We performed a comparison between Juniper EX Series Ethernet Switches and NETGEAR Switches based on real PeerSpot user reviews.
Find out in this report how the two Ethernet Switches solutions compare in terms of features, pricing, service and support, easy of deployment, and ROI."The most valuable feature of Juniper Ethernet Switches is the public remote configuration option. If you make a mistake in the configuration you can roll it back to the previous configuration automatically after a set time frame increment, such as five or more minutes. In all the other competitors once you press to enter the new configuration is already written in. You cannot roll it back automatically."
"I like the simplicity of it."
"The solution has a high level of network functionality."
"This solution is impeccable."
"The feature I like the most is the ability to reword changes before committing to the change. We can always reword changes in 10 minutes if they don't work."
"It is stable."
"It's easy to use."
"The solution is stable and scalable."
"The remote troubleshooting is pretty easy. You can turn off a port that might have a network loop created, or where there might be a bad NIC card that is creating issues. Being able to turn off that port remotely is fantastic, instead of having to replace the whole switch. Remote management is really easy."
"The stability is good. I would rate the stability a ten out of ten."
"Valuable features include network monitoring and ease of programming for VLANs, etc. I especially like NETGEAR because it's easy to teach system administrators how to use them, how to look at them, how to make changes to them without having the complexity of CLIs, but still having a CLI should we need it."
"The ease of use of these switches is very good because of the Cisco CLI. If you are familiar with CLI, then you can configure the switch that way. It also has a relatively straightforward web interface. Using the web interface is good for beginners or people who aren't familiar with Cisco CLI. However, having a common command line interface method is great for some of our more advanced guys who are familiar with it."
"Netgear switches are highly reliable. We haven't done anything particularly sophisticated with them."
"We have a wide range of switches for various applications, including a collection specifically designed for ProAV, as well as Multi-gig Switches, which are also quite well-known or unique."
"The solution is reliable and it is easy to setup."
"I'm satisfied with the stability of NETGEAR Switches."
"Juniper should improve the support services provided to users, as it is one of its areas with certain shortcomings."
"The packet channelizing feature should be improved."
"The initial setup for Juniper switches is complex. Juniper has a new program that solves that problem a little bit, but it is expensive, so I don't use it. It is Juniper Mesh, Juniper Wire, or something like that where you plug in a switch, and it goes out to their cloud, finds a config, and brings it down. So, you can do everything cloud-based, but there is a fee for that. It is expensive, so I've never used it. If we were starting, we would try to do something like that. It is more for a large enterprise for managing hundreds of switches versus what we're doing. They should make its price more cost-effective or include it for new or smaller companies."
"Its distribution channel and the ease of availability should be improved."
"EX switches take too long to boot when we restart them for maintenance. We need to minimize downtime. Another issue is the command line interface. Juniper's commands are different from other switches, so it's hard to remember them."
"The upgrading of the system should be simplified and made faster."
"The configuration could be made simpler."
"I have found the scalability could be improved in the version I was using."
"An area for improvement would be creating a wizard that can do a lot of common stuff. Instead of having some manual configuration for common features, they may want to have a single wizard that could be put in place which would let you walk through creating multiple VLANs and different routes between VLANs in a wizard. Then, you wouldn't have to dig in so deep."
"Netgear switches could be cheaper."
"Lacks switches with additional ports that provide room for new protocols of communications."
"There is a technical problem they can't seem to solve. It doesn't support multicast packets. In layman's terms, Mac computers can't print over the network."
"The ‘how-to’ guides could do with some improvements. We got in trouble following the stacking and Dante set-up guides. If these would have been accurate, we would not have lost three days."
"There's a lack of chips and, consequently, a lack of deliveries. They're out of stock at their European warehouse."
"NETGEAR Switches could provide local technical support services."
"I would like an email notification in case of errors or failures. If it was possible for the switch to email out an error log or notification note, especially in cases where we have the switches offsite (on the other side of town), then if something was to go wrong, it would be great to know about it before our client goes to use it for a big event, and it doesn't work. While I know that it does do SNMP, which is sort of standard, in the AV world, that is not always an option for us. We are usually running our own little network box and don't always have access to an SNMP server. We may just have simple Internet access or something similar."
More Juniper EX Series Ethernet Switches Pricing and Cost Advice →
Juniper EX Series Ethernet Switches is ranked 8th in Ethernet Switches with 64 reviews while NETGEAR Switches is ranked 4th in Ethernet Switches with 50 reviews. Juniper EX Series Ethernet Switches is rated 8.2, while NETGEAR Switches is rated 8.2. The top reviewer of Juniper EX Series Ethernet Switches writes "Provides campus switches and access switches that are simple to deploy, but the code isn't stable enough for a leaf and spine design". On the other hand, the top reviewer of NETGEAR Switches writes "You can stack different models of switches which makes the scalability great". Juniper EX Series Ethernet Switches is most compared with Cisco Ethernet Switches, Aruba Switches, Arista Networks Platform, Ubiquiti UniFi Switches and Mellanox Switches, whereas NETGEAR Switches is most compared with D-Link Ethernet Switches, Cisco Linksys Ethernet Switches, Cisco Ethernet Switches, Ubiquiti UniFi Switches and HPE Ethernet Switches. See our Juniper EX Series Ethernet Switches vs. NETGEAR Switches report.
See our list of best Ethernet Switches vendors.
We monitor all Ethernet Switches reviews to prevent fraudulent reviews and keep review quality high. We do not post reviews by company employees or direct competitors. We validate each review for authenticity via cross-reference with LinkedIn, and personal follow-up with the reviewer when necessary.