We performed a comparison between Juniper EX Series Ethernet Switches and NETGEAR Switches based on real PeerSpot user reviews.
Find out in this report how the two Ethernet Switches solutions compare in terms of features, pricing, service and support, easy of deployment, and ROI."The platform is very stable in terms of consistency and reliability."
"The virtual Chassis feature for stacking is good in general, with high bandwidth for the link, which is good."
"The GUI interface distinguishes it from other vendors and makes it easy to operate."
"Juniper Switches' best feature is its flexibility."
"We have multiple cases of the customers trying to upgrade their network from Cisco, Aruba and Huawei to Juniper. They do this basically because they want to modernise their network and have an increased capacity. This shift improves their functionality because the Juniper Ethernet switches are more advanced. We provide them with assistance to configure switches, access points and Wi-Fi."
"It's pretty good as compared to other vendors."
"It has features that allow us to go back to previous configurations."
"The scalability is excellent. It's one of the aspects of the solution that is quite good."
"The remote troubleshooting is pretty easy. You can turn off a port that might have a network loop created, or where there might be a bad NIC card that is creating issues. Being able to turn off that port remotely is fantastic, instead of having to replace the whole switch. Remote management is really easy."
"The initial setup was straightforward."
"This is a cost-effective solution."
"The most important feature is the failover, the LACP links. That's the dual set it allows. We have redundant core switches and, if one fails or one network adapter fails, the other one can take over without problems."
"The solution is stable."
"The initial setup is easy."
"Since it has a web interface, it is easy to set up. You don't have to take three years of training somewhere for a lot of money."
"The solution is simple to use. I am also impressed with the tool's GUI and CLI."
"Some areas of technical support could be better."
"Juniper Ethernet Switches could improve in the EX 2300 model because it does not support IPsec VPN. Only the models at 3400 or higher support it. Additionally, there is a need for support for Mac which is lacking. Some of their competitors, such as Cisco, support Mac."
"It was very difficult to get technical support, here in Egypt. There is no local support available."
"Juniper's support could be much better and faster."
"They could improve the code, as there are some issues with it."
"We are undergoing a migration to software-defined networking. Different vendors have to integrate with each other and we are not seeing this type of capability within Juniper. We are getting left behind in this technology trend by staying with this solution. Juniper is also losing a bit of market share because of this."
"The updates are constantly breaking."
"One potential drawback of the Juniper EX Series has been that those without experience using a command-line interface (CLI) may find it intimidating. However, Junos is working on improving this by offering tools, such as Juniper Mist with Wired Assurance and Apstra. Additionally, the graphical user interface (GUI) could be improved as it has been considered lackluster across the board in Junos."
"Their old firmware was a problem for us and we're still working on it. It didn't apply correctly so it took about half of our switches offline, which meant we couldn't use some of the functionality like the firmware updates. Unfortunately with that firmware, which they've sorted out, if you don't go through all the firmware and make sure it's past that point and back online, that's an issue with them. It's something to cautious about"
"One thing I have asked for, something that NETGEAR lacks that I would love to see — and from what I understand it's in the works — is a REST API to programmatically interface with multiple switches. That would be a great feature."
"There's a lack of chips and, consequently, a lack of deliveries. They're out of stock at their European warehouse."
"Being able to pass AVB traffic over these switches, that would be a huge add. There are not many switches out that support that. The GS728TP NETGEAR switches used to or still do support AVB, but it would be ideal if the 4300 Series could support it as well."
"One area that has room for improvement, and I know NETGEAR is working on it, is adding more features to the products lines in terms of what we can manage through the Insight portal... not all Layer 2 or Layer 3 settings are there yet."
"They need to continue moving forward with their consulting in the AV realm to find out what is needed. They are some differences in the M4300 line and the larger M4500 line right now. They could produce a 1 Gigabit variety that could be a bit cheaper that might fit into that, since the majority of the projects that we see are still in that 1 Gigabit bandwidth threshold. Along with that, a great option would be if it would provide the same modular ability on a lower level."
"One thing I would like to see improved is the response time for technical support."
"The ‘how-to’ guides could do with some improvements. We got in trouble following the stacking and Dante set-up guides. If these would have been accurate, we would not have lost three days."
More Juniper EX Series Ethernet Switches Pricing and Cost Advice →
Juniper EX Series Ethernet Switches is ranked 8th in Ethernet Switches with 64 reviews while NETGEAR Switches is ranked 4th in Ethernet Switches with 50 reviews. Juniper EX Series Ethernet Switches is rated 8.2, while NETGEAR Switches is rated 8.2. The top reviewer of Juniper EX Series Ethernet Switches writes "Provides campus switches and access switches that are simple to deploy, but the code isn't stable enough for a leaf and spine design". On the other hand, the top reviewer of NETGEAR Switches writes "You can stack different models of switches which makes the scalability great". Juniper EX Series Ethernet Switches is most compared with Cisco Ethernet Switches, Aruba Switches, Arista Networks Platform, Ubiquiti UniFi Switches and Mellanox Switches, whereas NETGEAR Switches is most compared with D-Link Ethernet Switches, Cisco Linksys Ethernet Switches, Cisco Ethernet Switches, Ubiquiti UniFi Switches and HPE Ethernet Switches. See our Juniper EX Series Ethernet Switches vs. NETGEAR Switches report.
See our list of best Ethernet Switches vendors.
We monitor all Ethernet Switches reviews to prevent fraudulent reviews and keep review quality high. We do not post reviews by company employees or direct competitors. We validate each review for authenticity via cross-reference with LinkedIn, and personal follow-up with the reviewer when necessary.