We performed a comparison between Juniper EX Series Ethernet Switches and NETGEAR Switches based on real PeerSpot user reviews.
Find out in this report how the two Ethernet Switches solutions compare in terms of features, pricing, service and support, easy of deployment, and ROI."One of the most valuable features of Juniper Ethernet Switches is they are rugged."
"The GUI interface distinguishes it from other vendors and makes it easy to operate."
"Junos OS is extremely flexible and easy to pick up."
"I would rate this solution a 10 out of 10 for scalability."
"Juniper Ethernet Switches' best features are the high packer sorting and throughput, good uplink port capacity, and virtual setup."
"It is easy to configure, and there are three routing switches."
"The most valuable feature of Juniper Ethernet Switches is the public remote configuration option. If you make a mistake in the configuration you can roll it back to the previous configuration automatically after a set time frame increment, such as five or more minutes. In all the other competitors once you press to enter the new configuration is already written in. You cannot roll it back automatically."
"In terms of performance, Juniper switches have a more user-friendly interface and more features than Cisco products."
"The High Bandwidth AV-over-IP functionality of these switches has been fantastic, especially in leaf-and-spine. We've been able to build redundancy and they seem to outperform even the Cisco Catalyst, which is about twice as expensive as the M-series switches are."
"Remote management is the most important thing for us. And monitoring, of course, allows us to see when something is wrong with a client. We get notified that an access point is down, for instance, or that there are too many clients on one access point, so that we can log into the portal and manage the solution with the client instantly, from either a laptop or a cell phone, with the Insight app."
"Its setup, usage, and access are most valuable. It is a very easy switch to set up."
"The cloud management has just been huge for us. We have 80 clients and they all have switches... With the cloud-managed Insight ones... we know more information without having to do complicated SNMP traps. We get nice emails, we get a web interface, and we're not having to wait for our RMM tools to get SNMP traffic to notify us. We don't have to do complicated configurations."
"The remote management tools are fantastic. The combination of the webpage as well as the app makes life so much easier. I don't need to go and visit sites to do upgrades or any sorts of changes. The firmware can all be deployed remotely. I can see the traffic on each of the switch ports remotely as well, so I can see if we've got problems, down to an individual port. It's very granular."
"Netgear switches are highly reliable. We haven't done anything particularly sophisticated with them."
"The remote troubleshooting is pretty easy. You can turn off a port that might have a network loop created, or where there might be a bad NIC card that is creating issues. Being able to turn off that port remotely is fantastic, instead of having to replace the whole switch. Remote management is really easy."
"As far as remoting into it goes, it is very efficient because I can do it from anywhere, through the remote software. I can get right into it, I can change settings really quickly, if a customer needs to add another device into it or if I need to make changes on the VLANs that we created."
"It would be nice to have a more available list of modules that you can get for this solution."
"The packet channelizing feature should be improved."
"Wireless and monitoring definitely could be improved."
"The Virtual Chassis Fabric is kind of complicated to troubleshoot sometimes. On the MPLS side, they're good — they're fine for the pseudo-wires and stuff—but they need more work on the LAN. It is difficult to troubleshoot their LAN technologies like Virtual Chassis."
"Juniper Ethernet Switches would be improved by upgrading the uplink port in EX2300 categories service from 10G to 25G."
"The stability of this solution should be improved."
"The operating system, Junos OS, often has bugs which forces rollbacks or additional upgrades to resolve."
"I have found the scalability could be improved in the version I was using."
"There are a lot of systems that are moving into different areas. There are a lot of cloud-based things happening. One nice feature that I've seen in other switches is artificial intelligence on the actual porting. They've got AI technology that will tell you when a port is down. They not only tell you when a port is down; they also tell you when a port is running slower. You can do a cable-fault check, or you can do other checks. It would be nice to have this information in NETGEAR. This feature might already be there in a new release of the NETGEAR's firmware, but I haven't seen it."
"An area for improvement would be creating a wizard that can do a lot of common stuff. Instead of having some manual configuration for common features, they may want to have a single wizard that could be put in place which would let you walk through creating multiple VLANs and different routes between VLANs in a wizard. Then, you wouldn't have to dig in so deep."
"There is a technical problem they can't seem to solve. It doesn't support multicast packets. In layman's terms, Mac computers can't print over the network."
"The tool needs to improve its network management. The tool can be also more simplified."
"My one issue with it is that not all the features of the switch can currently be managed via the portal. For some of the more advanced features, you still have to configure the switch."
"Netgear switches could be cheaper."
"I'd like to see a little bit of slowdown on the firmware updates. They've been doing a lot of them. I don't know if that's just because it's such a new product line, but the firmware updates have been a little annoying because they've been coming once a week. For a switch, that's a little extreme."
"There are some design issues on which they really missed the boat. The problem has to do with rack mounting them because the lights and jacks should all be on the front, and the power on the back. The way they did it makes it really difficult to use them in a rack environment, because when the lights are on the opposite side of the jacks... you usually can't see the back side of a rack. You can't get back there to see, so it's just crazy."
More Juniper EX Series Ethernet Switches Pricing and Cost Advice →
Juniper EX Series Ethernet Switches is ranked 8th in Ethernet Switches with 64 reviews while NETGEAR Switches is ranked 4th in Ethernet Switches with 50 reviews. Juniper EX Series Ethernet Switches is rated 8.2, while NETGEAR Switches is rated 8.2. The top reviewer of Juniper EX Series Ethernet Switches writes "Provides campus switches and access switches that are simple to deploy, but the code isn't stable enough for a leaf and spine design". On the other hand, the top reviewer of NETGEAR Switches writes "You can stack different models of switches which makes the scalability great". Juniper EX Series Ethernet Switches is most compared with Cisco Ethernet Switches, Aruba Switches, Arista Networks Platform, Ubiquiti UniFi Switches and Mellanox Switches, whereas NETGEAR Switches is most compared with D-Link Ethernet Switches, Cisco Linksys Ethernet Switches, Cisco Ethernet Switches, Ubiquiti UniFi Switches and HPE Ethernet Switches. See our Juniper EX Series Ethernet Switches vs. NETGEAR Switches report.
See our list of best Ethernet Switches vendors.
We monitor all Ethernet Switches reviews to prevent fraudulent reviews and keep review quality high. We do not post reviews by company employees or direct competitors. We validate each review for authenticity via cross-reference with LinkedIn, and personal follow-up with the reviewer when necessary.