I use the solution in my company for ToR switching in the data center.

The HPE ProCurve, we've used mostly with businesses, either enterprise networks and/or some manufacturing. We've worked and used the solution in a core setup and edge switches.

We use the product to connect our headquarters with 32 branches in the country.

We primarily use the solution for LAN connections. 

We use the solution for networking access. We need to connect, for example, every user in the building to the network. Generally, the users are not using more cables. They are just using Wi-Fi. We connect the users via Wi-Fi to the network of the company, and we also have this network access control which is one appliance that can verify the current situation of the endpoints. For example, if the device has the correct credentials to access the networking, if the device, for example, has the latest Windows updates, the latest antivirus updates, you can create your own routes to let the device in and access the network, or deny it, or put it in quarantine. You'll be able to access some remediation networks.

HPE ProCurve is primarily used for access suites. I have my end devices connected to my access point, including printers and IP phones. It is also used for distribution. 

My customers are using HPE ProCurve for their network layer two and three connectivity. Each of their buildings has approximately 55 switches, including the core switches in operation.

HPE ProCurve is used mostly in business networks.

We use the product for VLAN configuration.

HPE ProCurve is used for enterprise.

Our entire network is controlled by HPE ProCurve. Essentially, we have an MPLS as part of our MPLS network. There are numerous use cases I can describe, but there is nothing I can say in detail right now.

We have a huge network with a lot of servers. Our operation is small but we need the network infrastructure.

It's the switch for the network.

The primary use case of this solution is for switching. We also use it for an iSCSI device to support storage and networking.

We are in the healthcare industry. Most of our switches are modular because we need a lot of ports in one location.

The solution is primarily used as more access for users and as more access for layer switches.

We primarily use the solution for switching only on the LAN. That's it.

We primarily use the solution to deliver the network to the users. We typically use the bigger switches. The switches we are using are used to foster the backbone routing and route out the firewall and the servers.

We use HPE ProCurve for access switching.

We use HPE ProCurve in our institute for networking.

HPE ProCurve is a switch used in a network.

We use this switch as part of our network infrastructure and we also implement it for our clients.

The primary use case of this solution is as a switch and we are working on link aggregation switches at the moment.

We primarily use the solution as a client switch, which supports the users, as a core switch of the whole network, and also as a service switch for only the servers and the environment.

We primarily use the solution to connect our network.

The solution is a network switch, this is what it is used for by my customers.

Normally, I use it for the core environment and the solution switches. I have these two environments, the core, and the switches. Sometimes they have other or alternative environments. It's a solution environment for the back office. That's how I use it.

We were in the hospital IT sector.

We are a system integrator and we periodically sell web fabric to our customers. This is one of the solutions that we provide.

This solution is normally implemented with rack mount servers and other equipment such as HPE StoreOnce.