Nutanix Cloud Manager (NCM) Reviews

El producto es muy estable, también proporciona una interfaz extremadamente intuitiva, pero al mismo tiempo logra un nivel de control sobre todos los recursos. Tuvimos muchos problemas de monitoreo de plataforma ya que trabajamos con un gran volumen en términos de equipos de servicio, esto se debe a que somos una empresa cuya función principal es proporcionar servicios a los usuarios finales a nivel de soporte, requisitos y fallas. Por lo tanto, es de vital importancia mantener un mejor control de nuestro centro de datos. Una vez más, menciono que es un producto 100% recomendado.

Como una mejora, me gustaría ver una variedad de idiomas y un poco más simplificado el proceso inicial de conexión de red, a pesar del poco tiempo que tengo administrando esta plataforma en mi organización, considero que realiza el trabajo especificado en el Para los requisitos de la empresa para la que trabajo, también tengo poca experiencia en el área, por lo que recomiendo esta herramienta como el primer paso para un gran nivel tecnológico de conocimiento, mis colegas y yo estamos felices de haber adquirido Prism Pro.

Tiene una mejor gestión de la plataforma de ahorro de costos y un mejor control y mantenimiento de los recursos. No puedo pensar en ninguna mejora en este momento, pero el soporte es de primera categoría. Hemos tenido muchos problemas para actualizar desde el principio. Al principio, vi el manual de usuario del producto, pero al instalarlo y administrarlo de una manera práctica, pude ver que es muy amigable y confiable a nivel de interfaz, al mismo tiempo muy específico, muestra características de los recursos nunca observado al menos por mí en plataformas similares

Considere que es una plataforma interesante y muy amigable que permite una mayor eficiencia de gestión, permite un mejor escenario de monitoreo. Sin embargo, sabemos que la tecnología avanza día a día, una buena estrategia sería crear una aplicación gratuita, el usuario puede estar aún más interesado en la plataforma, puede controlar el monitoreo a través de teléfonos y enviar manuales o folletos de información por correo para ir a mano junto con la plataforma y sus actualizaciones, además de las actualizaciones realizadas por el monitor en cualquier lugar donde estemos encriptados.

He estado usando Nutanix Prism Pro durante seis meses. 

La estabilidad es increíble.

I have not used previous solutions

We had large testing VM servers environment on Cisco UCS with Nimble storage, and we have a large Dev environment on Azure. We have a hard time monitoring and managing both environments. And we end up paying lots of money for both. After talking to Nutanix, we ordered 8 nodes, setup and we migrated most of our Dev/Test VM servers back from Azure back in-house. We use Prism to manage all of them from single point of view, have overall picture of our whole environment. The dashboard is the best spot we check and keep it on our screen every day.

We had a test VM environment on Cisco UCS and Dev environment on Azure. From time to time, we need to transfer a large amount of data from one to another. And we have to spin up a different set of test/dev environment, which was challenging. We had many struggles with VM updates and configuration synch up. Since migrating to Nutanix, we have a single virtual platform for both test and Dev virtual environment. It's easy to transfer data and synch up the change and manage/monitor from a single point. Backup is much easier too. 

• Update management for all nodes, which included in it and it is straightforward and visual upgrade processes. 
• Calm is another good feature we are looking at to use the playbook to manage all VMs. We are likely to give a trial on that.
• File is a cool feature that allows you to share files like windows server but actually without a server and it can replicate the changes by using a build-in replication tool. I can snapshot the shared data and the user can restore the files by themselves if needed, which saves lots of effort of SD.

I still remember it was a struggle when we configured the initial network setup, that part was a little bit confusing about how exactly it works, we have two different Nutanix technicians who were on-site to help on the configuration. But both of them could not get right the first time, and we had to reset and start over again on both systems. Even after that, I was still a little bit confused about the virtual network and how each item was configured to work. I would think why do not have a single virtual IP and webpage to guide on that, or sort of wizard to guide through it.

I have been using Nutanix Prism Pro for two years. 

It is a very easy and stable solution, we have not had any issues. 

It is very easy to scale out, you can just keep adding node to have more capacity, and mange from the same prism.

Support is good. But we do not use them much.

