The deployment of Darktrace was done by the vendor.

We used a third party for parts of the implementation of Darktrace.

We did the implementation with the help of a technician from Darktrace and a reseller. I'd rate their assistance a ten out of ten. They were great.

The engineer from Darktrace set it up about two years ago.

We did the deployment on our own, with Dartrace assisting us remotely. 

We implemented the solution with the help of Darktrace representatives.

The vendor set the solution up with us. 

Our deployment was done by Darktrace themselves, but they have some partners that also do it. Once you are up and running, you can deploy any additional appliances by yourself.

We used professional services for the implementation of Darktrace.

The implementation was completed by a vendor technician. The setup was simple and took a couple of hours.

We used the SI to help us with the implementation. 

The solution's deployment time depends on the complexity of the network. For some huge networks, you need to tap the right resources and measure the system to acquire all the required traffic. The deployment is very straightforward in smaller networks where you have to connect to only one switch.

We handled the initial setup ourselves. We did not need any outside assistance from integrators or consultants. 

We had a consultant that assisted us with the implementation. They made the process very easy.

We brought in their guy to the site. In terms of maintenance, it is automatically set up to reach out to their website and pull down updates and stuff. We don't have to worry about that too much.

The deployment process is pretty self-sufficient. It handles network closure and device discovery.

One person is sufficient for the deployment process. 

We implement this solution.

We are capable of handling implementations for our clients. 

We used a consultant. We have just two engineers who are doing the deployment and maintenance.

I have implemented it using Darktrace Team who were very professional.

My team handled the deployment. They did everything. After that, they give me a report, which I then go through.

We have one engineer that does the maintenance of Darktrace. They do the implementation and scanning of the network.

The solution does not require a lot of maintenance, it does most of the operations automatically.

We provide technical services.

We have a partner.

The deployment was done in-house.

We used a consultant to assist us with the implementation.

One person is enough for the deployment and maintenance.

Vendor Team

We are the ones who do the implementations and we have done many, so we are very good at it.

We were granted access to all of the documentation and information from Darktrace, so we did the implementation ourselves. There may have been one or two areas that we had to go back to Darktrace directly to get clarification on, but there was no third-party partner or reseller involved.

The deployment took us about a week and a half to implement. We did not use a third party to implement but it is available.

We implemented with a consultant. It required two people.

We are a system integrator. For its deployment, one cybersecurity specialist would be enough.

We used an integrator.