NETGEAR Switches Pricing

JD
Systems Consultant at DBI Systems

It was an initial, single purchase for us. For the three switches, because I had the 96X and the two 48 port single gigabyte ones, then all the cards, etc. The total price on it, which may be a little on the low side, for the client was around $16,000 or $17,000. 

In terms of the NETGEAR stuff, there weren't any surprises. The costs were definitely fair, especially considering what we were replacing. For the equivalent performance from a non-AV over IP solution, it would have been easily been in the $40,000 range. Comparing it to standard AV video switching, the price was very good, especially considering now they can add-on without any massive additional costs.

When I started looking around at other competing options, the price to performance for the NETGEAR M4300 was above everything else. For what we needed, especially with the 96X where we can add in additional cards later, this saved our clients easily thousands of dollars on this install. We only needed eight or twelve quarts of copper, but they do eventually want to add some more in the future. So, instead of having to buy a 10Gb switch with copper and PoE with 48 ports, which would've been an amazingly expensive devise, I could buy the 96X and put in the two cards and load the fiber that I needed. I could do fiber and copper in the same switch, which is just brilliant.

View full review »
JC
Owner at Alpha Tech

For the price, they're good. If you look at Ubiquity switches (which have cloud features too) or even the regular NETGEAR GS switches, these are still price-competitive and come with the cloud features, which is just amazing.

I sold someone a SonicWall and they had to redo their subscription every year. It was a $300 or $400 subscription they had to pay every year and I got a small piece of that. With NETGEAR I am getting less from the subscription, because now it's only a $10 or $20 subscription per device for the whole year, instead of $300. But it's easier to sell the product because my clients aren't complaining that they're paying for super-expensive support and licensing for a year. To pay $200 per SonicWall access point, that's kind of crazy; or Cisco Meraki where you're paying $300 for the year. Now, you can pay $10 or $20 and you have your license and all your support.

The cost of the hardware and additional services is really low. It's competing with Ubiquity. We're probably getting a little more margin because the price is so low, so we can squeak in a little bit more margin for ourselves. The important thing, though, is that we're able to supply a better solution to the client. Now, instead of the client spending $800 to get one WiFi access point, we can do three access points for $800 and they're just as strong, signal-wise, as the $800 ones. That means we have a better-deployed mesh network. Instead of just one access point placed as best we could, we have a stronger mesh. We can design a better network because it's more affordable for small businesses, and that includes the Ethernet switches and the access points.

View full review »
JC
Information Technology Manager at KING & KING ARCHITECTS, LLP

Technology keeps changing so you don't need to buy something that's going to last 100 years. Buy something that you know you're going to have to replace in five or 10 years and price it accordingly. We were told that the Nortel switches we had bought would last for 10 to 20 years and that we would never have to replace it. Networking got faster in the years between and frankly, those switches got filled with gunk, they physically start wearing out, and fans die. As long as you know that it has a five to 10-year window, why would you pay 20 grand a piece for a switch? I just don't understand that.

There are no additional costs. We pay for licensing, hardware, and cables. That is it.

The pricing was definitely reasonable, I don't know if I'd say low. I think all networking equipment is more expensive than it should be. But NETGEAR had the price point that least annoyed me.

View full review »
Buyer's Guide
NETGEAR Switches
March 2024
Learn what your peers think about NETGEAR Switches. Get advice and tips from experienced pros sharing their opinions. Updated: March 2024.
765,386 professionals have used our research since 2012.
SW
UC Deployment Engineer at a tech services company with 501-1,000 employees

I would give the solution an eight point five (out of 10) for price to performance. The performance is really good. It fills in a hole that other vendors have had for a while. What you can do with this switch for the price, it is hard to match using another vendor.

From a price perspective, the solution comes in higher than a small business product from their competitors. The solution is a bit higher, but it's a fraction of the cost compared to an enterprise switch. For example, a Cisco Catalyst can run approximately $13,000, where their Small Business Series may run $800 on the Cisco side. With NETGEAR, it falls in around the $1,000 to $2,000 range for most of what we use it for. Essentially, at this price point, you're getting a lot of enterprise grade features (e.g., that you would on a Catalyst) on an M4300.

