LogicMonitor Room for Improvement

Subbarao Punnamaraju
IT Operations Manager at a university with 10,001+ employees
There are a few things that could have been done better with the reporting. It could have a more graphical interface. The dashboards can be improved. They are good, but there is a pain point. To show things to management, to explain pain points to other customers, to show them exactly where we can do better, the dashboarding could be better. Dashboards need to show the key things. Nobody is going to go into the ample details of Excel sheets or HTML. Automation can also be improved. Finally, while this is a very good tool for monitoring and responding, if there was a way they could do something like PagerDuty or another third-party solution for alerting, integrate both monitoring and alerting, that would be an ideal scenario. View full review »
David Dietz
System Engineer at IFM Efector, Inc.
With the email alerts that we get, it would be nice if the subject line were a little bit smaller, and if it showed the system that is out as the first thing. Sometimes you have to open the email to see what that is. View full review »
Jason Fant
Solutions Engineer at Black Box Network Services
One thing I would like to see is parent/child relationships and the ability to build a "suppression parent/child." For example, If I know that a top gateway is offline and I can't talk to it anymore, and anything that's connected below it or to it is also going to be offline, there is no need to alarm on those. In that situation it should create one ticket or one alarm for the parent. I know they're working towards that with their mapping technology, but it's not quite to that level where you can build out alarm logic or a correlation logic like that. I would also like them to expand more on their resources view, which is their tree structure of all the devices and what's being monitored. I'd like to see some logical type of grouping of services. If I know I've got this web application which is using this SQL database and this service from this web server, it would be helpful if I could create a special view for those kinds of services and instances. View full review »
Learn what your peers think about LogicMonitor. Get advice and tips from experienced pros sharing their opinions. Updated: January 2021.
455,301 professionals have used our research since 2012.
David Azzopardi
IT Operations Manager at CAE Technology Services Limited
The topology mapping is all based on the dynamic discovery of devices that could talk to each other. There is no real manual way that you can set up a join between two devices to say, "This is how this network is actually set up." For example, if you have a device, and you're only pinging that device for availability and not getting any real intelligent information from it, then it can't show you which devices are actually connected to it. Before the topology mapping was released, I was working with product management and did raise this issue at the time. I haven't seen it yet, but it was something that I suggested to them that they should allow customers to be able to build their own topologies, or at least to override what's being discovered, just for visualization more than anything. I can completely understand that the old topology mapping is how the root cause analysis and the alert suppression work, which is all dependent on that as well. So I wouldn't want to override that in terms of functionality. But, in terms of a visualization on a map, it would be a big plus to be able to do that. I have been told that this is being worked on in the background. View full review »
Daniel Gavin
Network Architect at Envision IT
We have found LogicMonitor's reporting capabilities to be somewhat lacking. That is one of the only areas that we really thought was not as strong as it could be. One of the great things is the dashboard functionality, which we were able use to work around the reporting functionality. Instead of having a canned report that gets emailed to our customers, they have a live dashboard that they can log into and view the things we would normally include in a report. They can have a live look, where they can really drill into the data and see what is there. LogicMonitor's reporting capabilities definitely could use an improvement. We have made do with the dashboarding and done what we can to make that work for our customers. However, there are definitely customers who would like a PDF or some kind of report along those lines, where we have been utilizing other tools to provide them. The out-of-the-box LogicMonitor reporting is the only thing that we have been less than impressed with. View full review »
reviewer1369572
Systems Engineer at a tech vendor with 201-500 employees
It needs better access for customizing and adding monitoring from the repository. That would be helpful. It seems like you have to search through the forums to figure out what specific pieces you need to get in for specific monitoring, if it's a nonstandard piece of equipment or process. You have to hunt and find certain elements to get them in place. If they could make it a bit easier rather having to find the right six-digit code to put in so it implements, that would be helpful. View full review »
Idan Lerer
Senior Director, US Operations at Optimal+ Ltd.
