Auvik Network Management (ANM) Reviews

It gives me an overall idea of our network. It shows me where things are at. It tells me about devices being down, e.g., printers. I also use it to see web usage, e.g., what sites people are going to. It has a lot of uses. I check to see the overall network topology, when things go down, or whenever I get alerts from Auvik.

I use the reporting part of it. Every day, I take a look at the reports every day.

We are using the latest version.

It makes it simpler and easier for me, as an IT person, to manage my network.

The automation of the network mapping enables junior network specialists to resolve issues directly, freeing up senior-level team members to perform higher-value tasks. This has made our operations easier, simpler, and faster.

As things change on a network, Auvik detects that and automatically changes based on those changes. It makes things a lot easier. You don't have to figure it out by mapping it out on a paper, etc. You can just go there and see how things are connected. So, it definitely helps.

When the systems go down, Auvik is a pretty useful tool. It lets me know ahead of time that I have an issue somewhere.

It is pretty easy to use. It kind of deploys itself. You put some passwords in there and it just kind of spiders out into your network, testing everything. 

Its network discovery capabilities are pretty good. It kind of spiders out and detects pretty much everything on the network, e.g., things that we are using and not using anymore. Its network discovery capabilities allow me to detect these things so I can track them down and shut them off.

The reporting needs a little bit of improvement. Sometimes, I get too many reports. Or, I don't get reports when I should be getting reports. I don't know if this is Auvik's fault or the devices that the reporting is coming from, but I have noticed there have been some discrepancies.

I have been using Auvik for five months.

I have had no issues with its stability.

I get emails letting me know that Auvik will be down for maintenance or updates. No maintenance is required.

Our environment is not very large. I am the only user of it.

I haven't needed to use the technical support.

We didn't previously have anything in place. We looked for a solution because we had nothing in place for network topology and reporting on systems being up and down as well as having the reporting on other things that Auvik does.

The initial setup was a little complex.

The deployment took four sessions, which were an hour long each.

Auvik suggested that we put it on a relay server, then we took it from there.

I did need some help from Auvik specialists. With some of the switches, I needed to get them in the device and reporting correctly. There were some problems, so a specialist had to get on and help me configure it.

Auvik has decreased our mean time to resolution by 50%.

I find Auvik kind of invaluable. It wasn't that expensive and did provide me with a lot of information. So, it is pretty beneficial.

We have licenses per year. It is on a network device, so we pay for switches and firewalls. Everything else is included, e.g., computers, access points, and printers.

Auvik offers a trial period. I recommend taking advantage of that and seeing if it works for your environment.

I looked at competitors. Other providers had multiple systems. I just wanted a single system to do everything. So, Auvik was an all-in-one package.

The TrafficInsights feature shows us network bandwidth usage without the need for expensive, in-line traffic decryption. I use it to see what sites people are going on and how to block certain things, like social media. Though, it is not that important to us, because we don't have an issue with our bandwidth. So, if we had an issue with our bandwidth, I would have to monitor it more, but we don't at the present time.

Auvik is very useful. I would rate it as eight out of 10.

Our primary use cases are for monitoring the network and backup for the switches and firewalls.

The daily backups monitoring and the notifications if something goes down have improved my organization.

Auvik has decreased our mean time to resolution. It's easier to find the devices on the network and pull out the information. Of course, the SNMP is also good to get the logs. It helps in the network debugging or if we have to find any problems. 

The backup feature is really good. The monitoring feature is the main reason why we use Auvik.

Auvik is really helpful and straightforward. I like the free training as well. It's easy to use.

It's done a pretty good job when it comes to its network discovery capabilities. It's pretty accurate. Although, we have a few VPNs and maybe a bit more complicated setup. It's complicated to do it the right way, but it's fine. It's not a big issue. 

We tried the traffic insights feature. My director uses it to report issues about traffic things. It shows the network bandwidth usage without the need for expensive inline traffic decryption.

