PRTG Network Monitor Reviews

PRTG Network Monitor is used for monitoring internet service providers, and we want to receive the downtime of the network devices mapped. PRTG Network Monitor is hosted in a local host server in our three data centers.

The most valuable features of PRTG Network Monitor are user-friendly, and the graphical interface is good for all the network devices that are mapped in this organization. It's very easy to find reports for any devices that we are looking for.

PRTG Network Monitor can improve the reports. In the reports, you have to give an alert for that SMS and email, the emergency calls and downtimes have to be reported accordingly. You have to enable email services or an SMS gateway service to receive more alerts at the proper time.

I have been using PRTG Network Monitor for approximately four years.

PRTG Network Monitor is stable.

We have approximately 3,000 users using PRTG Network Monitor in our organization.

I have not used the support from PRTG Network Monitor.

The setup of PRTG Network Monitor is simple. The deployment can be done in a few hours.

We pay for PRTG Network Monitor annually. The price is approximately 10,000 rupees annually.

The solution performs well.

I rate PRTG Network Monitor an eight out of ten.

The most valuable features of PRTG Network Monitor are bandwidth utilization, user-friendliness, all past report simple retrievals, and timeout features. Additionally, if the solution does go down it is simple to bring it back.

PRTG Network Monitor could improve by having descriptions for the tab usages. The dashboards or interface could be easier to understand.

I have been using PRTG Network Monitor for approximately two and a half years.

PRTG Network Monitor is scalable.

We have approximately 200 to 250 devices that are being used with PRTG Network Monitor.

We used other solutions previously but they did not compare in features with that of PRTG Network Monitor.

The setup of PRTG Network Monitor is simple. There are five or six steps to complete it. 

We have more than two locations and for that two locations' network connectivities, we are using PRTG Network Monitor. For example, we monitor firewalls, switches, and for ISPs. For servers, we are using the Zabbix.

One person is monitoring everything using PRTG Network Monitor. We have been providing support to our customers.

We are using the premium version of PRTG Network Monitor. The price of the solution is a bit higher than competitors but it is worth the extra money. However, it would be helpful if the price was lower.

I have compared other tools to PRTG Network Monitor. I found that PRTG Network Monitor is more user-friendly than the others I compared.

I rate PRTG Network Monitor a seven out of ten.

PRTG Network Monitor is used by network monitoring teams for keeping a tab on services that are down. Once you are aware of a failure you are able to quickly reinstate the service before customers or brand users notice. This can be done even before the service is down, if you see a pattern of service degradation, it can quickly attend to it.

The most valuable feature of PRTG Network Monitor is the different monitoring probes available.

PRTG Network Monitor could improve the price.

I have been using PRTG Network Monitor for approximately three years.

PRTG Network Monitor is stable.

We have two clients that are using PRTG Network Monitor.

The technical support from PRTG Network Monitor has been good.

I rate the licensing for PRTG Network Monitor an eight out of ten.

I rate PRTG Network Monitor an eight out of ten.

We use PRTG network monitoring to monitor our server, especially for computing resources. 

What I've found most valuable is the custom sensor, which allows you to write scripts or code to monitor a specific metric in your environment.

PRTG's application monitoring sensor is not strong and could be improved, and I've also had some issues with it crashing during upgrades. In the next release, I would like to see the ability to monitor connections between services.

I've been using this solution for more than a year.

The platform is stable - other than the issues with upgrading, we haven't encountered any problems with it.

I think the platform is relatively scalable - we added two additional probes, and everything has worked fine without any issues.

The technical support team is very responsive.

The initial setup was relatively easy.

Adding extra sensors will incur an additional cost.

I evaluated Centron, which is more flexible and customizable, but I think that PRTG is easier to administer. The initial setup with PRTG is also easier than with other solutions at the same level.

PRTG is very good for basic monitoring of computer resources and usage. However, if you have relatively complex environments, you may need a different product. I would give this solution a rating of six out of ten.

We are a service provider in the IT industry, and this is one of the products that we implement for our clients. We are using this product ourselves, and we have several customers who are also using it.

It is basically used for monitoring alerts, such as memory from a server has gone down.

Network Discovery is a feature that our customers like a lot.

The ability to maintain the health of the network is very good.

The user interface is okay.

This is a very lightweight solution.

The technical support could respond a little bit quicker.

A better console would be an improvement.

I have been working with PRTG Network Monitor for approximately five years.

The stability is excellent.

The networks in Guatemala are not very large, so scalability has not been an issue for us.

