We performed a comparison between LinkRunner and Observer GigaStor based on real PeerSpot user reviews.
Find out what your peers are saying about NetAlly, Wireshark, Auvik and others in Network Troubleshooting."I've found the VLAN test feature to be most valuable. That's because not many devices do VLAN tests. Normally, I have to send a center technician to check a line and see if it's alive. If it's working, then I have to send a network technician out to log into a switch and see which port it's on and on which VLAN that port is. That's two persons and two separate visits. This device does all of this in a matter of seconds, and that has saved me a lot of time, troubleshooting, and resources."
"The most valuable feature is the end-to-end testing with the "dart," as they call it, where you can test for faults in the cable or if they've been terminated properly."
"Performance testing is the most valuable feature. It gives a brief summary of the information we're looking at, such as latency, jitter, and the available throughput."
"The solution's ability to simplify network validation and configuration of copper and fiber Ethernet networks is very useful to me. Otherwise, I’m guessing. Having a tool that I can trust doesn't solve all problems, but for the problems it solves, I can trust that it has told me “yes” or “no.” I would rate it highly for that."
"I like the fact that I can tell the equipment to stop at a certain point during the test of a cable, to see whether or not there is basic connectivity. I can stop it before it starts pinging the outside world, such as Google or, perhaps, our core network switch. Those basic results—do I have a basic connection and power—finish up fast and I can move on."
"The AutoTest feature makes it easy for you on both ends. It's an excellent feature, especially if you're by yourself. You plug one end in and you hit AutoTest. It sits and waits for you to plug in the other end and it starts testing."
"AutoTest is very helpful. It's very streamlined and it's very easy to set up and very easy to identify what we want to achieve. It's probably the feature we use the most. It provides us with LLTD, which is very useful."
"In terms of documenting ad hoc additions and other changes to wired ethernet connections, this product is very good. It keeps the information in the cloud and I have the ability to name it. This makes it very nice and easy to see."
"I also have the ability to see an application's performance, to see what's going on, why a network is slow, why this program for this user is experiencing a delay or some network issue"
"This solution allows us to see exactly what is going on in the network and we can very quickly solve issues with users."
"There are many valuable features, but understanding end-user response times stands out. It provides a score-based evaluation of user experience, helping customers quickly pinpoint whether issues originate from the network, server, client, or application. Additionally, it facilitates in-depth analysis of application dependencies."
"The ability to capture packets. It is not only for monitoring. That is very important for a company that wants to keep an eye on the packets, the transactions, the flows..."
"It can help to write your rules, organize firewalls, your block, and also your protocols and IP address to come in or out of your network."
"It's able to capture packets and, after a long time, you can come and use that information; to check, to analyze - everything you would want to do. So it's very good and helpful if you want to protect your data. It is stored in a certain place where you can access it every time you want to analyze it."
"If it weren't for the battery, it would probably get an eight out of 10. But because of the battery, it's infuriating and it's not reliable."
"One area where LinkRunner could be improved is the battery life. Depending on which tests are run, it gets a decent six to eight hours. However, sometimes we need to do back-to-back shifts to meet a deadline, and we need access to an outlet to keep it plugged in and charging. It takes about an hour or two to charge."
"It's a bit bulky. It would be nicer if it were a little bit smaller and packed with all its features. I would also like it if the screen were a bit bigger."
"It runs tests quickly, but it takes a while to boot up. It's somewhat disappointing that LinkRunner takes some time to turn on. When I arrive in the space, I usually spend the first two minutes waiting."
"It is very stable. That being said, there is one feature that is not quite as stable as the rest of the product. You can leave it plugged into a location where you're doing some work and connect to it remotely by a program called VNC... sometimes that function breaks down, if you've been running for a couple of days... if you're remotely controlling it, you're probably not right next to it. That can be modestly annoying."
"I wish they had software that could create continuous streams of traffic. I'm not sure if that's possible with LinkRunner, but it would be very helpful in some of the test case scenarios that clients are looking for, in regards to quality of service"
"Being really nitpicky about the LinkRunner G2, I wish the form factor was a little bit smaller. However, I'm sure that the size of the unit is compromised by the fact that the battery is large. If that were to mean having less battery life, I would not change it."
"It doesn't turn off automatically, but the toning function goes to sleep. It seems to stop toning after five or six minutes if you don't find the cable. It could be up to ten minutes, but if you don't find the cable that you're trying to tone quick enough, you'll have to go back and restart the tone. So, it doesn't turn itself off, but while toning, it turns itself off."
"Maybe the graphical user interface could be simplified to allow people to use it more easily. It's already good, but they can work more on it to make it even easier."
"I would like to have more than 4TB of storage available in the portable version of this solution."
"GigaStor feeds into Apex. So, the area where there could be improvement would be in artificial intelligence. For example, the incorporation of more advanced machine learning or AI capabilities could enhance its functionality."
"Graphics need improvement. Because a lot of the information there you have to input first in some case to have full potential. It could be more automated."
Earn 20 points
LinkRunner is ranked 1st in Network Troubleshooting with 20 reviews while Observer GigaStor is ranked 14th in Network Troubleshooting with 7 reviews. LinkRunner is rated 8.6, while Observer GigaStor is rated 9.0. The top reviewer of LinkRunner writes "Single Auto-Test button gives me all the information I need on most jobs". On the other hand, the top reviewer of Observer GigaStor writes "Aids significantly in the threat-hunting process and provides a score-based evaluation of user experience". LinkRunner is most compared with NetAlly EtherScope nXG, LinkSprinter, AirCheck G3, OneTouch AT Network Assistant and IxChariot, whereas Observer GigaStor is most compared with Gigamon Deep Observability Pipeline, Wireshark, Kentik and Cisco Nexus Dashboard Data Broker.
See our list of best Network Troubleshooting vendors.
We monitor all Network Troubleshooting reviews to prevent fraudulent reviews and keep review quality high. We do not post reviews by company employees or direct competitors. We validate each review for authenticity via cross-reference with LinkedIn, and personal follow-up with the reviewer when necessary.