This feature to check the bandwidth is good because we have a high bandwidth development, so it's hard to check. If we saw high bandwidth usage, it is not an issue for us because it's part of the development.

We use automated out-of-the-box device configuration backups. Before Auvik we didn't have any solution and we haven't had any script or task to do this. And it was one of the selling points for us to have the backups and see the differences between the configurations. So it's not to save anything. It was one of the reasons why we subscribed to Auvik.

I would rate Auvik's time to value for setup time, automated network mapping, and documentation a ten out of ten. 

The cost savings we have realized to the solution versus its cost is an eight out of ten because we haven't saved a lot but it improved our system. 

It's missing the license checker feature. We are using Salesforce and the license is a really crucial part of the development, and we have to monitor it. Now, I have to write a script and then run it on a random Linux box and get a notification if it's expiring. It's a really specific feature. I'm not sure Auvik will develop it.

We used Nagios for monitoring. Since it's an open-source thing, you can easily extend it with plugins. We had the license-checker in Nagios and I miss it in Auvik. There might be a solution to check this license. I just haven't had time to check it.

I have been using Auvik for around a year. 

We haven't experienced any stability issues. 

The scalability is pretty good. We have two studios and two offices and it works perfectly.

We have 50 PCs on one side and 200 PCs on the other side. 

We have one or two users actively using it. 

It requires zero maintenance. Nagios was a continuous polishing and setting up of stuff. Auvik is totally different. Auvik just works out-of-the-box. Nagios needs parenting.

We had one ticket and they solved it. That was our experience with technical support. 

We previously used Nagios. I liked Nagios, but Auvik has much more features. It's an enterprise product instead of a normal one. We tried Auvik, we liked it, and we bought it.

The initial setup was straightforward. My director implemented it and we have two collectors in our two offices. So it was pretty easy. We only had issues with the authentication.

It took around a week. It took one night for him to install it and we were able to fine tune it the next week. We are still learning it.

We did the deployment ourselves. 

The licensing is really good. I felt the price was a bit expensive, but it wasn't my decision.

Auvik only charges for certain devices and not the endpoints. We like the way it's licensed. 

We didn't evaluate other solutions. Auvik wasn't my choice. We had Nagios and we didn't replace it but we started slowly using Auvik and phasing out Nagios.  

My advice would be not to forget to set up the external IP because it was also a good feature.

I would rate Auvik a ten out of ten. 

We're a managed services provider using Auvik to monitor our clients' infrastructure. It is part of a set of tools that keeps us informed when something goes wrong, and we use it to build network maps. You can get an idea of what's happening on-site even if you're unfamiliar with the client's setup.

Sometimes it's the only thing on the network. It's competing with Ubiquiti if we have a Ubiquiti network. Not all the time, but sometimes. 

Auvik allows us to react faster to issues, so we're able to keep our SLAs. 
Depending on the issue, we're reducing our troubleshooting time to within 20 to 30 minutes. Some of our clients have one-hour SLAs, so that's an important turnaround.

We have much better visibility into our clients' networks, which is helpful when we're troubleshooting. When issues go wrong, we're more present. It helps us automate some low-level tasks. For example, it closes tickets on its own. 

The fact that Auvik is a cloud-based solution is crucial because we're primarily a cloud-based company monitoring multiple clients across several sites. The cloud functionality is handy because we get visibility across distinct companies all from one location. 

Monitoring is probably the most active asset Auvik does for us. If a particular device on the network goes down, we have that granularity to see which network element is causing the problem. 

The integrations don't give us too much trouble. It all works with Auto Task reasonably nicely. Once it's set up, it'll close out in Auto Task too, which is great. The network visualization is excellent if you build it out and tweak it, so it reflects the truth. You'll get most of the picture if you let it automatically populate. Once it's built out, the network map is decent.

The network visualization is pretty intuitive. There's not too much going on with the network map there, and you understand what a network looks like. I think it's pretty straightforward.

Auvik doesn't communicate very well with Ubiquiti devices and will incorrectly flag facets as down. Compatibility with Ubiquiti is my biggest pain point with Auvik.

