Ruckus Wireless WAN Implementation Team
The configuration takes around two to three hours, and deployment takes another two to three hours.
For deployment, we need some manpower who are trained enough to deploy. Right now, we are using it at our outdoor mines location. So, we need to install that particular device on the pole or anything where we can install it.
Basically, we are mounting it on the outdoor pole, which is available at our outdoor location. We deploy it at a certain height of around three meters. Therefore we need manpower of one or two people. One holds the ladder and gives support, and the other climbs on the pole and deploys the device.
View full review »We awarded a contract to a local third-party company who did all the setup for us, and then they gave us some training on how to use it day-to-day.
View full review »The deployment time varies based on our customers' requirements. If it aligns with standard configurations, it can be completed in approximately ten minutes. However, for more complex setups or larger enterprises, the deployment might extend to ten hours.
View full review »Buyer's Guide
Ruckus Wireless WAN
April 2024
Learn what your peers think about Ruckus Wireless WAN. Get advice and tips from experienced pros sharing their opinions. Updated: April 2024.
768,578 professionals have used our research since 2012.
TK
Terah Kaggwa
Technical manager at Djamboree
The deployment involves setting up the controller and deploying the wireless units at the specified locations. It's relatively straightforward.
We have an in-house engineer who handles the deployment. We mostly use on-premises deployment.
View full review »LV
Lourika Vlietstra
Senior Project Manager / Project Director at three6five network solutions
The deployment of Ruckus Wireless WAN was done in-house. You can deploy an entire hotel in one day from installation to commissioning, etc. If your backbone is working and your routing is up, then the product is very easy to deploy. It's definitely not a long, painful process.
View full review »AA
Sigma.3 - Ashroff
Director, Technical Solutions at Sigma.3 Pte Ltd
We have experience using both solutions—both the cloud deployment and the on-premises controller. Ruckus's private cloud is exceptionally well-executed, particularly for basic needs in MDUs and hospitality settings. However, for enterprise applications, it may necessitate additional equipment, especially for data plans. Yet, once integrated with data plans, it performs effectively.
View full review »Our service provider installed the device, and it is now operational. We are currently using four devices, and everything is fine. However, we are now recording seven devices.
The service provider had one person install the device. It took one day to complete the installation.
View full review »US
Uwe Schmidt
Managing Director at SiT Global GmbH
We're implementors as well as resellers. We handle the implementation for our clients.
View full review »We implemented the solution through a third-party integrator. Two people are required to deploy the solution. The solution's deployment took a few hours.
View full review »The resellers will do the deployments, but if the reseller does not want to do it themselves, we will do it for them.
One person is more than enough for maintenance from a configuration standpoint, while two or three people are required for complete deployment and repair of the AP switches devices.
Technicians who will help us with mounting, follow-up, and other similar tasks.
View full review »We can handle the setup in-house. We don't need any consultants to help us.
View full review »We had some local support available. With that help, the setup was no big challenge.
The deployment was kind of a mix of in-house versus outside assistance. Five years back, this was a new product for us. Based on the global reviews of this product, we took the decision to get some help.
View full review »LJ
Lars Jansson
Owner / Chairman of the Board at NoWire Nordic AB
The amount of people required to support Ruckus Wireless WAN depends on the requirements and what kind of business are you doing with it. We have large installations done by one person, but the ISP has to think about the first-line support. The configuration is not difficult it can be done by one person.
View full review »SV
SivalingamVimal
Infrastructure Solutions Delivery Engineer at Bob Brown Software Design
It took us two days to deploy the solution.
View full review »WA
Wael Awni
Management Board Member and Network Engineer at NewLogics
You don't need an integrator, service, or solution provider to use Ruckus Wireless WAN. The end user can do things by themselves.
View full review »Third-party assistance was required for the implementation of Ruckus Wireless WAN. We used two to three people for the deployment.
View full review »KS
Karma Sangay
Executive Engineer with 11-50 employees
We used an in-house team.
View full review »IJ
IbrahimJaber
Senior Engineer at TIC
We occasionally have a consultant that assists us with implementation.
View full review »EO
EmilioOgando
Integration Manager at Newcom
We implement in-house
View full review »WW
Wesley Wang
DevOps System Engineer at Monash University
The installation can be done on one's own with zero touch configuration.
There are five engineers who are responsible for the deploment and maintenance.
View full review »Buyer's Guide
Ruckus Wireless WAN
April 2024
Learn what your peers think about Ruckus Wireless WAN. Get advice and tips from experienced pros sharing their opinions. Updated: April 2024.
768,578 professionals have used our research since 2012.