Our clients are typically medium-sized businesses.

We are working towards increasing the number of deployments.

I would rate the technical support and eight out of ten. They could be a little better in terms of response speed. Usually, they respond the next day.

The initial setup is straightforward and very simple. The length of time required for deployment depends on the size of the network but usually, we're talking about two hours.

We provide technical support to our customers who are using this product.

On average, two people are required for deployment and maintenance.

The pricing is okay and it is cheaper than some competing products.

The other product that our customers normally consider is SolarWinds.

SolarWinds is a more robust solution, and as such, it is much more expensive than PRTG. Most of the time, based on budget, our customers choose PRTG.

For me, this is a nice solution and I would rate it an eight out of ten.

We are mostly using PRTG Network Monitor for monitoring servers, and switches. For example, we monitor uptime on critical resources.

The solution has benefited our organization by showing us when devices are up and when you are down, and we can do an analysis on the availability of the resources.

The most valuable feature of PRTG Network Monitor is the dashboards. We can check to see the resources and the uptime.

PRTG Network Monitor can improve by adding prevention and detection features.

I have been using PRTG Network Monitor for approximately two years.

The stability of the PRTG Network Monitor is good.

PRTG Network Monitor is scalable. You can also deploy it on Linux and Windows. We have approximately 350 people using this solution in my company.

We are an IT company that deploys this solution on more than one site.

We have been using OP Network Manager in parallel with PRTG Network Monitor.

The initial setup of PRTG Network Monitor was easy. The implementation took approximately a couple of hours.

The implementation of PRTG Network Monitor was done in-house. The deployment can be done by one person.

The price of PRTG Network Monitor is more expensive than other solutions, such as OP Network Manager.

We are not using all the features available in the solution.

We have three technical support people who manage the solution.

I would recommend this solution to others.

I rate PRTG Network Monitor an eight out of ten.

We use it to monitor our network because we have a central site that connects to many remote sites, and we have primary and alternative links. We need to monitor both links for each site to be able to react when it is necessary in case of failure. It is beneficial for us to check the connectivity and bandwidth used in a particular channel.

There are good tools for monitoring purposes. 

There are some restrictions for usage and sales that need to be ironed out for the country of Congo. I would like the ability to monitor Cisco IRS devices.

I have been using PRTG Network Monitor for the past twenty-two years.

PRTG Network Monitor is a very stable product.

PRTG Network Monitor is a scalable product even though there are currently restrictions in our country.

The initial setup is straightforward and easy to deploy.

We deployed PRTG Network Monitor through our own in-house team.

I would rate PRTG Network Monitor a nine out of ten.

We use PRTG Network Monitor for network monitoring. We mainly monitor uptime on our switches and our network environment, and we're looking at expanding into server monitoring as well.

The Slack integration is fantastic, and I've actually found it to be very useful recently.

Integration into service management ticketing systems could be better. They should simplify the integration into big service management platforms like ServiceNow, Remedy, and Cherwell. 

They're really into monitoring, but they don't do any self-resolution. It would be better if the company moved more into the AIOps space so that you could actually kick off some remedies. I know that you can execute some commands from the tool, but you need to develop those all yourself. It would be really handy if they had some auto-remedy scripts that they could develop on top.

I have been using PRTG Network Monitor for nearly ten years.

PRTG Network Monitor is very stable. 

PRTG Network Monitor is very easy to scale.

The technical support was really good because I did get answers for what I was trying to do. They're very good.

When we first built it, it was very simple, but we completely rebuilt our PRTG about four years ago with the help of an external partner. It took us about one or two months to deploy this solution.

We don't perform any maintenance as such. Just every now and then, we update to the latest version to keep it fresh. We're always interested in making sure that our environment is as secure as possible. That's why we always put in the latest code.

We implemented this solution with the help of an external partner. Our experience with the external partner was good.

The price is actually on the cheaper side. If you're going with the unlimited license code, it's very cheap compared to competitors unless you're going for something free, like Zabbix. But you get what you pay for, and it doesn't have the full suite of products or tools like SolarWinds or a ScienceLogic.

If someone were looking for a basic monitoring tool for servers and networks, I would recommend PRTG Network Monitor. If they're looking at the whole stack and potentially integrating with an ITSM platform or looking at it for something like CMDB correction as well, there are other tools that I would actually recommend. I would recommend something like ScienceLogic if they were looking for full-stack integration with ITSM, CMDB, monitoring, and auto resolution.

On a scale from one to ten, I would give PRTG Network Monitor an eight.