I have been using Auvik since I joined this company in July 2022.

I haven't had any issues with Auvik's stability.

Auvik seems fairly scalable. It works for all of our clients, ranging from 10 devices to a few hundred. It works well for small to medium-sized businesses. 

I give Auvik a solid seven out of 10. I might rate it eight if the Ubiquiti issue wasn't always bugging me. It tells me Ubiquiti devices are down when they're not. I recommend giving it a try. If you are trying to track multiple sites and multiple clients, it's worth a look.

We're an MSP, so we function as the IT company for multiple clients, and we primarily use Auvik for monitoring and troubleshooting network issues. It's deployed across various locations, from small to medium-sized businesses, plus one school system.

Auvik improved our organization by allowing us to stay on top of issues with our clients. It alerts us in a timely manner and allows us to react proactively. In many cases, we get alerts that something is going on before the client realizes it.

The solution affected our IT team's global visibility into our remote and distributed networks, which is helpful. It's great because we can access the Auvik portal anywhere in the world. The visibility it provides is essential, especially for our technicians and engineers working from home.  

Auvik helps us keep our device inventories up-to-date, as it pulls in all the devices on the network and sorts them. We can filter by Mac address, IP address, type of OS and more. This helps tremendously in helping our teams focus on high-level tasks and delegating low-level tasks to junior staff. Most low-level alerts go to our junior admins, which allows them to develop experience and learn the product.    

Auvik keeping our device inventories up-to-date helped save us time and allowed us to find devices we didn't know about when onboarding a client.

We have seen a reduction in our mean time to resolution (MTTR), primarily because our customers don't need to call us; we get alerts and tickets through our ConnectWise portal when Auvik detects an issue. This speeds up our time to repair because we are alerted of problems almost immediately and can start working on a solution.    

The topography and historical data are excellent; the latter essentially allows us to see back in time, which is helpful as users don't always report issues promptly. The ability to go back and look at historical data is a good feature.

It's easy to use the monitoring and management functions; everything is intuitive and self-explanatory. The feature set is more important to us than ease of use, as we work with many intelligent people. However, ease of use is helpful for our level one help desk personnel, who aren't used to using network tools like Auvik. In addition to being intuitive, the ease of use flattens the learning curve for our less experienced employees.   

Regarding Auvik helping to visualize our network mapping/topology, it's elementary. It places devices logically in a topology that's easy to understand. We can collapse and expand elements, making it easy to find information and devices in the system. I rate the tool ten out of ten for the overall intuitiveness of network visualization. Everything is worded perfectly and makes perfect sense to anyone working in the IT field.     

We have seen time-to-value with Auvik; it helped us on many occasions when our clients had network problems. It assisted us in ironing out those issues.  

The performance could be better; it gets a little clunky and slow-moving at times, and I wonder if that's due to the VM or if it's just the nature of the tool.

Another issue is the solution sometimes signs users out at inopportune times without warning. I'll be working in one window perfectly fine, and I would have a second session open in another window, which can time out and force me to log back in, even though I'm still logged on to the platform in another window. That can be frustrating.

I've been using the solution for about six years. 

The stability is excellent as long as the network, VMs, and hardware are suitable. Running low-quality equipment would affect the stability and user experience.

The solution scales well. Once you reach around 2,000 devices, a second device is required on the network to offset some of the performance issues that come with that, but it scales easily. It would just be a second OVA running on a box.

The technical support is excellent and very quick to respond. They helped us with an issue concerning performance hits in some equipment due to the frequency of the scans Auvik was running.

Positive

We evaluated some trial solutions for other network management tools, and they didn't fit us. SolarWinds NPM was a resource hog, and it wasn't cloud-based, so we ended up going with Auvik because of the ability to use it in the cloud.

We primarily used the in-built networking tools from each vendor. Switching to Auvik saves us about 20 hours because we can see all the relevant data and manage the networks from a single pane of glass.  