There is room for improvement with the UI. The UI is not that innovative. Although in general I like the UI, because it's very easy to use and very easy to customize, when you look at LogicMonitor for the first time, you don't think that it is a very cool tool. I do think this is a very cool tool, but the UI looks like an old UI. I would like to see more SQL monitoring and database monitoring. Although it has some basic functionality there, I would like to see more advanced database monitoring. I would like to be able to drill down into the SQL execution plan or the storage processor or query performance. In SolarWinds there is a model for SQL database monitoring. LogicMonitor has some, but not at an advanced level. View full review »
William Guertin
Senior Systems Engineer at Accruent
I have struggled a bit with the SLA calculations though, because I have some issues with the reporting having no data. However, I have worked around those issues and we have a solid process for reporting the SLA. Automated remediation of issues has room for improvement. I don't know how best to handle it, but I know that they're kind of working on it. I know there are some resources that can do automated remediation. I would like them to improve this area so it could be completely hands-free, where it detects an issue, such as, if a CPU is running high. There are ways to do it even now, but it's a bit more involved. Also, for a LogicMonitor program, it really depends upon the hardware and environment that it is running on to make that call. In terms of when it alerts, there are times when we do get alert storms because one device kind of fails on an interface where there are a number of things. Even if only one out of the five things on the interface fails, then everything on the interface will alert. I would like it to able to create network maps and connectivity structures so you don't have to manually do it. This piece hasn't been a big hitch for us, but I imagine there are other customers who would really like to see the mapping piece of it grow and become a little bit more automated. View full review »
AdamGleeson
Pre-Sales Technical Consultant at a tech services company with 11-50 employees
One of the areas that I sometimes find confusing is the way that the data is presented. For example, a couple of weeks back I was looking at bandwidth utilization. That's quite a difficult thing to present, but they should try to dumb down how the data is presented and simplify what they're presenting. With some data types, it's not really possible to do that. But that's one of the good things about LogicMonitor: You've got all of the data there. The sheer wealth of data that it gathers means that you can take that data and manipulate it in other ways, if you want to. View full review »
Leo Milanovic
Network Operations Center (NOC) Manager at a tech services company
The reporting capabilities are okay but they are not perfect. There are some drawbacks in terms of differences between the information that can be found in the portal when compared to the reports themselves. We can see some of the information on the portal by clicking and navigating the menus, but if we want that same information within the reports it can be tricky, depending on the specific information we're talking about. In general they are okay, but the biggest disappointment is that reports haven't been developed in the last couple of years at all. That's something we hope will change in the future. I would also like to see a dark theme in the portal. I'm aware that it has been requested many times before, but that's something my team and I have been wishing for for quite some time. We would like a dark theme instead of having the white background and the very light user interface. View full review »
Reviewer957623
Head of IT at a tech services company with 51-200 employees
The user interface is being addressed at the moment. It is about to be refreshed within the product. Certainly, there is room for improvement in that area, and I think that's recognized and being dealt with. Some of the dashboard capabilities are being extended. There are a few bits and pieces that they could do to make them even more flexible than what they are. View full review »
Randy Newman
Lead Network Engineer / Solutions Specialist at a tech services company with 11-50 employees
The biggest area of improvement is with mobile. I'd love to see them improve the mobile app side. That's something I've mentioned to them on multiple occasions. It's one thing to be sitting in front of my computer when a problem or an alert comes up. It's a completely different thing when I'm remote from my computer and it would be nice to be able to have the same dynamic capabilities in an app as it would from the desktop. But otherwise, at the moment, what there is, is very sufficient for our purposes. My biggest thing would be to focus on the app side of things. View full review »
Paul Dinapoli
Sr. Systems Engineer, Infrastructure at NWEA
The ease of use with data source tuning could be improved. That can get hairy quickly. When I reach out for help, it's usually around a data source or event source configuration. That can get challenging. View full review »
reviewer1367208
Principal IT Consultant at a tech services company with 51-200 employees
The process of upgrading some of the collectors has been a little bit confusing. I need to understand that better. View full review »
reviewer1357986
Senior Systems Integration Engineer at a tech services company with 501-1,000 employees
Reporting is definitely a weak area in LogicMonitor. There's just not as much flexibility as there is in other areas of the product. Some of this can be overcome by using the REST API, but more of it should be out-of-the-box. Also — I know that they're working on this — a situation can arise when you have a logic module and you change the devices to which it applies. Now the version in their repository is different from the one that you've downloaded, even though it's essentially the same. You made a very minor change. So when you look for new data sources or logic modules, that one will show up as being different. And you have to go in and say, "Oh wait, no, it's not really different. It's just that I changed the 'Applies To'". Or say you've made a change to a threshold on a data source. It may be that LogicMonitor updates the data-gathering method for that. There's no good way to import the update without overriding the changes that you've made. That can be difficult. View full review »
Tom Shepherd
Technical Architect at Computerworld Group
The reporting is okay. We don't use it that heavily. It is probably one of the less developed parts of the platform. We don't use it very much, but it could do with some improvements. They have been toying around with new graphical designs recently. Most people are probably happy with the way it looks at the moment (the original design is quite nice), whereas the new graphic design stuff has been a bit bright and colorful. It monitors most devices out-of-the-box, but not all. There is still improvement to be had in the devices that it monitors. It doesn't monitor some storage devices that we use, which is quite frustrating. It wasn't able to monitor Dell EMC Compellent Storage. In terms of what it can monitor though, the list would be enormous. E.g., it has very good VMware support. View full review »
Douglas Hoover
IT Systems Engineer at a manufacturing company with 1,001-5,000 employees
Some more application performance type monitoring would be nice. For example, an APM type solution, which would not necessarily completely replace it, but be able to tie into to what we're seeing on the application performance side so we can correlate what's going on with the application versus the underlying infrastructure. View full review »
NimerBsoul
DevOps at a tech vendor with 201-500 employees
The graphs are not intuitive and I think that they can be improved to help find issues faster. As it is now, I need to dig in more and try to filter things. Graphs are meant to be read easily, but in this case, they're not. There are different styles for CPUs, such as spiking with lines, and personally, I don't like that. I like more dots because with the display now, you never know what the limit is. When it is past the limit, that is where you need to check. Really, I'm not sure if any monitoring tools do that. View full review »
reviewer1010436
Service & Concept Developer at Retune AB
Easier to get more data out from the API. a simpler search function in the portal (may come in 115 release) More datasources for Azure regarding backup and site-recovery View full review »
MattyM121
Technical Consultant at a reseller with 51-200 employees
Bring back right-clicking in the UI, as I didn't notice I missed it until you removed the option to, which now just gets frustrating. View full review »
Patrik Nordlund
User at Retune AB
More customization and settings-tweaking so that we can make even more specialized data-sources/monitoring setups. View full review »
reviewer1017426
User
* I would like to be better able to monitor Oracle processes. A web-based interface is easy to use, but it is cumbersome to make changes across several devices. View full review »
Learn what your peers think about LogicMonitor. Get advice and tips from experienced pros sharing their opinions. Updated: January 2021.
455,301 professionals have used our research since 2012.