2019-06-17T08:45:00Z

What is your primary use case for Statseeker?


How do you or your organization use this solution?

Please share with us so that your peers can learn from your experiences.

Thank you!

Guest
2626 Answers

author avatar
Top 20Real User

We use this solution for monitoring the status of all network devices. We monitor links, bandwidth utilization, and device CPU and memory utilization. We generate reports of the top ten utilization links, which are helpful for acting proactively.

2019-09-18T13:06:00Z
author avatar
Real User

Our primary use case is for polling and interface utilization. The solution helped us to monitor our network availability. Now we're more alert to what's going on.

2019-06-19T08:36:00Z
author avatar
Consultant

Our primary use for this solution was to monitor devices. I was the Statseeker administrator before we switched to a new solution. I do, however, still go back and use it.

2019-06-17T08:46:00Z
author avatar
Real User

We primarily use this solution for educational content.

2019-06-17T08:46:00Z
author avatar
Real User

Our primary use for this solution is historical traffic wrapping. This solution only handles a very small slice of what we actually need to monitor, so it is just another product in a set of products we use.

2019-06-17T08:46:00Z
author avatar
Real User

Our primary use for this solution is network monitoring.

2019-06-17T08:46:00Z
author avatar
Real User

We use this solution to control bandwidth congestion, and also for the recovery of unused data network ports.

2019-06-17T08:46:00Z
author avatar
Real User

Our primary use case for Statseeker is for network monitoring.

2019-06-17T08:46:00Z
author avatar
Top 20Real User

Our primary use case for this solution is network alerting.

2019-06-17T08:46:00Z
author avatar
Real User

I was primarily using this solution for network traffic analysis. We are switching to another product.

2019-06-17T08:46:00Z
author avatar
Real User

We primarily use this solution for monitoring. We use the Mac version. Our investment in this solution was customer-driven. When we have a request from a client business we look at what we have. If we cannot satisfy the request then we look into investments such as this.

2019-06-17T08:45:00Z
author avatar
Top 20Real User

Our primary use case for this solution is fault management.

2019-06-17T08:45:00Z
author avatar
Real User

We primarily use this solution for monitoring. We check primarily for failures or latency in the network.

2019-06-17T08:45:00Z
author avatar
Real User

We have about 800 schools and we use Statseeker to monitor the WAN router at each site. Up/down (uptime and downtime) is our biggest thing. After that, we use it for monitoring bandwidth, interface utilization and different things like that. We use it for all the statistics it can provide in real-time and for historical usage. We use those statistics to plan if there is a need for upgrades — things like that.

2019-06-17T08:45:00Z
author avatar
Real User

Our primary use for this solution is to watch and record ports for the entire network.

2019-06-17T08:45:00Z
author avatar
Real User

Our primary use for this solution is troubleshooting. We use it for logging and monitoring the routers and switches in the environment. It assists us with capacity planning.

2019-06-17T08:45:00Z
author avatar
Top 20Real User

Our primary use case for this solution is network monitoring.

2019-06-17T08:45:00Z
author avatar
Real User

We primarily use this solution for polling and interface utilization.

2019-06-17T08:45:00Z
author avatar
Top 20Real User

Our primary and only use for this product is for network monitoring.

2019-06-17T08:45:00Z
author avatar
Top 20Real User

Our primary use of Statseeker is for our interface. In our data center, we are typically a Cisco shop. We can now look thirty days into the future based on past stats of trends or fashion. If we have 10 servers in the field office, we can jump up to twenty based on utilization. We have the evidence. It is a lot of manual work to create those reports, but a bit easier now.

2019-06-17T08:45:00Z
author avatar
Real User

We use Statseeker to monitor all the devices on our network. This includes: * the network switches * our gateways to the cloud * our kiosks that are mounted throughout our building * any other device we deem to be important We want to know exactly when they go down.

2019-06-17T08:45:00Z
author avatar
Real User

Our primary use of Statseeker is for monitoring and the utilization of our network devices. We initially got Statseeker because we needed more visibility and better historical data.

2019-06-17T08:45:00Z
author avatar
Top 20Real User

Our main use of Statseeker is for verifying traffic after several upgrades or failures.

2019-06-17T08:45:00Z
author avatar
Top 20Real User

We use it for bandwidth monitoring and email alerts when there are significant events like interfaces or devices that are down. Those are our big use cases.

2019-06-17T08:45:00Z
author avatar
Real User

We use it for network monitoring, mainly for our core in-campus devices.

2019-06-17T08:45:00Z
author avatar
Real User

Our primary use case is for monitoring traffic.

2019-06-17T08:45:00Z
Learn what your peers think about Statseeker. Get advice and tips from experienced pros sharing their opinions. Updated: April 2020.
441,850 professionals have used our research since 2012.