We used Cisco UCS with Nimble storage which was over the capacity, then we got some VMs on the Azure, which we have to manage separately. So we moved everything to 8 nodes Nutanix and manage from a single point.

The setup is straightforward. Only the initial network setup is a little bit confusing.

We deployed mostly in house, but we have help from Nutanix engineer. They are very good.

The ROI is better than what we have on Azure and UCS.

The set cost is very minimal, the Nutanix pricing is good too. The file licensing should be bound into the system already.

Yes, because the UCS is close to end of life, we tried to move to Azure, but the cost skyrocketed. 

Our primary use case is cloud computing for government clients of the territory, which has all its services in the cloud.

So far, the level of performance in each client has been satisfactory. This has helped to earn our organization a high reputation, with thanks to the service provided. Being a hyper-converged infrastructure and market leader, we can have many benefits and a lot of return on investment.

The main benefit is to improve and increase the portfolio of products in the Corporation. The slogan of our cloud is hyper convergent, and the results have been satisfactory.

The administration components are the most useful since, with them, we have been able to win and perform preventive measures in the administration of the hyper-converged Nutanix infrastructure.

It has a very useful and intuitive interface. Administrators trust it to perform preventive diagnoses on the platform, which helps in the administration of the infrastructure. We have been able to gain a lot of experience in all aspects of administration, which has made us a competitive organization in the Cloud Computing market.

All of the tools that Nutanix brings have supported us to improve the service provided to our customers.

The most innovative part of the platform is the set of predictive monitoring tools. They help IT administrators in preventive monitoring and as a service in Cloud Computing services.

We would like to be able to provision virtual machines at the computing level, as that would give us an added value against the competition. Being an infrastructure free of licensing and being able to count on the over-provisioning of resources would be helpful.

We have been using Nutanix Prism Pro for about five years.

This product is highly stable.

The scalability is high.

The Prims Pro tool, being free, improves the ROI in the organization. The most important thing is to have a return on investment, which we have achieved. We have also gained prestige in the face of the competition, and we hope to continue growing in infrastructure.

We evaluated other products before settling on this product. It really has its qualities and as a service provider, we have been able to compare it with other infrastructure and we have seen that it wins in all aspects.

Our company is a telephony provider for small/medium-size businesses, as well as large scale enterprises. Our primary use of Nutanix Prism Pro is for virtualization of cloud-based Private Branch Exchange (PBX) VoIP/SIP compatible systems that are privately accessible to our clients over the internet. We use Prism for the creation and management of virtual machines for customer use as well as for configuring backup solutions for the systems that we offer. It is one of our main tools for what we offer.

Nutanix Prism Pro and Nutanix AOS have greatly improved our organization by providing a reliable and simple solution that requires little to no maintenance in order to successfully offer a stable service to our clientele, as opposed to the competitors.

For the approximate two years that we have been using this solution, we have not once had an instance where we were left inoperable or non-functional due to the integrated high availability features that are integrated with the product. Even among experiencing hardware failures, we were able to function as if nothing had happened and we could seamlessly repair or replace key components without customers even realizing that there was ever an issue.

The features I have found the most useful are the health checks, extremely fast snapshots/restores, and the high availability service.

The dashboard for Prism Pro is extremely elegant, powerful, and simple, with everything needed at a glance, including but not limited to, the health status of the cluster, the operational state of your environment (in our case virtual machines), and ease of navigation through fields that are less common, but none the less necessary such as disk imaging and simple one-click upgrades.

There is not much to say in this regard. The system is very feature-rich and if it cannot be taken care of in the Prism GUI then it definitely can be in the ACLI.

I do, however, wish that the cluster would come preinstalled with the OS, as ours did not, and it took quite a bit of tinkering, trial and error, calls to Nutanix support, and an ample amount of time to figure out how to get everything up and running. I feel as though this can be greatly improved by providing more documentation and instructions if the system does not come preinstalled with any OS.

We have been using this solution for just over two years.

A1! As I said in one of my previous statements, even in the midst of a critical hardware failure, the solution was able to carry on as if nothing happened due to the way the High Availability feature functions.

The sky is the limit with the scalability of this solution, new nodes and cluster integrate seamlessly and quickly.