Comparing the NETGEAR switches to their competitors in the enterprise space, they are on the cost-effective side. A lot of the features that they have are enterprise-centric, depending on the switch you go for. Most switches are between $1,000 to $3,000. Some of the larger switches get bigger or more costly. These are not small business class costs, but they're in that lower mid-range cost-wise. However, the features that you get are hard to match for the price.

View full review »
ES
Chief Technology Officer at a tech services company with 201-500 employees

The pricing is great. The cost of the hardware is low. I think it would be bad for NETGEAR to start going down the road of a licensing model. We want a one-time, upfront cost.

They're not the lowest cost. There are a few solutions that have a lower cost, but NETGEAR is very value-oriented. If you're not considering NETGEAR switches, you're throwing money out the window right now. There's nothing on the market like it.

View full review »
DS
Owner at a tech services company

The price to performance of this solution is very good. When it comes to pricing, as far as I'm concerned, they're very comparable with Ubiquity. NETGEAR has pricing that is as good as it gets. That's why I use them.

Regarding licensing, there is none. You register them and they're good to go.

View full review »
HM
CEO at a tech vendor with 11-50 employees

Insight pricing is okay. It's very competitive.

The costs of the hardware and additional services weren't low because Unify is much cheaper, but the costs conformed to the market. When you look at the hardware specs, the price and the warranty, the complete package was much better than any other vendor. If you consider those three main aspects of NETGEAR Insight and NETGEAR Insight devices, and you put them next to Ubiquity or Cisco Meraki, or even TP-Link, in our opinion, it's better hardware, it has a better warranty, and for the price you have to pay, it's a pretty good product.

View full review »
PM
Owner at Komansu Electronics Pvt Ltd

The product is priced economically.

View full review »
KW
Network Delivery Architect at a tech services company with 501-1,000 employees

At its price point, nobody else can compare to what NETGEAR is doing at that 10 Gigabit bandwidth level. We are not seeing a lot of 10 Gigabit need right now in the marketplace. Though, we have done a few projects which have required it. We are still sort of at the 1 Gigabit requirement for the majority of our projects. Honestly, NETGEAR's 10 Gigabit offering has a better value than some of the other vendors' 1 Gigabit offering.

Compared to other large names in the marketplace, the price of NETGEAR's product is extremely cost-effective compared to what Cisco or Extreme offer.

NETGEAR as a product versus an AV matrix switcher is far cheaper in its design, but it is sort of an apples to oranges comparison.

View full review »
EG
Owner/CTO at a tech services company

The pricing for what you get with the Insight product line is very fair and the value is there, including the annual licensing fees for the Insight Pro for each device. The pricing is very fair for the features that you get. In fact, I believe that the Insight Pro level, which is their highest level, where you get a lot of features with the Insight, is a bargain. You get a lot of good features for what you're paying there annually.

I feel that the pricing for the devices and licensing is low and, obviously, it helps the business because I was able to upgrade to the Insight product line and get better, newer, more modern equipment at a very reasonable price. I was able to take some money that was saved from a budgeting perspective and spend it elsewhere within the organization to improve other aspects of the business.

View full review »
CS
System Engineer at Diversified

The price to performance of the switches is excellent. The price point of these switches is great compared to big brands, like Cisco or Extreme Networks, with approximately the same functionality. 

Licensing is always a hassle and a pain point.

We find the cost of NETGEAR hardware and additional services to be below average compared to the top tier. There are still cheaper products out there, but they lack in functionality.

View full review »
KS
VP, Accounting and HR at Parrish Consulting

NETGEAR pricing is the best on the market by far. I was shocked when I saw what their price came out as for their subscription. It's extremely reasonable.

The great thing about the Insight product is that the renewable subscription is much cheaper than the competitors in the market. It is not over $50, per year, so customers buy the equipment and don't have to worry so much about the renewable fees that go along with having such access into their switch, with a cloud-managed solution. There are some other manufacturers where you'll essentially pay the same in hardware as you do in software, just for the cloud solution that supports it; just to keep getting the firmware updates and all of that information.

With NETGEAR, you can do multi-year and that is something like 90 percent cheaper than if you're looking at Meraki, for example. It is extremely competitive. It's one of the main reasons we liked it so much. It's one of the reasons we push this so much. We want this information in the cloud and we want this insight, but we didn't want to commit our customers to such a hefty subscription fee.

View full review »
CP
Owner at GICPM Technology

The price is very fair for this type of device, especially for what it does.

