We performed a comparison between AirCheck G3 and OneTouch AT Network Assistant based on real PeerSpot user reviews.
Find out what your peers are saying about NetAlly, Auvik, Wireshark and others in Network Troubleshooting."The one-button AutoTest feature is an amazing tool. It works well. It tells you whether or not you have shorts in your network, your PoE+ is running low on voltage, and shows you your link speed."
"It is portable. It is rugged. It comes with a nice case. It has been dropped, but it doesn't break. I don't have a crack screen or anything like that. It has pretty good battery life."
"AirCheck G2 gives me an overview of which channels are used by the access points or who delivers the Wi-Fi, which gives me a clear picture of what's going on."
"I like the cloud functionality. That's very useful because somebody can go onsite, someone who is not really skilled, and I can see the test results from the office."
"It is a pretty rock-solid device that is well-built."
"AirCheck has a feature that lets you play a tone so you can track down a rogue AP based on the RF signal. That's a cool feature. It can also help you identify interference like microwave ovens or Bluetooth devices. I also like the ability to link it to your online account. It sends a report via email and saves it on the cloud."
"The solution saves us a factor of 10 in time. If a typical WiFI ticket would cost me two hours with AirCheck, then it would cost me 20 hours without it. At 20 hours, you start to refuse to do tickets because it is just too expensive."
"AirCheck made a lot of children and caregivers quite happy. While I might not have resolved everything, I have reduced the problems that we had every night. During the day, they would do visible checks and not always rely on the monitors, but every night, they had at least three or four of those alarms. I was able to reduce it to once or twice a week since those appliances are still limited in their wireless capability."
"OneTouch is easy to set up. You just plug it in, enter your details, and off you go. It only takes a few minutes as long as you've got Link-Live access or network access."
"NetAlly has been behind the curve on visualization, Wi-Fi design, and heat maps for a little while now. They're perfectly aware of this deficiency, but what they offer is good enough for a lot of people. It's not suitable for larger shops, but it works in a pinch. The AirMapper and subsequent AirMagnet integration is an afterthought."
"I would like them to modify the interface. The button to change profiles is fairly small. When you have interventions, it is not always possible to have a ballpoint pen or perfect precision touch with it, since sometimes you need to touch it quite a lot when your hands are very dirty. I would like a special pen that is compatible with that responsive screen. That would make it easier."
"The biggest improvement would be an easier upload over wireless to Link-Live. Currently, the device has to be patched into the Ethernet. The wireless upload has been giving us some issues."
"I would love to have a button that pretends that you're an iPhone 5 or an Android Samsung, then tell me what you think the experience is. This is a very difficult thing to do because each of these things has different radios in them and behaves differently. Now, I can go into the user's office, and say, "The tool says everything's green. The WiFI infrastructure is fine, but their iPhone experience sucks." Is it a problem with their particular iPhone or is it a problem with any iPhone model? If I could have this solution emulate an iPhone model so I can walk into that room, and say, "My tools pretending to be your iPhone and it works fine. It must be your particular iPhone that we have a problem with." I found mobile phones in general have lousy radios and the coverage isn't strong enough, but it would be a nice feature."
"The only thing that would be an improvement would be the ability to do MPO/MPT testing, which is another mode of fiber, along with more options on the SFP to do that testing."
"It was hard to determine which AP was which because it only shows the MAC address. It'll also display the MAC address of the BSSID, so it looked like I had 12 APs in my house. If I have three access points and each is a dual-band with an SSID or BSSID for each radio, it comes out to about 12 APs. That's one of the bugs fixed in the latest firmware update, but it's only available if you have a NetAlly support contract."
"The solution doesn't have much functional information online."
"A feature I would like to see is the ability to charge the device via a PoE outlet. Usually, I need to charge it at home. It would be good to leave the device plugged in and charging at a PoE source at the customer site after a quick look at the network when I have moved on to other tasks."
"It is also limited in the number of IP targets you can test. If you want to test how many hops or different sites, you should be able to hit a test button and say, "Right then, test these 20 IP addresses to see if I can reach them." It only does up to 10. Most of NetAlly's other devices, like the G2, can do unlimited addresses."
AirCheck G3 is ranked 5th in Network Troubleshooting with 13 reviews while OneTouch AT Network Assistant is ranked 12th in Network Troubleshooting with 6 reviews. AirCheck G3 is rated 8.6, while OneTouch AT Network Assistant is rated 9.0. The top reviewer of AirCheck G3 writes "A portable, rugged device that reduces resolution time and saves thousands of dollars". On the other hand, the top reviewer of OneTouch AT Network Assistant writes "It's a simple entry-level tool that's easy to set up, but it has some limitations on speed and IP targets". AirCheck G3 is most compared with LinkRunner, AirMagnet Survey, iTrinegy NE-ONE Network Emulator and NetAlly EtherScope nXG, whereas OneTouch AT Network Assistant is most compared with LinkRunner.
See our list of best Network Troubleshooting vendors.
We monitor all Network Troubleshooting reviews to prevent fraudulent reviews and keep review quality high. We do not post reviews by company employees or direct competitors. We validate each review for authenticity via cross-reference with LinkedIn, and personal follow-up with the reviewer when necessary.