We performed a comparison between Juniper EX Series Ethernet Switches and NETGEAR Switches based on real PeerSpot user reviews.
Find out in this report how the two Ethernet Switches solutions compare in terms of features, pricing, service and support, easy of deployment, and ROI."It is easy to configure, and there are three routing switches."
"The setup phase was straightforward."
"Juniper is the best when it comes to the core layer."
"The combination of hardware and software makes it a very good solution. It is a modern protocol that they have supported in the switches. The solution has good performance."
"The virtual Chassis feature for stacking is good in general, with high bandwidth for the link, which is good."
"The solution is scalable. It supports my five-year expansion plan. I could expand without a problem."
"The solution is certainly scalable."
"It has features that allow us to go back to previous configurations."
"The most valuable feature is definitely the fully functional IGMP snooping and querier, out-of-the-box, that the switch provides. With most if not all switches that we've worked with previously, at a minimum you have to enable a couple of different options... It's really a good feature to have that stuff enabled and fully functional out-of-the-box so that [AV techs] don't have to worry about configuring any of that stuff."
"The ease of use of these switches is very good because of the Cisco CLI. If you are familiar with CLI, then you can configure the switch that way. It also has a relatively straightforward web interface. Using the web interface is good for beginners or people who aren't familiar with Cisco CLI. However, having a common command line interface method is great for some of our more advanced guys who are familiar with it."
"As far as remoting into it goes, it is very efficient because I can do it from anywhere, through the remote software. I can get right into it, I can change settings really quickly, if a customer needs to add another device into it or if I need to make changes on the VLANs that we created."
"One of the biggest benefits of the remote management is that it's easy to use and you can use it from a mobile device or tablet with the app they've developed... If one of my engineers is out in the field at a client and an alert comes in from another client, that engineer can take that alert and look at it in real-time."
"The High Bandwidth AV-over-IP functionality of these switches has been fantastic, especially in leaf-and-spine. We've been able to build redundancy and they seem to outperform even the Cisco Catalyst, which is about twice as expensive as the M-series switches are."
"The most valuable feature to me is the modular side of things, being able to replace a module and a transceiver at our beck and call. If something goes down, or a piece of equipment is broken, I don't have to replace the whole switch. I can just replace the part that's broken or the part that is no longer working. I can get them back up and working within a matter of minutes, versus having to replace everything and reprogram everything. It's a huge time-saver."
"The big winner for NETGEAR is their modular switch: the 96X version. That is something that you don't see in the market anywhere else, except for Cisco who has it at a high level for a high expense. The ability to customize your own switch with their modules is a big plus for what we do in the market right now. Instead of having to piece together standardized switches, trying to make something work, or fitting the design into the mold, the modular switches are aware that you can make a mark in the industry because you purchased one switch and design with different modules added and removed later on for functionality."
"The solution is simple to use. I am also impressed with the tool's GUI and CLI."
"The configuration could be made simpler."
"The upgrading of the system should be simplified and made faster."
"Juniper Ethernet Switches' operating systems get corrupted when the power fails. They have to improve this issue. I may have to use a newer version."
"The difficulty of the installation of Juniper Ethernet Switches depends on the environment it is being implemented in. It is fairly straightforward in terms of being able to source the technical information as we need it. However, this process could improve."
"Juniper EX Series Ethernet Switches lack to offer the latest management tools."
"The protocols can be tunneled, but on a global basis, not on an interface, and this is a feature that should be added."
"The Virtual Chassis Fabric is kind of complicated to troubleshoot sometimes. On the MPLS side, they're good — they're fine for the pseudo-wires and stuff—but they need more work on the LAN. It is difficult to troubleshoot their LAN technologies like Virtual Chassis."
"Juniper Ethernet Switches could improve in the EX 2300 model because it does not support IPsec VPN. Only the models at 3400 or higher support it. Additionally, there is a need for support for Mac which is lacking. Some of their competitors, such as Cisco, support Mac."
"It's worked for the most part, but we've had to power cycle a few devices. We've had to ask customers to manually power cycle them with the power cord, after some of the firmware updates. Their updating needs a little improvement."
"Their old firmware was a problem for us and we're still working on it. It didn't apply correctly so it took about half of our switches offline, which meant we couldn't use some of the functionality like the firmware updates. Unfortunately with that firmware, which they've sorted out, if you don't go through all the firmware and make sure it's past that point and back online, that's an issue with them. It's something to cautious about"
"My one issue with it is that not all the features of the switch can currently be managed via the portal. For some of the more advanced features, you still have to configure the switch."
"I'd like to see a little bit of slowdown on the firmware updates. They've been doing a lot of them. I don't know if that's just because it's such a new product line, but the firmware updates have been a little annoying because they've been coming once a week. For a switch, that's a little extreme."
"One thing I would like to see improved is the response time for technical support."
"Though the tool's useability is good, it has certain shortcomings where improvements are required."
"Netgear switches could be cheaper."
"Being able to pass AVB traffic over these switches, that would be a huge add. There are not many switches out that support that. The GS728TP NETGEAR switches used to or still do support AVB, but it would be ideal if the 4300 Series could support it as well."
More Juniper EX Series Ethernet Switches Pricing and Cost Advice →
Juniper EX Series Ethernet Switches is ranked 8th in Ethernet Switches with 65 reviews while NETGEAR Switches is ranked 4th in Ethernet Switches with 50 reviews. Juniper EX Series Ethernet Switches is rated 8.2, while NETGEAR Switches is rated 8.2. The top reviewer of Juniper EX Series Ethernet Switches writes "Provides campus switches and access switches that are simple to deploy, but the code isn't stable enough for a leaf and spine design". On the other hand, the top reviewer of NETGEAR Switches writes "You can stack different models of switches which makes the scalability great". Juniper EX Series Ethernet Switches is most compared with Cisco Ethernet Switches, Aruba Switches, Arista Networks Platform, Ubiquiti UniFi Switches and Mellanox Switches, whereas NETGEAR Switches is most compared with D-Link Ethernet Switches, Cisco Linksys Ethernet Switches, Ubiquiti UniFi Switches, Cisco Ethernet Switches and HPE Ethernet Switches. See our Juniper EX Series Ethernet Switches vs. NETGEAR Switches report.
See our list of best Ethernet Switches vendors.
We monitor all Ethernet Switches reviews to prevent fraudulent reviews and keep review quality high. We do not post reviews by company employees or direct competitors. We validate each review for authenticity via cross-reference with LinkedIn, and personal follow-up with the reviewer when necessary.