We performed a comparison between AirCheck G3 and Wireshark based on real PeerSpot user reviews.
Find out in this report how the two Network Troubleshooting solutions compare in terms of features, pricing, service and support, easy of deployment, and ROI."The auto-test, channel scanner, packet capture, and Link-Live integration are all crucial features we use regularly. The wired cable tester is also indispensable. We frequently run into problems during cable testing that are hard to pin down. When tracking down a cable problem, you usually need to plug something into the cable and ensure the cable plant is reliable."
"It is a pretty rock-solid device that is well-built."
"The solution saves us a factor of 10 in time. If a typical WiFI ticket would cost me two hours with AirCheck, then it would cost me 20 hours without it. At 20 hours, you start to refuse to do tickets because it is just too expensive."
"It is portable. It is rugged. It comes with a nice case. It has been dropped, but it doesn't break. I don't have a crack screen or anything like that. It has pretty good battery life."
"The one-button AutoTest feature is an amazing tool. It works well. It tells you whether or not you have shorts in your network, your PoE+ is running low on voltage, and shows you your link speed."
"The information provided by the solution for resolving connectivity and performance problems is very thorough. The reporting functionality is extremely good as I can pass that information on with little input. The device will identify issues and problems, e.g., the diagnostic material. When you have Internet access, it sends the information to your email address, which is very useful."
"I like the cloud functionality. That's very useful because somebody can go onsite, someone who is not really skilled, and I can see the test results from the office."
"AirCheck has a feature that lets you play a tone so you can track down a rogue AP based on the RF signal. That's a cool feature. It can also help you identify interference like microwave ovens or Bluetooth devices. I also like the ability to link it to your online account. It sends a report via email and saves it on the cloud."
"It has good basic features."
"Packet-capture files can be hard to use due to their size. Wireshark has a tool called tshark that can parse the files with out opening them so that you can take large captures, say 2-10GB, and return only relevant information."
"Wireshark has a lot of features. It's a powerful tool if you're familiar with it. You can see everything on the network with it."
"Wireshark is a good tool to start with network analyzing and packet capturing."
"It is a stable product. I would rate the stability a ten out of ten."
"The best part about Wireshark, in my opinion, is its ability to analyze packet capture files."
"Wireshark is very user-friendly; even someone with basic IT knowledge can use it."
"Setup is very easy. It's also possible to change source code and compile if you want to change something in the code, because it's free."
"I would love to have a button that pretends that you're an iPhone 5 or an Android Samsung, then tell me what you think the experience is. This is a very difficult thing to do because each of these things has different radios in them and behaves differently. Now, I can go into the user's office, and say, "The tool says everything's green. The WiFI infrastructure is fine, but their iPhone experience sucks." Is it a problem with their particular iPhone or is it a problem with any iPhone model? If I could have this solution emulate an iPhone model so I can walk into that room, and say, "My tools pretending to be your iPhone and it works fine. It must be your particular iPhone that we have a problem with." I found mobile phones in general have lousy radios and the coverage isn't strong enough, but it would be a nice feature."
"The biggest improvement would be an easier upload over wireless to Link-Live. Currently, the device has to be patched into the Ethernet. The wireless upload has been giving us some issues."
"A feature I would like to see is the ability to charge the device via a PoE outlet. Usually, I need to charge it at home. It would be good to leave the device plugged in and charging at a PoE source at the customer site after a quick look at the network when I have moved on to other tasks."
"NetAlly has been behind the curve on visualization, Wi-Fi design, and heat maps for a little while now. They're perfectly aware of this deficiency, but what they offer is good enough for a lot of people. It's not suitable for larger shops, but it works in a pinch. The AirMapper and subsequent AirMagnet integration is an afterthought."
"The solution doesn't have much functional information online."
"It would be nice if I could import an AP list with a MAC address. When it looks at access points, it should tell me the AP name instead of the MAC address. When you get a MAC address, you could eventually find out where you want to go. However, a lot of times, if I just have an AP name, I know that's in this area or that's over there. I would like that function because AirMagnet, which is the precursor of this, had that ability where you could basically import a list of APs and MAC addresses, and then it could display those instead of just a MAC address."
"It was hard to determine which AP was which because it only shows the MAC address. It'll also display the MAC address of the BSSID, so it looked like I had 12 APs in my house. If I have three access points and each is a dual-band with an SSID or BSSID for each radio, it comes out to about 12 APs. That's one of the bugs fixed in the latest firmware update, but it's only available if you have a NetAlly support contract."
"I would like them to modify the interface. The button to change profiles is fairly small. When you have interventions, it is not always possible to have a ballpoint pen or perfect precision touch with it, since sometimes you need to touch it quite a lot when your hands are very dirty. I would like a special pen that is compatible with that responsive screen. That would make it easier."
"The product has been using the same GUI for many years."
"The Wireshark search function shows green for a correct search and red for an incorrect search. If there were a way to provide a description about what a search - and the similar ones which are available - can do, while a person is typing it, it would make the product easier to use and simultaneously decrease the learning curve."
"The only thing that I don't like is sometimes there is an update, and something that I was using is either no longer there or it has changed."
"Wireshark is similar to an OS defense tool, meaning that it runs on an OS such as Ubuntu and Fedora, but I'm unsure if it's compatible with Windows or if it's a straightforward process to run it on Windows. Right now, my team needs to run Wireshark from a dongle to use it, so it's an OS-dependable tool, and that's an area for improvement. I was unable to use Wireshark on Windows, and I couldn't capture it, as I'm unsure how to configure the wireless card into monitoring mode on Windows. The process was straightforward on Linux, but it wasn't the case on Windows OS. It seems Wireshark isn't compatible with all OS. For example, you can analyze the log, and you can analyze it on the Windows server, but you can't do a capture in Windows. Configuring Wireshark for Windows isn't as easy as configuring it for Linux."
"Wireshark could be improved by adding more monitoring features."
"With Wireshark, you cannot download and utilize the packet in automation."
"You need some basic knowledge to work with Wireshark. Maybe it could be more user-friendly just for new users. Just for the new generation."
"In the future, it would be nice to see color coding. It is just black and white."
AirCheck G3 is ranked 5th in Network Troubleshooting with 13 reviews while Wireshark is ranked 3rd in Network Troubleshooting with 61 reviews. AirCheck G3 is rated 8.6, while Wireshark is rated 9.0. The top reviewer of AirCheck G3 writes "A portable, rugged device that reduces resolution time and saves thousands of dollars". On the other hand, the top reviewer of Wireshark writes "User-friendly with an easy setup and a nice interface". AirCheck G3 is most compared with LinkRunner, AirMagnet Survey, iTrinegy NE-ONE Network Emulator and NetAlly EtherScope nXG, whereas Wireshark is most compared with Zabbix, Nagios XI, SolarWinds NPM, ClearSight Analyzer and Microsoft Network Monitor. See our AirCheck G3 vs. Wireshark report.
See our list of best Network Troubleshooting vendors.
We monitor all Network Troubleshooting reviews to prevent fraudulent reviews and keep review quality high. We do not post reviews by company employees or direct competitors. We validate each review for authenticity via cross-reference with LinkedIn, and personal follow-up with the reviewer when necessary.