View full review »
BH
Chief Technology Officer at Genesis Technologies

The pricing is very good for 10GbE switches and you get a lot of throughput. It is about 60 percent of the costs of other switches from competitive manufacturers, which is really good.

View full review »
Kalyan  Chowdhury - PeerSpot reviewer
Founder at Computech infosysetm

It's cheaper than Cisco. For the features it offers, the pricing is good. 

For example, if we need a specific feature like VIN, we can access to an appropriate suite like L2 or L3. Similarly, if we only need basic network functionality, a simpler and more affordable option like a normal suite would be ideal.

View full review »
Piyush Jain - PeerSpot reviewer
Product manager at Oracle

There are no licensing costs. It only involves the costs of the devices.

View full review »
Jitender_Kumar - PeerSpot reviewer
Head of IT at Somani

NETGEAR is competitive and cost-effective in comparison to Aruba and other solutions. It's not the most expensive, but it's not cheap. You're getting what you pay for. 

View full review »
WW
Developer with 11-50 employees

The price-to-performance of this solution, on a scale from one to ten, is about nine. 

The pricing is quite good. We don't have any kind of licensing on the device, as far as I know. There's one product which you can purchase a license for, it's NETGEAR Insight, to manage the switches remotely on the Internet, but we don't need it. I just manage them locally.

It helped us save some money, of course. The total cost of the deployment was about 11,000 euros or so. If I had gone with HPE it would have been at least twice as much. I think Cisco might have even been more expensive.

View full review »
it_user976371 - PeerSpot reviewer
Operations Manager at DLL Technologies

When it comes to price-to-performance of the solution, overall, it's outstanding. That's one of the reasons I designed the network this way and chose this particular device. The overall cost was not that expensive compared to some of the competitors out there. Add to that the usability and functionality. And being able to troubleshoot the switch if there is a problem is so much easier because it's a modular switch. There are not too many modular switches out there.

The pricing is phenomenal. It's not only good for the company providing the solution, but the customer gets a good deal too. There's a good profit margin for the business to be able to resell it to a client or to offer a good price to the client. It's a win-win for both the company providing this particular equipment to the customer and for the customer.

The cost of hardware and additional services is low. We have three-year support that's built-in with NETGEAR, which is great. That might be standard in the industry, but as far as their help goes, they've been wonderful.

Right now, on the little switches, we're only using the switch. We're not really utilizing Insight because of the cost.

View full review »
Lixin Zhang - PeerSpot reviewer
Product group manager at GALYET TECH

The M4250 series of switches is not expensive and is even cheaper than Huawei. A license is not required.

View full review »
AT
Project Engineer at a tech services company with 1,001-5,000 employees

Licensing cost depends on the model and number of ports, whether it’s POE, POE Plus or POE Plus Plus. There are certain Cisco switches that are about the same price. 

AVB licensing is required to purchase separately on NETGEAR and Extreme Network.

View full review »
Angel Georev - PeerSpot reviewer
Product Manager at a computer software company with 1,001-5,000 employees

The product is more expensive than, for example, TP-Link; however, it is cheaper than Aruba, Cisco, or Huawei. All of these are more enterprise-level switches, which is why the cost is a bit more. NETGEAR is better for smaller businesses. That said, while it is not a cheap brand, it offers good value. 

View full review »
JP
Founder/Managing Director at Microtel Netlinks Pvt. Ltd.

The cost is based on a per unit model. I believe it works out to be the Rupee equivalent of around $350 per unit. It's comparable to what Cisco or Ubiquiti charge. 

View full review »
PS
Director Of Operations at a retailer with 51-200 employees

It is a slightly expensive product.

My company needs to purchase no licenses to use the product.

View full review »
WS
Owner at CableWeb

You get what you pay for. From a price comparison, there are cheaper switch makers on the market that are definitely less expensive than NETGEAR. They give you the same functionality, but they don't come with a name. 

There are solutions like Ubiquiti that are very good. They have the ease of setup, and I find NETGEAR battling a little bit in comparison to Ubiquiti.

Cisco is obviously very expensive, and for a lot of people, it is usually for their core network.