The initial setup was straightforward; it consisted of deploying an OVA which searches for the Auvik instance in the cloud and locks it in once authorized. It's between three and five steps, so it's quick to get up and running.

After the collector code was implemented, our network mapping started to populate almost immediately. However, we had SNMP set up, which needs to be done ahead of time for network devices. The solution pulls in devices and connections via ICMP based on the network it discovers. It may draw in limited details initially until the rest of the details are set up, but IP-based devices are pulled in very quickly. 

In terms of time to set up and maintain Auvik, it's about the same as other tools. It's all about the underlying network configuration. It didn't take much time because I ensured the network was prepped for any potential security monitoring tools we put in place. I didn't have to go in on the back end and set anything up because it was all waiting to go.

The solution requires a little maintenance on the VM side. Performance-wise CPU and RAM maintenance can increase performance. Other than that, the tool essentially runs itself. 

I can't speak to the cost; I'm an engineer. Auvik has a subscription-based pricing option, and the other solution we evaluated had high upfront costs. 

We evaluated Orion and WhatsUp Gold and found that Auvik works much better for us because it allows us to have all our clients in a single plane of glass under our company. With the other products, we would have to set up separate instances at each site and manage them individually from onsite.

I rate the solution eight out of ten. 

Auvik provides a single integrated platform, though that's not as important to us as cost, ease of use, and support, in which the solution excels. We're intelligent people who work with different platforms, as our clients don't have cookie-cutter set-ups at every location. If Auvik weren't a single integrated platform, that wouldn't be much of a hindrance for us.

We haven't used Auvik's automation capabilities.

Auvik's cloud-based solution works as well or better than on-prem network monitoring solutions. The cloud solution depends upon the internet connection at the opposite end but logging in remotely to manage on-prem tools faces the same challenge.  

It works as well, even better. But of course, your Cloud solution is dependent upon the internet connection at the opposite end, so your mileage may vary. But you're still limited by that with on-prem solutions as well, if you're logging in remotely to look at those tools. So it faces the same challenges as the on-prem solutions.

We use it for our small and medium businesses, specifically for data collection. We also use it for network mapping.

It's super helpful in the sense that you can look at the network and it shows you a graphical representation, so you know exactly how things are connected. It helps us stay more organized and more up-to-speed on what is in our clients' networks.

It helps keep device inventories up to date. The amount of data you get from it, whether it's network maps or the overall client information, helps you to solve tickets. We have two tiers for our tickets and we have a NOC team that assists us as well. That is how we run the business and the simpler tickets can be handled by the junior engineers.

Also, its ability to visualize network mapping and topology works extremely well. It's very comparable to SolarWinds, which is what I used in a previous position.

The whole troubleshooting process is made easier, and automation is part of that troubleshooting. And its automation has made us more available because it's enabling us to cut down on the time that it takes to resolve a help desk ticket.

We have absolutely seen a decrease in MTTR, thanks to the amount of data and the network maps. If an engineer is looking at a particular client location, they're able to ascertain, fairly quickly, where devices are located and how everything is connected. It just makes the whole troubleshooting process much simpler.

The data collection, as a whole, is valuable. 

The reports seem to be really comprehensive as well. There's a lot of information in terms of the make and model of a specific piece of hardware, IP address, subnets that a device is located on, and network map. It's a single, integrated platform and that is very important because the more tools that you can build into one product suite, the easier it is for your engineering staff to learn it.

It's extremely simple to use the monitoring and management functions of Auvik. Anybody with just a general IT background would be able to use it without a problem. This aspect of the solution is extremely important. As we're training new people, it's nice to have tools that are simple to use yet powerful enough to give you insight into your client's network. It would be a great tool for delegating low-level tasks to junior staff because there are so many built-in features and you get so much information out of Auvik.

Nothing really stands out in terms of a lack. If you want to be nit-picky, I don't know that there are any remote tools for directly connecting to workstations through Auvik. If there is, I have not used them, so adding a remote tool would be helpful.

