We just raised a $30M Series A: Read our story
Cancel
You must select at least 2 products to compare!
StarWind Virtual SAN Logo
9,627 views|3,662 comparisons
Sangfor HCI Logo
4,882 views|3,409 comparisons
VxRail Logo
53,997 views|40,995 comparisons
Top Review
Find out what your peers are saying about Sangfor HCI vs. VxRail and other solutions. Updated: September 2021.
542,029 professionals have used our research since 2012.
Quotes From Members

We asked business professionals to review the solutions they use. Here are some excerpts of what they said:

Pros
"The most valuable feature of this solution is the support. They are excellent and you can learn a lot from the support team.""It allows me to configure High Availability and failover clustering with some fault tolerance, at a cost point that doesn’t break the bank for a small business budget.""A typical system administrator with minimal experience in Hyper-V, VMware, or Windows can do VSAN configuration and maintain VSAN operations.""When using new (warranty) servers, you can forget about the storage service for several years. The users will not even notice the failure of two servers out of three.""We have experienced multiple hardware failures at one site and the fault-tolerant volume worked exactly as expected with zero downtime.""StarWind vSAN is a great solution to create a redundant two-node-only Hyper-V cluster, both for domain or workgroup scenarios.""It has given the company an almost zero possibility of downtime.""It has a nice, simple control panel. You can clearly see the state and health of storage along with the synchronization."

More StarWind Virtual SAN Pros »

"I would rate the user-friendliness an eight out of ten.""The interface is very user-friendly.""Sangfor has many solutions, and you can easily manage their machine servers with just one management. They're always striving for greatness, and they continuously update their products. For example, they have now built endpoint security within the firewall. They are continuously improving not only the security but also all other products.""The Continuous Data Protection (CDP) feature is one of the good features.""It is flexible like a hyper-convergence system. You can add nodes, and you can scale to have better performance and stability. I also like the backup feature, the recovery system, and the web interface GUI to handle everything."

More Sangfor HCI Pros »

"VxRail's feature that we found most valuable was its really good performance. That was one of VxRail's advantages.""The stability is very good. We haven't had any issues at all. There aren't bugs or glitches. There aren't system crashes or anything of that nature.""The update process is very convenient.""The solution is perfect for the lifecycle management of hardware.""The recent technologies and management features that have been implemented.""This is a good solution for medium-sized installations especially when it will be coupled with VMware.""The cover points feature in VxRail is remarkable. It's unique. It has an intervention failover system as well as an automatic failover system, reaching clusters existing in VxRail. This makes all files act as a single file with a large and huge resource, and, of course, with customized administration, configuration, and resources. It provides automatic failover for redundancy and data recovery.""VxRail is very cost-effective and affordable in the long term. It is more recommended when it comes to financial life, but it may depend upon the license. VxRail comes with VMware licensing, which may not be that cost-effective as compared to others. With VMware, it's an auto check competition. VMware is an expensive solution, especially for Nutanix. Nutanix have their own hypervisor called Acronis, which is very cost-effective against the VMware. Nutanix is cheaper for the hardware but not for the software. If you ask the Nutanix partners to deploy Nutanix over Cisco servers or Dell EMC servers, the cost will be higher. Nutanix wants to compete financially. Therefore, they propose their software over the Supermicro server, which is a very cheap Chinese server. In fact, I don't like their terms of service. HyperFlex has the highest price, and it is very expensive. I don't know why. It may be because this is a UCS system, which comes from Cisco and is already expensive. When it comes to HyperFlex, they need the labor to deploy Hyper-V, Citrix, or any other hypervisor."