View full review »
JM
President at a tech services company with 51-200 employees

NETGEAR is not competitive when it comes to cloud management because Ubiquity is free. Peplink is free but you have to keep the device under warranty. After its initial warranty is up, you have to buy the extended warranty to keep it under cloud management. In that situation, the $10 a year on a router would be cheaper than keeping the device under warranty. But when you get into the access points in Ubiquity, they've got NETGEAR beat because it's free for that service. It's part of buying the product.

NETGEAR's new product is definitely more expensive than their standard product line. It's a new product line for them, so I'm hoping with the maturity of the product that those costs will come down. The standard product line is considerably cheaper. I'm not quite sure why, because there's not that much on the tech side. It really doesn't cost any more to build a managed device than it does to build a non-managed. That's usually all just in software implementations. Cloud-managed is going to be the mainstay. Everybody's going to go there. It's a matter of time until that's just the standard and everybody will expect everything to work in that environment.

View full review »
Parmanand  Pandey - PeerSpot reviewer
Sr Tech Lead at Cygnus

The pricing is reasonable for small business owners. it's not overly expensive. 

View full review »
MA
Solutions Architect of Digital Media at a tech services company with 201-500 employees

The price-to-performance of the solution is very good. You get very high performance for a low cost per port. Compared to standard AV switching, NETGEAR is probably the best value out there.

View full review »
KH
Independent Consultant at a tech company with 1-10 employees

They're good value. They're good entry-level switches. I know Cisco generally has a lot more capability. But, for an organization this size, we don't need that. So they're good value for the cost and what we need.

The cost of the hardware and additional services is low compared to others. Anything that's cheaper, for the same output, is a good thing for our business.

View full review »
AB
Cybersecurity & IT Operations Professional (VirtualCxO) at BrainWave Consulting Company, LLC

Netgear costs are very straightforward. There is very little in the way of separate licensing costs.

View full review »
Fidy Avotra RAJAONARIVONY - PeerSpot reviewer
Head of Purchasing and Logistics Department at Teknet Group

The product has the best price in the market.

View full review »
BS
Technical Staff at Vijaya Enterprises

I would rate the tool's pricing a nine out of ten. 

View full review »
it_user646785 - PeerSpot reviewer
Senior System Administrator at a agriculture with self employed

It's a great price-to-performance solution. I think it's singularly the best price-per-performance we can find, if not just straight performance to begin with.

We like the idea that they're going with the Insight Pro licensing. We like that it's a per-device and it's handled by us, the MSP, versus being handled by them. For instance, with the Merakis, all the licensing is handled by Meraki, and Meraki will try to undersell you or sell you right out of your own client, when it comes to reopening subscriptions.

NETGEAR has taken a different approach and values its partners much better. That's something that's very important to me. There's not a lot of need for licensing other than that, because, while I can buy some types of subscription for some of these, for support and such, we don't really need them. They have a lifetime warranty and we have staff on hand to be able to handle most of the more complex issues that we would have, other than things that need hardware replacement.

The cost of hardware and additional services is lower, absolutely. I wouldn't say "low," but we found it to be lower than other options, and that helps us resell this back to customers who are looking at other things like a Cisco Meraki, where the money is very important. On the school level, municipalities have very limited funds and if they can get more bang for their buck and it really means that much more, then it's a lot easier to sell a NETGEAR than a Cisco Meraki, especially since the longevity is there and there's a better warranty on them.

View full review »
KL
Senior Marketing Officer at a computer software company with 11-50 employees

I believe that the pricing is reasonable.

View full review »
DP
Chef d'entreprise at Winform

The solution has a very reasonable cost.

View full review »
SB
Principal Consultant at a tech consulting company with 1-10 employees

There are two parts to the pricing. There's the pricing of the device itself, which is good. Their licensing model needs work, though. The licensing model doesn't fit the way MSPs do business. They need to revise it to something that makes more sense for an MSP. And here, I'm specifically talking about Insight Pro licensing.

The cost of hardware and additional service is low. That helps our business because it's easier to make a sale.

View full review »
SB
Technical support engineer at 64 Network security pvt ltd

The solution is expensive. You need to pay the costs one-time. 

View full review »
JC
President at a tech services company with 1-10 employees

This is a one-time purchase and there are no licensing fees.

View full review »
Buyer's Guide
NETGEAR Switches
March 2024
Learn what your peers think about NETGEAR Switches. Get advice and tips from experienced pros sharing their opinions. Updated: March 2024.
765,386 professionals have used our research since 2012.