I started with my current company about three months ago and that's how long I've had experience in Auvik.

It's extremely stable. I haven't had any issues at all. It seems rock-solid.

We have it deployed across at least 30 clients' systems, so it's definitely a scalable solution.

I have not had to call technical support yet because the product is fairly simple and straightforward.

The ROI would be high. Although I don't handle any of the billing our company receives, from a technical aspect, there is a lot of value from Auvik. I couldn't tell you how long it took to implement because I wasn't around for that, but the usefulness that I get out of Auvik is obvious.

I don't know what we pay for Auvik. But whatever the price is, it's worth it because we're getting a lot of value from it for that price.

In terms of technical insight, if you're looking for good insight into your client's environment, Auvik is a great solution.

Auvik has definitely impressed me. It seems like it's very lightweight, yet it gives you a lot of features.

Auvik is our monitoring solution; we're an MSP, so we use it to monitor multiple medium-sized enterprise clients. It's primarily used by the network team, though other teams log on occasionally. We have five users in our company. 

Auvik helps us manage our clients better, and it's all from one web page, so we can switch between clients easily without having to log into different systems. We can also remotely access their networks, which is handy. 

We previously used multiple solutions for managing our networks and switching to Auvik resulted in time savings of approximately 20%.  

Auvik increased our IT team's availability, especially as we can look into issues remotely and from our phones if we're away from a PC. All our teammates can log into a webpage instead of installing applications on their computers, which is nice from an availability point of view. We have seen time savings in the area of 10%. 

The solution helps us delegate low-level tasks to junior staff; we send alerts to our NOC team, and they help triage some of the lower-level ones. If they can't resolve it, they escalate it to us. The delegation capability is essential, as it saves us a lot of time.   

Auvik helps keep device inventories up-to-date; we can set it to scan the network, and the information updates automatically. It saves about 30% of our time.

The solution keeping device inventories up-to-date helps our teams focus on high-value tasks and delegate low-level tasks to junior staff.   

The best features are the alerting and monitoring. 

Using Auvik, we can remotely access our clients' devices or networks, which is an excellent feature.

The solution also allows us to do backups, check usage, and do SNMP polling for device statistics all in one pane of glass, which is nice.

Auvik's monitoring and managing functions are easy to use, especially as I did some webinars. We need the service, so ease of use is critical.  

Auvik provides a single integrated platform. 

Auvik provides a basic network map, and as long as everything is working correctly, it draws a little topology table, which is a nice feature. 

Auvik helps to reduce repetitive, low-priority tasks through automation, primarily our backups, as that's a repetitive task. From a backup point of view, the solution handles everything, and we only need to verify once in a while, so we have time savings of 90% in this area.   

I want to see improvement around backups; we had a case where we created a ticket for online support, and they were able to set up backups for one of our devices, but they were unwilling to do the same backup script with a different device. The script uses the same code, just a different model number, and the engineers weren't willing to add it to the other model.

We've been using Auvik for about a year. 

Auvik is a stable platform. 

Auvik is scalable, though we have one client with many devices, and it can sometimes be slow to load some of the data.

The technical support is excellent; I've logged several tickets with them, and they always resolved my issues.

Positive

The company previously used an in-house system, but that was before my time. Auvik has been in place since my arrival. 

I wasn't involved in the deployment, and the product doesn't require any maintenance on our end, as Auvik Networks Inc. handles that in the cloud. 

I don't have any insight into the cost, as another department handles that.

I rate the solution eight out of ten. 

To someone comparing network monitoring solutions but concerned about pricing, I'd say Auvik is a good solution, and I recommend it.

Comparing Auvik's cloud-based solution versus on-prem network monitoring solutions, cloud-based is more straightforward and always available, so I prefer it over an on-prem tool.   

Our visibility into remote and distributed networks is about the same as before.

I advise anyone evaluating Auvik to try their POC, as it's straightforward to install and get working.

