Most Helpful Review
Find out what your peers are saying about NETSCOUT nGeniusPULSE vs. Plixer Scrutinizer and other solutions. Updated: March 2020.
406,607 professionals have used our research since 2012.
We asked business professionals to review the solutions they use. Here are some excerpts of what they said:
It is a central solution in terms of how to actually use it. It has a very easy dashboard. Everything is concise. We are able to create custom sensors. For different parts of the business, we have many products across many environments, and it works for everything.
The fact that I can use custom MIB files to customize my sensors for the things that are not there as a default is a good feature.
The most valuable feature is the ability to span multiple technologies and multiple vendors.
We can see trends for a lot of different things, such as hard drive space and bandwidth usage. We can see and plan for the future by knowing, "We're sort of at 75% capacity now. In three months time, we know we're going to be up to 90%,so we need to plan ahead for it, getting upgrades booked in place." Since things like this take time and effort, it's handy to see trends into the future of where our company is going.
The solution provides us with needed feedback on our IT infrastructure. It gives us really good quality of service when it comes to monitoring of available space and available resources. It allows us to preempt issues before they become a problem for the business.
It is easy to use and intuitive, which is really important. It does what it says on the box by giving you a visual of the state of what is going on at any one time.
It is pretty simple to use, which is always a good thing. It's been very reliable in updating us if any issues crop up.
We use the remote probes a lot for our branch offices. Instead of deploying the full instance of PRTG, we'll put a remote probe out there. This simplifies the whole deployment for us.
This is a very reliable and complete solution for troubleshooting and monitoring environments.
I like the single pane of glass view. I like being able to go to one place instead of having to hunt around for everything.
I like the single pane of glass view because it presents everything in one window, obviously. You can see it all. With a quick glance, you get a pretty good snapshot of what's going on in a particular situation.
It helps us determine what is going on with our Internet and who is hogging it all up. If we get a real high throughput or a throughput that's going over and getting dropped fairly quickly, we can tell who (or what device) is consuming that traffic.
Visualization of the network traffic is the most valuable feature. It allows you to drill into information quite quickly.
The solution helps to enrich the data context of our network traffic. It allows me to see what applications are most in use on a slightly historical basis, going back a day or week at tops. It allows me to tune QoS or traffic shaping around what's being used. It saves me from having to unnecessarily upgrade, if I don't need to.
We have had many requests to understand in the network which devices are connected to others. Most people don't have this information or are able to establish a map of data flow everywhere around the network. Scrutinizer can really help with this. We are using it to understand who is talking to what, how, and which protocols can help us to improve security and analyze flow.
It shows us the saturation of the network of devices. It gives us a clear view of the flows in the network to understand, for instance, planning upgrades in the network to get an idea of what's going on the network on traffic flows. It gives us insight, for instance, on what's going on on our VPN Client. There are a lot of things where it provides very helpful information. It also gives us our security reports with quite detailed information on what's going on in the network, and whether there are data exfiltrations and so on.
As a network engineer, the ability to identify what traffic on the link is consuming all the bandwidth at any given time, and provide immediate feedback to the business, is the most valuable feature.
The reporting and generating troubleshooting reports would be the best feature; our host-to-host conversation reporting.
It's agnostic as far as what your network gear is. As long as it supports an sFlow, JFlow, NetFlow, some kind of flow monitoring, Plixer will support it very well.
With custom sensors, there is a lot of work which needs to be done in the background, just for it to be tailor-made for the specific thing that we are actually monitoring. We take a lot of time with the custom sensors. I would like to see the customer sensor be more robust and a bit more varied.
I have an issue with DFS, distributed file services... there isn't one by default. Taking into account the difference between DFS and DFSR as well would be great.
The dashboarding definitely needs improvement.
The only sort of limitation is the actual probes. So, if you don't have enough probes on there, you can over flip them and cause the WMI sensors and SNMP sensors to sort of overload. Sometimes, they might timeout for a minute, but they do come back.
The desktop app is the one area where it do with some improvement. From a user's perspective, I would like to be able to get more out of the desktop app as opposed to where we are now with it.
While the desktop app is good, they could slightly improve it. We would like it to be a single pane of glass. At the moment, you can only see certain portions of information. You have to scroll through to make it more granular. We want them to develop the desktop app to be more user-friendly.
Once you start going above 5000 sensors, things do start to get a bit shaky. There are some best practice out there that you will need to adopt and be aware of.
We would like more cloud native sensors for AWS, Azure, Google Cloud, etc. A lot of businesses are moving in that direction, so having something where we can pull performance stats out of these cloud services would be great for us.
The GUI interface and dashboards could be more attractive to the customer.
In terms of additional features, I would like to see better event notification. Right now, we put in an email address to receive an alert and it receives every event and every alert that comes out. We need something a little more granular.
Usability is the area with the biggest room for improvement. We've found that with NETSCOUT, while it's a fantastic product, the usability is a major factor because there are just way too many clicks. It's obvious, from our experience, that the people who are developing the product aren't using it.
I wish the reporting side was easier to work with, but it does a decent job. I also wish the reporting side was a little more intuitive or they offered more reporting examples.
It would be useful if there was a way to back up the configuration information. E.g., if you wanted to deploy a new instance or disaster recovery, you could quite easily deploy and restore the config, as opposed to having to restore all the NetFlow data. If there was just a button that said "backup config information", that would be good.
The visual acuity of how it presents data can sometimes be confusing. It takes a bit for people to spin up how to look at the graphs.
