Can someone please help me with Fiberhome 40G S6800 Switches?

To resolve routing issues with your Fiberhome 40G S6800 switches and their default gateway configuration, you may consider the following steps:

• Check your hardware connections and ensure that all physical connections, including cables and interfaces, are correctly connected and functional.


• Access your switch configuration by logging into the switch's management interface using the appropriate credentials.


• Verify that the static route 0.0.0.0/0 is correctly configured with the correct next-hop IP address for your default gateway.


• Double-check the VLAN configurations on your switches to confirm that each VLAN is associated with the correct IP subnet.


• Inspect the routing table to ensure the switch has learned the routes correctly and the default route is listed.


• Confirm that Inter-VLAN routing is enabled and configured correctly to allow traffic to flow between VLANs.


• Review any firewall or security policies that may be blocking traffic between VLANs or to the default gateway.


• Check for any firmware or software updates available for your switches and consider upgrading if necessary.

Additional recommendations are found below:

• For troubleshooting guidance, search for user manuals, documentation, or online forums related to Fiberhome 40G S6800 switches.


• If the issue persists, consider consulting with third-party support services.