We performed a comparison between Juniper EX Series Ethernet Switches and NETGEAR Switches based on real PeerSpot user reviews.
Find out in this report how the two Ethernet Switches solutions compare in terms of features, pricing, service and support, easy of deployment, and ROI."The setup phase was straightforward."
"We have multiple cases of the customers trying to upgrade their network from Cisco, Aruba and Huawei to Juniper. They do this basically because they want to modernise their network and have an increased capacity. This shift improves their functionality because the Juniper Ethernet switches are more advanced. We provide them with assistance to configure switches, access points and Wi-Fi."
"The scalability is excellent. It's one of the aspects of the solution that is quite good."
"The most valuable feature is the Spanning Tree Protocol (STP)."
"The Juniper Ethernet switch feature I find the most valuable is reliability."
"The feature I like the most is the ability to reword changes before committing to the change. We can always reword changes in 10 minutes if they don't work."
"In terms of performance, Juniper switches have a more user-friendly interface and more features than Cisco products."
"Juniper Switches' best feature is its flexibility."
"The solution helps transfer data."
"The remote troubleshooting is pretty easy. You can turn off a port that might have a network loop created, or where there might be a bad NIC card that is creating issues. Being able to turn off that port remotely is fantastic, instead of having to replace the whole switch. Remote management is really easy."
"The most valuable feature is definitely the fully functional IGMP snooping and querier, out-of-the-box, that the switch provides. With most if not all switches that we've worked with previously, at a minimum you have to enable a couple of different options... It's really a good feature to have that stuff enabled and fully functional out-of-the-box so that [AV techs] don't have to worry about configuring any of that stuff."
"Remote management is the most important thing for us. And monitoring, of course, allows us to see when something is wrong with a client. We get notified that an access point is down, for instance, or that there are too many clients on one access point, so that we can log into the portal and manage the solution with the client instantly, from either a laptop or a cell phone, with the Insight app."
"The remote troubleshooting features provide a single pane of glass where I can see my all my clients' equipment. If they're reporting a problem, I can go to the Insight Pro interface online and I can bring up that client and I can see all their devices and the status of all their devices."
"There is a lot of helpful documentation that helps with the configuration process."
"You are not limited in terms of stacking ports, and especially, if you're using the 96X as a core switch, the scalability, I could see this being very large. If you're using a type of a hybrid topology with a core switch going out to multiple switch stacks, or something like that, I could see the scalability of this being very good, especially considering the kind of backplane switching capacity on the 96X."
"NETGEAR Switches has valuable cybersecurity features."
"In the next release of this solution, I would like to see better integration with software-defined networking."
"The operating system could be better."
"You need to make a few local configurations to work with the solution. We have faced issues with the tool's stability."
"The management platforms for the network need improvement."
"All Juniper documentation is terrible."
"It would be nice to have a more available list of modules that you can get for this solution."
"The difficulty of the installation of Juniper Ethernet Switches depends on the environment it is being implemented in. It is fairly straightforward in terms of being able to source the technical information as we need it. However, this process could improve."
"Juniper EX Series could improve the process and ease of updating the software. It is a difficult process."
"What I'd like to see is more compatibility with virtual stacking, so that 4300-series switches and 3300-series switches will actually stack together and that virtual switch stacks, themselves, are not limited to just six devices, so that they can create larger loops with more bandwidth and more redundancy."
"This product lacks a CLI interface."
"The M4250 switches needs more SFP models."
"There is a lack of documentation, and the documentation I have is unclear, so I have to rely on Google for information."
"Their old firmware was a problem for us and we're still working on it. It didn't apply correctly so it took about half of our switches offline, which meant we couldn't use some of the functionality like the firmware updates. Unfortunately with that firmware, which they've sorted out, if you don't go through all the firmware and make sure it's past that point and back online, that's an issue with them. It's something to cautious about"
"It's worked for the most part, but we've had to power cycle a few devices. We've had to ask customers to manually power cycle them with the power cord, after some of the firmware updates. Their updating needs a little improvement."
"One area that has room for improvement, and I know NETGEAR is working on it, is adding more features to the products lines in terms of what we can manage through the Insight portal... not all Layer 2 or Layer 3 settings are there yet."
"There's a lack of chips and, consequently, a lack of deliveries. They're out of stock at their European warehouse."
More Juniper EX Series Ethernet Switches Pricing and Cost Advice →
Juniper EX Series Ethernet Switches is ranked 8th in Ethernet Switches with 64 reviews while NETGEAR Switches is ranked 4th in Ethernet Switches with 50 reviews. Juniper EX Series Ethernet Switches is rated 8.2, while NETGEAR Switches is rated 8.2. The top reviewer of Juniper EX Series Ethernet Switches writes "Provides campus switches and access switches that are simple to deploy, but the code isn't stable enough for a leaf and spine design". On the other hand, the top reviewer of NETGEAR Switches writes "You can stack different models of switches which makes the scalability great". Juniper EX Series Ethernet Switches is most compared with Cisco Ethernet Switches, Aruba Switches, Arista Networks Platform, Ubiquiti UniFi Switches and Mellanox Switches, whereas NETGEAR Switches is most compared with D-Link Ethernet Switches, Cisco Linksys Ethernet Switches, Cisco Ethernet Switches, Ubiquiti UniFi Switches and HPE Ethernet Switches. See our Juniper EX Series Ethernet Switches vs. NETGEAR Switches report.
See our list of best Ethernet Switches vendors.
We monitor all Ethernet Switches reviews to prevent fraudulent reviews and keep review quality high. We do not post reviews by company employees or direct competitors. We validate each review for authenticity via cross-reference with LinkedIn, and personal follow-up with the reviewer when necessary.