We performed a comparison between Juniper EX Series Ethernet Switches and NETGEAR Switches based on real PeerSpot user reviews.
Find out in this report how the two Ethernet Switches solutions compare in terms of features, pricing, service and support, easy of deployment, and ROI."The scalability is excellent. It's one of the aspects of the solution that is quite good."
"Juniper Ethernet Switches are high-end solutions."
"The most valuable feature of Juniper Ethernet Switches is the public remote configuration option. If you make a mistake in the configuration you can roll it back to the previous configuration automatically after a set time frame increment, such as five or more minutes. In all the other competitors once you press to enter the new configuration is already written in. You cannot roll it back automatically."
"It has features that allow us to go back to previous configurations."
"The Juniper Ethernet switch feature I find the most valuable is reliability."
"The setup phase was straightforward."
"The combination of hardware and software makes it a very good solution. It is a modern protocol that they have supported in the switches. The solution has good performance."
"In terms of performance, Juniper switches have a more user-friendly interface and more features than Cisco products."
"The most important feature is the failover, the LACP links. That's the dual set it allows. We have redundant core switches and, if one fails or one network adapter fails, the other one can take over without problems."
"This switch is Layer 3, so it is a totally managed system."
"It's nice, if there is an issue, to be able to go in through the remote. The fact that the remote doesn't require a static IP... is nice. They initiate the contact to the outside world, without requiring a static to get in."
"The tool is stable."
"Valuable features include network monitoring and ease of programming for VLANs, etc. I especially like NETGEAR because it's easy to teach system administrators how to use them, how to look at them, how to make changes to them without having the complexity of CLIs, but still having a CLI should we need it."
"We have a wide range of switches for various applications, including a collection specifically designed for ProAV, as well as Multi-gig Switches, which are also quite well-known or unique."
"The remote troubleshooting is pretty easy. You can turn off a port that might have a network loop created, or where there might be a bad NIC card that is creating issues. Being able to turn off that port remotely is fantastic, instead of having to replace the whole switch. Remote management is really easy."
"The cloud management has just been huge for us. We have 80 clients and they all have switches... With the cloud-managed Insight ones... we know more information without having to do complicated SNMP traps. We get nice emails, we get a web interface, and we're not having to wait for our RMM tools to get SNMP traffic to notify us. We don't have to do complicated configurations."
"Some areas of technical support could be better."
"Jupiter Switches' configuration is a little difficult to understand."
"Stability could be better, especially during a reboot. We have had some issues recently with the software getting corrupt on reboot, which causes a lot of downtime."
"Juniper EX Series Ethernet Switches is not cheap. The tool needs improvement in UI."
"Their web GUI interface needs to be a lot better, especially when compared to HP. The command line is good, but you have to know how to get around it. The GUI is clunky and very slow."
"The solution is a bit costly compared to other products."
"The durability of the devices could be better."
"The packet channelizing feature should be improved."
"The product could be more robust."
"The web interface has been a little sketchy on occasion. Sometimes I have to reload the page to get things to show up properly, but the switch itself seems fine. The web user interface is a little wonky at times."
"Lacks switches with additional ports that provide room for new protocols of communications."
"When the power does go out, or if we do a soft shutdown, some of the transceivers or the monitor don't recognize when it turns back on, so I have to physically unplug it and plug it back in and then it works. We're working with NETGEAR's engineers to figure out why that's happening."
"My one issue with it is that not all the features of the switch can currently be managed via the portal. For some of the more advanced features, you still have to configure the switch."
"The tool's price could be better."
"The security features must be improved."
"Support needs to be improved."
More Juniper EX Series Ethernet Switches Pricing and Cost Advice →
Juniper EX Series Ethernet Switches is ranked 8th in Ethernet Switches with 64 reviews while NETGEAR Switches is ranked 4th in Ethernet Switches with 50 reviews. Juniper EX Series Ethernet Switches is rated 8.2, while NETGEAR Switches is rated 8.2. The top reviewer of Juniper EX Series Ethernet Switches writes "Provides campus switches and access switches that are simple to deploy, but the code isn't stable enough for a leaf and spine design". On the other hand, the top reviewer of NETGEAR Switches writes "You can stack different models of switches which makes the scalability great". Juniper EX Series Ethernet Switches is most compared with Cisco Ethernet Switches, Aruba Switches, Arista Networks Platform, Ubiquiti UniFi Switches and Mellanox Switches, whereas NETGEAR Switches is most compared with D-Link Ethernet Switches, Cisco Linksys Ethernet Switches, Cisco Ethernet Switches, Ubiquiti UniFi Switches and HPE Ethernet Switches. See our Juniper EX Series Ethernet Switches vs. NETGEAR Switches report.
See our list of best Ethernet Switches vendors.
We monitor all Ethernet Switches reviews to prevent fraudulent reviews and keep review quality high. We do not post reviews by company employees or direct competitors. We validate each review for authenticity via cross-reference with LinkedIn, and personal follow-up with the reviewer when necessary.