For updating the Scrutinizer platform, when we have the actual data, it never happens in one day. Every time we have the data, we are obliged to install a new server in order to integrate the old data, and every time it has a problem. Most of the time, we were obliged to scrap all the data because we couldn't transfer it to the new server. So, it would be very good if they could improve this part.
Data retention needs improvement. Data retention is a thing where we are looking for a better way to collect flow data for a longer time to do forensic research on security incidents. By default, data retention is quite low. We need detailed data in safe storage for a longer time, e.g., for a couple of months. An improvement would be a way to export data into a secure long-term storage.
There is room for improvement around the data that they have on the website about solutions... they should have more templated solutions on their website. Going out and identifying how to do RTP performance with a Cisco router, or how to do application response times in an Arrista data center deployment was where most of the work was... They should spend some more time documenting solutions and putting together white papers.
Knowing that they're coming out with a new user interface, that is an area where there is room for improvement. There are so many variables. They should limit the variables in the user interface and create some classes, like "simple," "novice," and "expert" to narrow down the variables within it.
They're working on the security areas, so it can provide more insight. What they have is still pretty much IP-concentric. If they were to make it IP and URL, they'd be a little bit ahead on that.
Pricing and Cost Advice
We used a product called SolarWinds in the past, and its cost was high. Whereas, PRTG came in at a third of SolarWind's cost.
Cost was a factor when selecting this solution, but it just did everything we wanted it to do.
Our licensing costs are 10,000 euros over three years.
At the moment I'm only using 500 sensors. I pay yearly, so it's a cost that's easily swallowed.
We have an unlimited perpetual license, so we just pay support costs and it can scale throughout the organization.
We looked at PRTG and SolarWinds. From a cost side perspective, compared to PRTG, and from what you get back from it, PRTG was sort of a hands down the winner.
While I am not the person who deals with pricing, I would say that we pay around 1000 pounds a year.
It is about £4,500 for the first year, then about another 15 to 20 percent annually after that. So, we are looking at about £1000 running costs a year. When you think about how much an outage costs per minute, it's negligible.
Cost is contracted on a yearly basis. There is no additional cost beyond the standard licensing.
There are no extra costs. It's about $8,000 a year. The bang for the buck (cost) is definitely a plus.
We have increased the license over time. We have added more licenses as the network has grown.
There is a recurring maintenance fee after the initial purchase or if we want the license upgrade.
The license is per device. We have 50 devices.
We just renewed. The pricing is 5,000 euro per year. This is the final price. All tax (20 percent) is included.
We recently bought a license upgrade, so we will integrate more exporters. We upgraded from a 25 exporter license to a 50 exporter license. Therefore, there will be more flows, and this will be an extension. I don't know when we will purchase a faster server, because the server that we have is quite new.
It's about €10,000 a year for initial license and yearly maintenance costs. In addition, the hardware costs are about €10,000 once every five years.
We pay our one-off cost for the licenses, per device, in blocks of 50. And then we pay an annual maintenance fee of about $15,000 Australian, which is, at this point in time, about $9,000 US, for those 250 devices. The upfront costs for the 250-license use, were about $50,000 Australian, which is about $32,000 US.
Compared 12% of the time.
Compared 11% of the time.
Compared 10% of the time.
Compared 51% of the time.
Compared 49% of the time.
Compared 21% of the time.
Compared 14% of the time.
Compared 12% of the time.
Also Known As
|PRTG Network Monitor runs on a Windows machine within your network, collecting various statistics from the machines, software, and devices which you designate. PRTG comes with an easy-to-use web interface with point-and-click configuration. You can easily share data from it with non-technical colleagues and customers, including via live graphs and custom reports. This will let you plan for network expansion, see what applications are using most of your connection, and make sure that no one is hogging the entire network just to torrent videos.|
NETSCOUT’s nGeniusPULSE delivers the visibility needed into today’s evolving IT eco-system to ensure the availability, reliability, and performance of your mission-critical business services across your multi-cloud environment, from wherever users need access.
The Scrutinizer incident response system leverages network traffic analytics to provide active monitoring, visualization, and reporting of network and security incidents. The system quickly delivers the rich forensic data needed by IT professionals to support fast and efficient incident response.
Get ahead of IT infrastructure issues
With PRTG Network Monitor you can identify and solve potential issues before it affects anyone. Download a free 30-day trial today and experience the benefits of 24-hour IT Infrastructure Monitoring.
Learn more about NETSCOUT nGeniusPULSE
Learn more about Plixer Scrutinizer
|Jameson Bank, Sidnix, RungeICT, MedicalAnimal, Truck-lite, GamingGrids, The Covell Group, Forsythn County Schools, NetMass, Musgrove Park Hospital, Lanes Health, Columbia Southern University, Vodafone, Intrust Bank||Banco Votorantim||Oxford Networks, Squaw Valley Ski Holdings, UltiSat, Wipro, West Aurora School District 129, SUNY Geneseo College, Bloomington Public Schools, First National Bank of Pennsylvania, Kitsap Credit Union, Metropolitan Transit Authority of Harris County Houston Texas, Carilion Clinic, Banner Health, IDEXX Laboratories, Phibro Animal Health Corporation, Goodwill Industries, Parmalat, Armstrong Coal Company, Flybe, James Walker|
Financial Services Firm13%
Comms Service Provider13%
Software R&D Company36%
Comms Service Provider14%
No Data Available
Financial Services Firm29%
Software R&D Company42%
Financial Services Firm13%
Comms Service Provider9%
No Data Available