As an IT company, we rely on Auvik, a network monitoring tool, to support our many clients. We install an Auvik agent on their networks, which then provides real-time monitoring. This allows us to be alerted of any issues, like a downed server, so we can promptly investigate and resolve the problem.

The interface is straightforward.

After familiarizing myself with Auvik, I could see the many benefits it offered.

Auvik empowered our entry-level technicians to resolve more tickets independently. It complements our existing internal monitoring tool. While the existing tool might initially flag issues like a server outage, Auvik provides additional insights for our technicians, helping them verify the information and identify potential false positives. This allows them to tackle problems more effectively without needing to escalate to senior staff.

Auvik allows us to spend less time on setup, maintenance, and issue resolution.

The most valuable feature is the alerting system. This ensures we're notified immediately of critical events, such as a server failure, allowing for a swift response and minimizing downtime.

I find the network map confusing and believe it could be improved by simplifying its layout or using clearer visuals.

The quality of technical support varies greatly. Some representatives are very helpful, while others are less so.

I have been using Auvik Network Management for three years.

There have been one or two instances where the Auvik website or portal seemed to be unavailable, but the actual appliances themselves seemed to be functioning normally. Overall, Auvik has been stable.

Auvik Network Management is scalable.

The technical support experience can be inconsistent. Sometimes we connect with fantastic technicians who solve our problems quickly. The customer service representatives are always friendly and supportive. However, occasionally we encounter technicians who suggest basic troubleshooting steps I've already attempted, like restarting or pinging. In these situations, I prefer immediate escalation. Thankfully, the escalation process through chat is usually swift, and the escalated representatives are very effective.

Neutral

While the initial deployment is straightforward, the overall deployment time will vary depending on our chosen option. On Windows machines, the process takes just five minutes, while Linux machines require approximately 20 minutes.

I start with a pre-configured Auvik collector packaged as an OVA file. I upload this file to VMware to deploy the collector. Once deployed, I SSH into the Linux machine and execute the necessary commands to update its firmware to the latest version. This completes the deployment process.

The implementation is completed in-house.

I would rate Auvik Network Management eight out of ten.

No maintenance is required.

I recommend spending some time familiarizing yourself with the portal. Once you're inside, you'll find it to be quite intuitive.

We are a small MSP and we use Auvik Network Management to monitor the networks of our clients.

The network map is essential – without it, we'd be lost quickly. Fortunately, it provides us with a convenient and near real-time view of the system, allowing for optimal monitoring.

The Auvik network map offers complete visibility of all devices where we have established credentials.

We started to see the benefits of Auvik as soon as we added an Auvik specialist to our team.

Auvik has helped reduce our mean time to resolution. It is now almost immediate. When a cluster goes down, we receive an alert almost immediately.

The most valuable feature of Auvik is the comprehensive network management it provides. While we initially had someone install it for our client, it wasn't set up correctly. Thankfully, our new Auvik specialist came in, cleaned everything up, and configured it properly. Now, we have clear visibility into our network, including breakdowns of VLANs, device locations, and communication paths. We even discovered a built-in GUI traceroute tool that helps us pinpoint network bottlenecks with ease.

The interface could be more user-friendly for getting to our clients. While the overall experience is positive, there's room for improvement. The main client pages load slowly, but interestingly, navigating through drop-down menus before reaching the main page is faster. Scheduling maintenance would be much easier if there was a dedicated section readily visible on each client's main page.

I have been using Auvik Network Management for one and a half years.

Auvik Network Management is stable.

Auvik Network Management is scalable.

We transitioned from SolarWinds Orion to Auvik Network Management due to its wider range of features. Beyond core functionalities, Auvik provides backup and restore options for configurations, and to our delight, we recently discovered the ability to remotely manage firewalls directly through the platform, eliminating the need for on-site VPN access.

I would rate Auvik Network Management eight out of ten.

We maintain the server we host Auvik on.

I recommend Auvik Network Management. Once you get to know the solution, you'll be able to utilize its full potential.