More VxRail Pros »

Cons
"I wish there was online support because email return takes a long time and a faster solution should be found.""I would like to see some additional, and possibly clearer, implementation videos with some slower and possibly more detailed descriptions of what the various steps of implementation are for someone who is unfamiliar with high availability and failover clustering in Windows.""This solution should be more self-sufficient, running without creating domains or failover clusters.""For the StarWind VSA vSphere solution, I would like to see a simpler and automated virtual machine installation process in terms of network settings.""If there was one feature I would like to see it would be a built-in subsystem for managing UPS backups shutdown procedures providing a way to initiate VM shutdown on all host servers, shut down the host servers, then put the fault-tolerant mirroring in standby, and finally shut down the StarWind SANs.""Being able to run StarWind vSAN on top of any free UNIX operating system to build a resilient iSCSI/FTP/SMB storage system would be useful.""New versions of this solution should be tested more thoroughly before the release as we had a few problems with one version due to a bug.""In the next release, they could make some graphs of the real-time loading, speed of storage, and interfaces. Of course, these can be viewed in other places. But, in the event of a malfunction or troubleshooting, this would be convenient."

More StarWind Virtual SAN Cons »

"Sangfor does not support a SAS configuration, which is something that we would like.""The error reporting needs to be improved.""It can have more compatibility and new features. I would also like to see better performance. Some of the other HCI solutions already provide the SSD and flash storage and much higher Intel processors. Sangfor HCI can improve on that.""Its virtual machine tools can be improved. These tools should be enhanced for use in other applications and operating systems, such as Linux.""As far as I know, no hyper-convergence solution includes security, so you have to buy security from another brand. For example, you buy SimpliVity or Nutanix. They don't really have a security solution inside the product. It would be good if there is a security solution inside this solution so that it is not only for the virtualization of CPU, RAM, disk, and network but also for security."

More Sangfor HCI Cons »

"It's not really flexible with different use cases.""It should not be deployed on one hypervisor. There should be multiple hypervisors supported like Hyper-V or KVM.""The price should come down a little bit. It has become better than it was at the beginning. There was a really big price difference between a hyper-converged infrastructure and the classic servers and storage. The gap is lessening, however, it's still there.""The licensing costs are too expensive. They should work on their pricing model.""Pricing could be improved.""There is a limitation on the number of nodes.""Troubleshooting can be a little more difficult than legacy systems.""If they can provide deduplication compression through the traditional hard drives, as Cisco does in the HyperFlex system, it will be very cost-effective, especially when it comes to archiving workload. VxRail doesn't allow the mixing of old flash clusters and hyper clusters. When I'm starting with an old flash cluster and it comes to archiving workload, I will also need to attend the new cluster. So, I either manage two different clusters, or I pay and upload my work with the archiving mobile hard drive, which is not cost-effective at all. The main key is to allow mixing between two types of clustering, like Nutanix, or allow deduplication of completion over the period of shared hard drive on SAV. It will be much better."

More VxRail Cons »

Pricing and Cost Advice
"There are two tiers of support and in my opinion, support is worth the cost.""Licensing is easy and the whole package is cost-effective.""The cost takes into account the number of nodes, so the size of the storage is not important.""The cost, including OPEX, is lower compared to other solutions.""This is the best priced solution for an SMB.""The premium support from StarWinds is a must have. The ability to have access to a storage engineer 24/7 is a must for a production environment.""The cost seems a bit steep, and I wish it was less expensive.""I think the bang for the buck is much better with StarWind Virtual SAN."

More StarWind Virtual SAN Pricing and Cost Advice »

"The price of Sangfor is cheaper than other competing products.""The pricing of Sangfor is very competitive.""It is in the middle range as compared to other hyper-converged infrastructure solutions. There is a three-year warranty on the hardware. The license also includes other features. Sangfor has included Continuous Data Protection (CDP) and a built-in firewall with the license. Other top brands, such as VxRail and VMware, require a separate license for such features.""Its price should be better, but I don't think they will change the price list. You have to pay for licenses, and you have to pay for support, so you have an annual fee. You can use the product without the fee, but it's really dumb because you need support. We are an IT company. We provide the product, and we need the support too for our customers."

