We performed a comparison between AirCheck G3 and OneTouch AT Network Assistant based on real PeerSpot user reviews.
Find out what your peers are saying about NetAlly, Wireshark, Auvik and others in Network Troubleshooting."I also like the remote session and the ability to log in to the device remotely. You can log in to the tester with your computer and can see the screen and operate the tester remotely. This is a very cool function, but it's very advanced."
"The ability to push data to Link-Live is really important. On the main screen, you can see all the system parameters, and then you can also go and see all the current systems that are operating. They all have different SSIDs or system identifiers, and you can see all SSIDs that are operating in a certain area. Being able to see that and being able to dive into each one and figure out what frequency it is operating under is valuable."
"The solution saves us a factor of 10 in time. If a typical WiFI ticket would cost me two hours with AirCheck, then it would cost me 20 hours without it. At 20 hours, you start to refuse to do tickets because it is just too expensive."
"AirCheck made a lot of children and caregivers quite happy. While I might not have resolved everything, I have reduced the problems that we had every night. During the day, they would do visible checks and not always rely on the monitors, but every night, they had at least three or four of those alarms. I was able to reduce it to once or twice a week since those appliances are still limited in their wireless capability."
"The airCheck is the real-time spectrum analyzer to see clients that could be connecting to our network, not just rogue networks out there, but rogue clients and other interference in that particular spectrum."
"It is a pretty rock-solid device that is well-built."
"AirCheck has a feature that lets you play a tone so you can track down a rogue AP based on the RF signal. That's a cool feature. It can also help you identify interference like microwave ovens or Bluetooth devices. I also like the ability to link it to your online account. It sends a report via email and saves it on the cloud."
"It has made our networking staff more productive. We spend less time because the device helps us by identifying the issue and providing a solution for the customer. Prior to not having this device, we would have to guess when an issue arose. Now, we don't have to guess. This can easily save us hours per call."
"OneTouch is easy to set up. You just plug it in, enter your details, and off you go. It only takes a few minutes as long as you've got Link-Live access or network access."
"I would like them to modify the interface. The button to change profiles is fairly small. When you have interventions, it is not always possible to have a ballpoint pen or perfect precision touch with it, since sometimes you need to touch it quite a lot when your hands are very dirty. I would like a special pen that is compatible with that responsive screen. That would make it easier."
"If it was capable of downloading MIBs onto the device, then we could identify the manufacturer. Sometimes, when I am troubleshooting, there is a Mac address. For example, there is a rogue device and it just gives us a Mac address, which is fine. It gives us something, which is better than nothing. It would be nice if it was able to download a MIB where we could associate it with that Mac address and the manufacturer."
"I would love to have a button that pretends that you're an iPhone 5 or an Android Samsung, then tell me what you think the experience is. This is a very difficult thing to do because each of these things has different radios in them and behaves differently. Now, I can go into the user's office, and say, "The tool says everything's green. The WiFI infrastructure is fine, but their iPhone experience sucks." Is it a problem with their particular iPhone or is it a problem with any iPhone model? If I could have this solution emulate an iPhone model so I can walk into that room, and say, "My tools pretending to be your iPhone and it works fine. It must be your particular iPhone that we have a problem with." I found mobile phones in general have lousy radios and the coverage isn't strong enough, but it would be a nice feature."
"It would be nice if I could import an AP list with a MAC address. When it looks at access points, it should tell me the AP name instead of the MAC address. When you get a MAC address, you could eventually find out where you want to go. However, a lot of times, if I just have an AP name, I know that's in this area or that's over there. I would like that function because AirMagnet, which is the precursor of this, had that ability where you could basically import a list of APs and MAC addresses, and then it could display those instead of just a MAC address."
"The biggest improvement would be an easier upload over wireless to Link-Live. Currently, the device has to be patched into the Ethernet. The wireless upload has been giving us some issues."
"NetAlly has been behind the curve on visualization, Wi-Fi design, and heat maps for a little while now. They're perfectly aware of this deficiency, but what they offer is good enough for a lot of people. It's not suitable for larger shops, but it works in a pinch. The AirMapper and subsequent AirMagnet integration is an afterthought."
"We use these out in the field, and because they're not allowed on our network, we usually have to have the person take them home and provide backhaul to them. In other words, they are not allowed through our firewalls to dump the data. So, we have to have them go to a separate wired network to dump the data. There could be an option to put an LTE and have a phone engine in it so that you can buy a SIM card for it and have it use cellular to download the data. That is something that would be nice to have. That's a little kink in this system right now. Other than using the Ethernet port to download data, it'd be nice if we could use either LTE or some other way to get the data that was collected by AirCheck G2 to our Link-Live portal."
"The solution doesn't have much functional information online."
"It is also limited in the number of IP targets you can test. If you want to test how many hops or different sites, you should be able to hit a test button and say, "Right then, test these 20 IP addresses to see if I can reach them." It only does up to 10. Most of NetAlly's other devices, like the G2, can do unlimited addresses."
AirCheck G3 is ranked 5th in Network Troubleshooting with 13 reviews while OneTouch AT Network Assistant is ranked 12th in Network Troubleshooting with 6 reviews. AirCheck G3 is rated 8.6, while OneTouch AT Network Assistant is rated 9.0. The top reviewer of AirCheck G3 writes "A portable, rugged device that reduces resolution time and saves thousands of dollars". On the other hand, the top reviewer of OneTouch AT Network Assistant writes "It's a simple entry-level tool that's easy to set up, but it has some limitations on speed and IP targets". AirCheck G3 is most compared with LinkRunner, AirMagnet Survey, iTrinegy NE-ONE Network Emulator and NetAlly EtherScope nXG, whereas OneTouch AT Network Assistant is most compared with LinkRunner.
See our list of best Network Troubleshooting vendors.
We monitor all Network Troubleshooting reviews to prevent fraudulent reviews and keep review quality high. We do not post reviews by company employees or direct competitors. We validate each review for authenticity via cross-reference with LinkedIn, and personal follow-up with the reviewer when necessary.