I have been using HPE 3PAR StoreServ for approximately 13 years.

I have used HPE storage for eight to 10 years.

I have been using the solution for many years.

I have been using PE 3PAR StoreServ for approximately four years.

I have been using the solution for the last ten years.

I have been using HPE 3PAR Flash Storage for approximately 10 years.

I have been using this solution for four years. 

I've been using the solution for about a year now. It hasn't been too long.

I have been using HPE 3PAR StoreServ for the past seven years.

I have been using HPE 3PAR StoreServ for approximately seven years.

I have been using this solution for three years.

I've been using with the solution for the last six years. 

I first got involved with 3PAR in 2006.

I've used the P10400 for three years, and I would rate it 7/10. Alongside this, I've been using the 7400 for one and half years, and say it's 8/10.

Also, we are not currently using 3PAR flash storage but are planning an implementation. We are currently looking into flash to speed up our MS SQL for the logs and TempDB LUN’s. We are also looking into it as a possible future deployment for an as yet not deployed VDI implementation.

We have been using our current HPE 3PAR for the past year and a half. For the previous six years, we had an older version of 3PAR storage.

I've been using the solution for several years. It's been probably around seven years or so. It has definitely been a while.

I have been using HPE 3PAR StoreServ for about four years.

I have been using this solution for 5 years.

I have been using HPE 3PAR StoreServ since 2021.

I have been using the solution for around three years.

I have been working with the solution for one year. 

I have been using this product since 2017 — about five years.

I have been using this solution for about three years.

I have been using this solution for four years.

We have had the solution for four years and the software has been updated.

We've been using it for three years. We currently have a 7400 (mix of disk drives), and a 7450 (full flash array, only SSD disks),

I've used it for two and a half years. We initially did an evaluation with the 7200 unit. Having tested and being pleased with the outcome, we purchased a 7400 with two nodes, and subsequently upgraded to four nodes. The 7200 was moved to be used for disaster recovery.

We have been using the solution since 2018.

I have been using HPE 3PAR StoreServ for three years.

We are using a 3PAR 8800.

I have been using HPE 3PAR StoreServ for approximately 10 years.

I have used the product for over two years.

We have been using 3PARs for a year.

I have been working with HPE 3PAR StoreServ for the past three years.

We have been using the HPE 3PAR StoreServ for the past five months.

We’ve had that unit for just under a year right now. I’m pretty sure I bought the first All-Flash starter kit in the US and it’s been a huge source of success for us. We’ve used it to stabilize our business intelligence infrastructure and extreme line some of the processes in our ERP.

We have been using this product for 1 year.

We're just getting into the 3PAR world. In fact, we're getting ready to stand it up. We just got it. It's not yet running, but I've used 3PAR in the past as well.

We have been using this solution for more than a year.

3PAR 10400 (Production) and 7400 (DR - location)

I've been working with the solution for many years now. It's been five or more at this point.

I have been using the tool for five years. 

We've been using the solution for a few years at this point. 

I've been using 3PAR for about six months. 

As a company, we have been selling HPE 3PAR StoreServ for more than 24 years. Personally, I've been dealing with it for more than 18 years.

We've been using 3PAR for about five or six years.

I have been using 3PAR for five years. 

We have been using 3PAR for more than a year now. We are using two 7200 devices. The first has 48 disks, and the second is equipped with eight flash SSD Disks and 56 SAS Disks. We are using the flash disks in combination with adaptive optimization technology to cache high I/O regions from disks to SSD. We have no dedicated flash storage, but the solution we are using is working great. Additionally, we own ab old HP EVA storage.

I've been using the solution for almost four years at this point. I've used it for a while. 

We've been with HPE for about ten years.

I've used it for three years.

I have used the 7200 for over two years and the 7400 for around six months.

6 months, it’s predecessor HP 3PAR T400 for 6 years.

We've been using this solution for about seven years. 

I have used this solution for over seven years at many different companies.

We have been using the HPE 3PAR StoreServ in our organization for about five years.

It's been about eight months.

I have been working with the solution for ten years.

Actually, we're new with users of the HPE 3PAR solution, this is our first 3PAR and we have just acquired it three months ago.

We have been using the product since the beginning of 2014.

We installed it 12 years ago, moved to NetApp, then back to HP because of the maintenance costs.

We have been using 3PAR for the last four years, and have a total of six arrays now.

I have been working with HPE 3PAR StoreServ for about ten years or since the beginning when the product was in the market.

I have been using the solution for four years.

We have been using HPE 3PAR StoreServ for almost five years.

A little over a year.

We introduced this solution into our system in early 2013. We were one of the first customers in Germany and Europe who really received the new 3PAR 7400 storage systems. We transferred all our data from our previous system which was the HP EVA system to the 3PAR system. We did that not by means of the online import, but rather the MPX solution. This solution transferred it over the wire, at wire speed transfer, block for block, the data from the EVA to the 3PAR. Over a weekend, we had all the data for virtualization which was the MRV sphere, the file services on top of Windows storage. We were able to transfer into the new system so we can break down the old system, erect the second new system then have everything merge across the sites again, like we had before.

I've used it for five years.

I have used HPE 3PAR StoreServ within the past 12 months.

I have been using HPE 3PAR StoreServ for approximately six years.

Approximately nine months, and still in the migration process, so a total assessment of the whole product and it's functionality is still not possible.

I used it for three years.

I used it for six months, but am now at a company that is not using it.

It entered into production in July 2012.

I have been using the solution for three and a half years.

Three and a half years, almost four years.

for the last 4 years

We have had the solution for approximately 5 years.

I've been working with 3PAR for about four years now.

I've used it for two years.

We have been using the product for about two years.

I've used the Inserv 7000 series for two years.

Around 2 years

I have been using HPE 3PAR StoreServ for more than seven years.

We have been using this solution for over five years.

We have it now for more than one year.

We've used it in production for one and a half years.

I've been using it for three years.

We've had it for three years.

I have been working with HPE 3PAR StoreServ for 7 years.

I have been using HPE 3PAR StoreServ for a few months. The company has been using the solution for approximately five years. The version we are using is at its end of life, it is a traditional server setup in our environment.

I have been using 3PAR for three months. 

We've been using the solution for three months at this point.

I have used this product for the past 2-3 years at various clients including various models of the 3PAR.

I've been using this solution for seven years. 

I have been using this solution for more than five years.

More than five years.

We went with it quite recently.

We've used it for three years.

I've used it for three years.

I've used it for three years.

I have used this solution for more than three years.

I used it for one and a half years, before I moved companies.

I've used it for two years.

I've used it for four years.

I have been using HPE 3PAR StoreServ for more than four years.

I have been working with this solution for three years. 

Three months.