We performed a comparison between AirCheck G3 and SolarWinds Network Configuration Manager based on real PeerSpot user reviews.
Find out in this report how the two Network Troubleshooting solutions compare in terms of features, pricing, service and support, easy of deployment, and ROI."AirCheck has a feature that lets you play a tone so you can track down a rogue AP based on the RF signal. That's a cool feature. It can also help you identify interference like microwave ovens or Bluetooth devices. I also like the ability to link it to your online account. It sends a report via email and saves it on the cloud."
"I also like the remote session and the ability to log in to the device remotely. You can log in to the tester with your computer and can see the screen and operate the tester remotely. This is a very cool function, but it's very advanced."
"The one-button AutoTest feature is an amazing tool. It works well. It tells you whether or not you have shorts in your network, your PoE+ is running low on voltage, and shows you your link speed."
"It is portable. It is rugged. It comes with a nice case. It has been dropped, but it doesn't break. I don't have a crack screen or anything like that. It has pretty good battery life."
"The AirMapper Site Survey on the AirCheck G2 is the most valuable feature. It is really nice to be able to upload the maps remotely to the website, and then have the analyst upload the results so we can review the data."
"AirCheck G2 gives me an overview of which channels are used by the access points or who delivers the Wi-Fi, which gives me a clear picture of what's going on."
"It is a pretty rock-solid device that is well-built."
"The auto-test, channel scanner, packet capture, and Link-Live integration are all crucial features we use regularly. The wired cable tester is also indispensable. We frequently run into problems during cable testing that are hard to pin down. When tracking down a cable problem, you usually need to plug something into the cable and ensure the cable plant is reliable."
"The most valuable features the solution offers are compliance, reliability, and information about reliability."
"Compared to other vendors, like NetBrain, managing the solution is easy. They made it very user-friendly."
"The most valuable Real-time fault detection is beneficial as it enables the identification of changes made to a device's configuration through the SolarWinds Network Configuration Manager. This makes it easy to pinpoint which configurations were added or removed, potentially causing network issues. Such changes are saved in logs for future reference."
"This solution has helped our organization by allowing us to store all the device configurations for the various network devices in NCM and making it easy for us to retrieve and look them over."
"I use it for monitoring the entire network for the company. We oversee nodes down, we oversee devices heading up to crossing the threshold for CPU usage. We oversee power so power backups on the switches, we oversee if they're down or if they're failing. We oversee any node down or any router from any vendor."
"We push all our configurations to the servers with ease and the logs capture almost all the transactions needed for an internal audit."
"It is pretty straightforward to set up."
"Configuration refers to the specific settings and options that determine how a device or system behaves. It can include things, such as network settings, security settings, and other options that are specific to the device or system in question. One of the most valuable features of the solution was its ability to track and monitor changes to the configuration of devices on a network. This can be useful for troubleshooting and identifying potential issues. By keeping track of who made changes to the configuration and when it can be easier to determine the cause of any problems that may arise."
"The solution doesn't have much functional information online."
"NetAlly has been behind the curve on visualization, Wi-Fi design, and heat maps for a little while now. They're perfectly aware of this deficiency, but what they offer is good enough for a lot of people. It's not suitable for larger shops, but it works in a pinch. The AirMapper and subsequent AirMagnet integration is an afterthought."
"The battery life needs improvement. For example, when you are doing an Ethernet test, that seems to drain the battery pretty quickly."
"It would be nice if I could import an AP list with a MAC address. When it looks at access points, it should tell me the AP name instead of the MAC address. When you get a MAC address, you could eventually find out where you want to go. However, a lot of times, if I just have an AP name, I know that's in this area or that's over there. I would like that function because AirMagnet, which is the precursor of this, had that ability where you could basically import a list of APs and MAC addresses, and then it could display those instead of just a MAC address."
"If it was capable of downloading MIBs onto the device, then we could identify the manufacturer. Sometimes, when I am troubleshooting, there is a Mac address. For example, there is a rogue device and it just gives us a Mac address, which is fine. It gives us something, which is better than nothing. It would be nice if it was able to download a MIB where we could associate it with that Mac address and the manufacturer."
"I would like them to modify the interface. The button to change profiles is fairly small. When you have interventions, it is not always possible to have a ballpoint pen or perfect precision touch with it, since sometimes you need to touch it quite a lot when your hands are very dirty. I would like a special pen that is compatible with that responsive screen. That would make it easier."
"It was hard to determine which AP was which because it only shows the MAC address. It'll also display the MAC address of the BSSID, so it looked like I had 12 APs in my house. If I have three access points and each is a dual-band with an SSID or BSSID for each radio, it comes out to about 12 APs. That's one of the bugs fixed in the latest firmware update, but it's only available if you have a NetAlly support contract."
"We use these out in the field, and because they're not allowed on our network, we usually have to have the person take them home and provide backhaul to them. In other words, they are not allowed through our firewalls to dump the data. So, we have to have them go to a separate wired network to dump the data. There could be an option to put an LTE and have a phone engine in it so that you can buy a SIM card for it and have it use cellular to download the data. That is something that would be nice to have. That's a little kink in this system right now. Other than using the Ethernet port to download data, it'd be nice if we could use either LTE or some other way to get the data that was collected by AirCheck G2 to our Link-Live portal."
"The only thing that requires some experience, and training doesn't fix, is how to set up your custom policy-based reports to check compliance."
"The Network Configuration Manager needs to improve the access control list compliance."
"Improvements are needed in the automatic network mapping function."
"I would like to see more integration tools. Something like dialysis, for example."
"For each device, when you open the network performance monitor, it will give you all of the information about the device, but many of the natural configuration management features are not on that page."
"When it comes to the way of managing the network devices, SolarWinds Network Configuration Manager should provide the simplest way that devices can relate to the server. For example, when we want to get the devices on board, we go by SSH to make the SolarWinds Network Configuration Manager create the connectivity with the device. After that, we pull the configuration. It would be helpful if they could combine both so that everything will be done in one step."
"Its customer service response could be faster."
"The network logs could be improved. When the error logs come across with those false positive alarms in the error logs."
More SolarWinds Network Configuration Manager Pricing and Cost Advice →
AirCheck G3 is ranked 5th in Network Troubleshooting with 13 reviews while SolarWinds Network Configuration Manager is ranked 11th in Configuration Management with 22 reviews. AirCheck G3 is rated 8.6, while SolarWinds Network Configuration Manager is rated 8.2. The top reviewer of AirCheck G3 writes "A portable, rugged device that reduces resolution time and saves thousands of dollars". On the other hand, the top reviewer of SolarWinds Network Configuration Manager writes "Network configuration is done well; great pricing". AirCheck G3 is most compared with AirMagnet Survey, LinkRunner, iTrinegy NE-ONE Network Emulator and NetAlly EtherScope nXG, whereas SolarWinds Network Configuration Manager is most compared with Cisco DNA Center, Cisco Prime, Red Hat Ansible Automation Platform, OpenText Network Node Manager i and VMware NSX. See our AirCheck G3 vs. SolarWinds Network Configuration Manager report.
We monitor all Network Troubleshooting reviews to prevent fraudulent reviews and keep review quality high. We do not post reviews by company employees or direct competitors. We validate each review for authenticity via cross-reference with LinkedIn, and personal follow-up with the reviewer when necessary.