of traffic. I'm not sure if that's possible with LinkRunner, but it would be very helpful in some of the test case scenarios that clients are looking for, in regards to quality of service"
"Unlike using an application like Wireshark, this device gives us no way to see network packets specifically to look at what's going on. It doesn't have the capability."
"One of the things I'd like to see in future versions of LinkRunner is a wireless dongle embedded into the product so that I don't need to have a separate wireless dongle. It should be built into that."
"A feature that I would like to see is the ability to send a tone down the cable. That would be great. I have to use a separate tool for that. If I'm trying to troubleshoot a cable that is not plugged into a network switch, I need the ability to tone."
"It is very stable. That being said, there is one feature that is not quite as stable as the rest of the product. You can leave it plugged into a location where you're doing some work and connect to it remotely by a program called VNC... sometimes that function breaks down, if you've been running for a couple of days... if you're remotely controlling it, you're probably not right next to it. That can be modestly annoying."
"Being really nitpicky about the LinkRunner G2, I wish the form factor was a little bit smaller. However, I'm sure that the size of the unit is compromised by the fact that the battery is large. If that were to mean having less battery life, I would not change it."
AirCheck G3 is ranked 5th in Network Troubleshooting with 13 reviews while LinkRunner is ranked 1st in Network Troubleshooting with 20 reviews. AirCheck G3 is rated 8.6, while LinkRunner is rated 8.6. The top reviewer of AirCheck G3 writes "A portable, rugged device that reduces resolution time and saves thousands of dollars". On the other hand, the top reviewer of LinkRunner writes "Single Auto-Test button gives me all the information I need on most jobs". AirCheck G3 is most compared with AirMagnet Survey, iTrinegy NE-ONE Network Emulator and NetAlly EtherScope nXG, whereas LinkRunner is most compared with NetAlly EtherScope nXG, LinkSprinter, OneTouch AT Network Assistant and IxChariot. See our AirCheck G3 vs. LinkRunner report.
See our list of best Network Troubleshooting vendors.
We monitor all Network Troubleshooting reviews to prevent fraudulent reviews and keep review quality high. We do not post reviews by company employees or direct competitors. We validate each review for authenticity via cross-reference with LinkedIn, and personal follow-up with the reviewer when necessary.
