Compare ManageEngine NetFlow Analyzer vs. NetAlly EtherScope nXG

Cancel
You must select at least 2 products to compare!
Most Helpful Review
Find out what your peers are saying about Broadcom, Wireshark, NetAlly and others in Network Troubleshooting. Updated: June 2021.
512,221 professionals have used our research since 2012.
Quotes From Members

We asked business professionals to review the solutions they use. Here are some excerpts of what they said:

Pricing and Cost Advice
"Compared to other products, Auvik's pricing is more feasible since you get all its features. You pay for licenses on a per network device basis. It monitors hypervisors, but does not bill for that. There are no additional costs, which is something that I like.""The pricing is fair for the value and time saved that you get out of it. The larger you go, the more sense it makes per device, because as you hit different pricing tiers, it becomes much more affordable per device.""Its pricing is a little on the high end. There are no costs in addition to the standard licensing fees. It is more expensive than other solutions, but their per-device model is very fair. Anything other than the networking gear is monitored by Auvik at no charge.""The value is there. It's not that expensive per device and it's licensed per device. Unlike some of the other tools that I use, it's not real expensive. It's a good value for the price.""It's great for small businesses, but when you start reviewing the pricing model, depending on how many devices, and what sub-devices you decide to pull in, it can get tricky as far as the pricing goes.""As an individual IP company, Auvik is a little bit pricey. It is a little expensive, but as an MSP owner, I have a small side business. So, I'm an Auvik customer in that sense too. In that, I think it's reasonable to pay $10 to $15 a device or less depending on the endpoint. For the amount of capability that it has, it is very reasonably priced."

More Auvik Pricing and Cost Advice »

Information Not Available
"I don't consider the pricing to be a problem. It's not a cheap device, but it's a very capable device for the money. It's a good value.""If you're in the networking world, this product makes great sense very quickly, if you're going to use it more than a few times a week... If you are just looking at a handheld device unit for specific, wireless or wired testing and not much else, the cost may be a little more prohibitive than what you have in your budget.""The stuff is expensive. I really do wish the price would come down. I don't really call support. I haven't had a problem. But it's really expensive and every year I have to pay them a ton of money. I don't want to make up reasons to justify that cost, but I'm not using the support.""The cost is not cheap but it totally pays for itself because it can do so much.""For the average network shop, the cost is a bit high. In a lot of organizations, people don't share test devices between teams. Generally, you need a device for the network team and a device for the system team, the security team, etc. While the cost is a little on the high side, that is offset by the regular updates and continued improvements that NetAlly adds to the device. Those improvements continue to increase the perceived value of the device.""It's a pricey device, but I see value in it from a business perspective.""We paid for the additional maintenance on it (for an extra year) to get that extra coverage. This was the first time that we had this solution in-house, and it was pretty pricey. So, we wanted to make sure that anything went wrong, then we could get it repaired.""It's very expensive. I wish I could buy a few more and give them to all the people who could use it, or perhaps send it to a client, given that some of its features are easy to use. But sending something worth $8,000 or $9,000 is nerve-racking. It would be nice that if it were a lot less expensive."

More NetAlly EtherScope nXG Pricing and Cost Advice »

report
Use our free recommendation engine to learn which Network Troubleshooting solutions are best for your needs.
512,221 professionals have used our research since 2012.
Questions from the Community
Top Answer: One of the best things about Auvik, and it's why it's one of my go-to products, are the remote access capabilities… more »
Top Answer: The pricing is fair for the value and time saved that you get out of it. The larger you go, the more sense it makes per… more »
Top Answer: The logging features could be a little bit better polished, although that aspect is relatively new. It comes in as raw… more »
Ask a question

Earn 20 points

Top Answer: The most valuable features are the WiFi troubleshooting, network validation, and cabling validation, and the fact that… more »
Top Answer: It's very expensive. I wish I could buy a few more and give them to all the people who could use it, or perhaps send it… more »
Top Answer: For troubleshooting, the pre-programmed AutoTest feature is not as intuitive as it could be because there are different… more »
Popular Comparisons
Also Known As
EtherScope nXG, EtherScope, netAlly EtherScope
Learn More
Overview

Auvik is cloud-based software that simplifies and automates network monitoring and management to give you complete network visibility and control.

Designed to deploy in minutes, you’ll resolve problems faster than ever with real-time network mapping and inventory, powerful troubleshooting features, deep network traffic insights, automated config backups and restore, and more. https://www.auvik.com/get-free-trial

ManageEngine NetFlow Analyzer a complete traffic analytics tool, leverages flow technologies to provide real time visibility into the network bandwidth performance. NetFlow Analyzer, primarily a bandwidth monitoring tool, has been optimizing thousands of networks across the World by giving holistic view about their network bandwidth and traffic patterns. NetFlow Analyzer is a unified solution that collects, analyzes and reports about what your network bandwidth is being used for and by whom. NetFlow Analyzer is the trusted partner optimizing the bandwidth usage of over a million interfaces worldwide apart from performing network forensics and network traffic analysis.

Multi-technology, all-in-one handheld network tester that enables engineers and technicians to get more done faster, from deployment to maintenance and documentation of their ever-changing Wi-Fi and Ethernet access networks.

Offer
Learn more about Auvik
Learn more about ManageEngine NetFlow Analyzer
Learn more about NetAlly EtherScope nXG
Sample Customers
Information Not Available
Metro Rail, Micron21, Lotus F1 Team, Elizabeth Board of Education, Queen’s University Belfast, DHL, Praxair, Adventist Health, Wipro Infotech, Tropical Shipping USA
Information Not Available
Top Industries
VISITORS READING REVIEWS
Computer Software Company26%
Comms Service Provider24%
Financial Services Firm8%
Government7%
VISITORS READING REVIEWS
Comms Service Provider31%
Computer Software Company20%
Manufacturing Company6%
Retailer6%
REVIEWERS
Comms Service Provider43%
Computer Software Company14%
Government14%
Manufacturing Company14%
VISITORS READING REVIEWS
Comms Service Provider15%
Venture Capital & Private Equity Firm14%
Non Profit13%
Financial Services Firm12%
Company Size
REVIEWERS
Small Business43%
Midsize Enterprise29%
Large Enterprise29%
No Data Available
REVIEWERS
Small Business25%
Large Enterprise75%
VISITORS READING REVIEWS
Small Business78%
Midsize Enterprise2%
Large Enterprise20%
Find out what your peers are saying about Broadcom, Wireshark, NetAlly and others in Network Troubleshooting. Updated: June 2021.
512,221 professionals have used our research since 2012.

ManageEngine NetFlow Analyzer is ranked 11th in Network Troubleshooting while NetAlly EtherScope nXG is ranked 3rd in Network Troubleshooting with 9 reviews. ManageEngine NetFlow Analyzer is rated 0.0, while NetAlly EtherScope nXG is rated 8.8. On the other hand, the top reviewer of NetAlly EtherScope nXG writes "Does packet capture at line rate gig or 10 gig without dropping a packet". ManageEngine NetFlow Analyzer is most compared with Wireshark, SolarWinds Network Device Monitor, Colasoft Capsa, Darktrace and IBM Tivoli Network Manager, whereas NetAlly EtherScope nXG is most compared with AirCheck, OptiView XG, LinkRunner and OneTouch AT Network Assistant.

See our list of best Network Troubleshooting vendors.

We monitor all Network Troubleshooting reviews to prevent fraudulent reviews and keep review quality high. We do not post reviews by company employees or direct competitors. We validate each review for authenticity via cross-reference with LinkedIn, and personal follow-up with the reviewer when necessary.