More Sangfor HCI Pricing and Cost Advice »

"A typical node that I would sell to a customer has a list price be between $80,000 and $100,000 per node. Organizations typically start with four nodes. That's the hardware, software, VMware licensing, everything. Customers typically pay about half of that - approximately $45,000 to $50,000 a node. On average, it costs about $200,000 to get your foot in the door.""It is just as cheap to move over to an HCI solution as it is to maintain a legacy system.""VxRail is very cost-effective and affordable in the long term. It is more recommended when it comes to financial life, but it may depend upon the license. VxRail comes with VMware licensing, which may not be that cost-effective as compared to others. With VMware, it's an auto check competition. VMware is an expensive solution, especially for Nutanix. Nutanix have their own hypervisor called Acronis, which is very cost-effective against the VMware. Nutanix is cheaper for the hardware but not for the software. If you ask the Nutanix partners to deploy Nutanix over Cisco servers or Dell EMC servers, the cost will be higher. Nutanix wants to compete financially. Therefore, they propose their software over the Supermicro server, which is a very cheap Chinese server. In fact, I don't like their terms of service. HyperFlex has the highest price, and it is very expensive. I don't know why. It may be because this is a UCS system, which comes from Cisco and is already expensive. When it comes to HyperFlex, they need the labor to deploy Hyper-V, Citrix, or any other hypervisor.""It's a mandatory cost with everything included""I live in Brazil, and my customers are from Brazil. It is quite an expensive solution. It is more expensive than the traditional environment.""The price would be in the middle to the expensive range. It is not cheap.""At about $200,000, this solution is a little bit pricey but it is more economical than others such as Nutanix or Cisco Hyperflex.""VxRail is not cheap, but it's not expensive either."

More VxRail Pricing and Cost Advice »

report
Use our free recommendation engine to learn which Hyper-Converged (HCI) solutions are best for your needs.
542,029 professionals have used our research since 2012.
Questions from the Community
Top Answer: The most valuable features are high availability and real-time replication between two servers.
Top Answer: The StarWind VSAN business model is very cost-effective.
Top Answer: The StarWind Management Console is available only for Microsoft Windows/Windows Server, and should also be available for… more »
Top Answer: The Continuous Data Protection (CDP) feature is one of the good features.
Top Answer: It is in the middle range as compared to other hyper-converged infrastructure solutions. There is a three-year warranty… more »
Top Answer: Its virtual machine tools can be improved. These tools should be enhanced for use in other applications and operating… more »
Top Answer: HPE Nimble Storage dHCI Vs. VxRail One of the best things about the HPE Nimble Storage dHCI is the three, two, one,… more »
Top Answer: While both run on the vSAN technology from VMware, vSAN needs to be deployed on vSAN ready nodes while VxRail is an… more »
Top Answer: Si el caso de uso permite suministrar toda la funcionalidad de un Datacenter, la mejor opción es SimpliVity, porque es… more »
Comparisons
Also Known As
VCE VxRail
Learn More
Overview

For SMB, ROBO, Cloud and Hosting providers, who look to cut down virtualization expenses, our solution is StarWind VSAN. It is software that eliminates any need in physical shared storage by basically “mirroring” internal hard disks and flash between hypervisor servers. There is less hardware to buy in general, consequently less money is spent on purchase and maintenance. The existing hardware is used with maximum efficiency, so there is no money wasted at all.

StarWind Virtual SAN targets those who already have servers, or are bound to a particular vendor list to buy from. In case there is a new virtualization infrastructure to be built from scratch, StarWind offers a much better way – StarWind HyperConverged Appliance. It is a turnkey solution complete with hardware and software, powered by StarWind Virtual SAN. Those who need to build and maintain virtualization infrastructure at little to no expense, may be interested in StarWind Virtual SAN Free.

Sangfor HCI consolidates traditional hardware-appliance-based security, IP network, storage network, server and storage into one tier of commodity hardware (x86 server), forming a standardized HCI unit. By building IT infrastructure with a standardized HCI vendor and realizing visible, centralized operation & management via a unified WEB platform, users can enjoy an ultra-simplified, on-demand IT framework that is evolvable. Enquire today to find out more about cloud data storage and other solutions.

VxRail is the only fully integrated, preconfigured, and pre-tested VMware hyper-converged infrastructure appliance family on the market. Based on VMware’s vSphere and Virtual SAN, and EMC software, VxRail delivers an all-in-one IT infrastructure transformation by leveraging a known and proven building block for the Software Defined Data Center (SDDC).

With the power of a whole SAN in just two rack units, they provide a simple, cost effective hyper-converged solution for a wide variety of applications and workloads. VxRail Appliances deliver resiliency, QoS, and centralized management functionality enabling faster, better, and simpler management of consolidated workloads, virtual desktops, business-critical applications, and remote office infrastructure.

Offer
30-days for free

Try it today

Learn more about Sangfor HCI
Learn more about VxRail
Sample Customers
Baker Tilly BVI, CMS Internet, Board Harpeth Hall School
TOSHIBA TEC Singapore, J&T Express Indonesia, Crowne Plaza Vietnam, Hermina Hospital Indonesia
World Wide Technology Inc, Renault Sport Formula One Team, 8x8 Inc, Brownes, Canadian Pacific, Canopy, Denton, EDF, Unilin, Xerox
Top Industries
REVIEWERS
Manufacturing Company7%
Construction Company7%
Engineering Company7%
Non Profit7%
VISITORS READING REVIEWS
Computer Software Company25%
Comms Service Provider20%
Government8%
Manufacturing Company5%
VISITORS READING REVIEWS
Comms Service Provider38%
Computer Software Company25%
Financial Services Firm5%
Government4%
REVIEWERS
Financial Services Firm14%
Computer Software Company14%
Comms Service Provider11%
Healthcare Company8%
VISITORS READING REVIEWS
Computer Software Company31%
Comms Service Provider19%
Government8%
Manufacturing Company5%
Company Size
REVIEWERS
Small Business64%
Midsize Enterprise21%
Large Enterprise15%
VISITORS READING REVIEWS
Small Business51%
Midsize Enterprise25%
Large Enterprise25%
No Data Available
REVIEWERS
Small Business27%
Midsize Enterprise34%
Large Enterprise39%
VISITORS READING REVIEWS
Small Business20%
Midsize Enterprise18%
Large Enterprise63%
Find out what your peers are saying about Sangfor HCI vs. VxRail and other solutions. Updated: September 2021.
542,029 professionals have used our research since 2012.

Sangfor HCI is ranked 23rd in Hyper-Converged (HCI) with 5 reviews while VxRail is ranked 2nd in Hyper-Converged (HCI) with 47 reviews. Sangfor HCI is rated 6.6, while VxRail is rated 8.6. The top reviewer of Sangfor HCI writes "Stable, good pricing and licensing, and useful CDP feature". On the other hand, the top reviewer of VxRail writes "Good automation makes this solution practical". Sangfor HCI is most compared with VMware vSAN, Nutanix Acropolis AOS, HPE SimpliVity, Huawei FusionCube Hyper-Converged Infrastructure and Scale Computing HC3, whereas VxRail is most compared with VMware vSAN, Nutanix Acropolis AOS, HPE SimpliVity, Dell EMC PowerFlex and Veeam Backup & Replication. See our Sangfor HCI vs. VxRail report.

See our list of best Hyper-Converged (HCI) vendors.

We monitor all Hyper-Converged (HCI) reviews to prevent fraudulent reviews and keep review quality high. We do not post reviews by company employees or direct competitors. We validate each review for authenticity via cross-reference with LinkedIn, and personal follow-up with the reviewer when necessary.