Yes, the previous solution that we had used was VMWare ESXi. While it is one of the more popular Hypervisors, it is not nearly as intuitive, or even in the same range of power as Nutanix.

The initial setup was complex initially due to the lack of the base operating system being installed on the cluster.

We implemented in-house.

It is hard for me to speculate on ROI as I am not deeply rooted in the financial aspect of our company, I would estimate that we hit our ROI a year after integrating this product.

While Nutanix can seem more expensive initially than the competition, the return on investment is much faster and all in all, very much worth the price.

We also evaluated Microsoft Hyper-V, Citrix, KVM, and a new ESXi solution on newer hardware.

I currently use Prism in my work. All of our work is done within this environment as we also use AHV as the primary hypervisor. It was a resounding change since we migrated from vSphere and vCenter as a truly incredible level of simplification is achieved. One of the great advantages of Prism is its vision at a glance of our entire environment, be it a cluster of three or four nodes or hundreds of them. Finding what you are looking for or visualizing a problem is just a matter of a few clicks, so simple.

One of the great advantages is that it offers an extremely intuitive interface, but at the same time it manages to offer a level of control over all the underlying infrastructure that no other product provides. Options like One-CLick Update make the tool worthwhile on its own, as well as detailed performance metrics for each component in real-time. Its use is fantastic and managed to improve the response times of our IT department, optimize their tasks, achieve more free time to carry out other tasks, and really focus on what is important in the business. Other solutions spend a lot of time setting up an environment that, like Prism, should include everything you need to operate efficiently.

As I mentioned earlier, One-CLick Update, the dynamic monitoring of the entire environment, its simplified search, and all the reporting functions it offers to allow for really complete and neat infrastructure management. All of the additional features included allow for a very advanced level of general understanding. Virtually nothing can escape us working with the tool since every small detail (for example, an IOPS level outside of normal) can be analyzed in detail, generate an automatic report and send it to our team to immediately deal with it.

Perhaps the only point I see as an improvement would be the support of multiple languages ​​in the environment. One of the few things within which I see an improvement point could be the inclusion of multilanguage in the environment. Although it is extremely intuitive and everything is seen in a totally clear way, for some people who do not use English as the main language, it would be interesting to achieve a translation. I am not saying that it is in hundreds of languages ​​or alphabets, but if for example Spanish could be used. This would bring advantages to the Spanish-speaking world that is not used to English.

I have been using Nutanix Prism Pro for two years.

The stability in all Nutanix software is really perfect.

Scalability is one of the intrinsic characteristics of environments. It is a perfect web scale model

Technical support is the jewel of Nutanix and its products. There is no other company with this level of response and quality after Apple.

We previously used rackable servers and VMware as core software along with vSPhere as hypervisor. We switched to Nutanix hardware and its free, native hypervisor AHV, which is really cool.

The initial configuration of the entire environment and its tools was practically invisible. The learning curve does not exist, literally.

The implementation was in-house. Zero problems

In our case, the ROI was only 11 months.

It is essential to take into account the licensing terms. In this regard, Nutanix offers options that allow licensing for much longer terms than the competition and that is a great advantage.

Before using this product we evaluated vxRail as a solution, but economic aspects and compatibility problems made us go for Nutanix and its environment.

Undoubtedly a world-class solution in the administration of hyperconverged environments.

The most valuable features are the: 

• Compliance features 
• Chargebacks.

It is stable. 

It is scalable. We work with small, medium, and enterprise-size customers. 

Their technical support is very good. 

The initial setup is simple. It only takes a few minutes, maximum one hour. 

The pricing should be lower. 

I would rate it a nine out of ten.

In the next release, I would like to see more cloud providers like Micro BH or local providers.

We use Nutanix Xi Beam for cost optimization and security compliance.

Nutanix Xi Beam's executive dashboard is valuable. It provides a complete sense of the whole infrastructure, right from a costing standpoint and a billing standpoint. It also shows your compliance requirements and solution insights.

I think Nutanix Xi Beam can be more cost-effective. 

This product should have a sense of what their users need. Few systems are not business-critical, but they run 24/7. This product usually works on average utilization. It should help us by showing the peak utilization and make recommendations. Otherwise, we play a blind game of cost optimization. If you reduce the configuration of the servers' recent size and the peak workloads come, there'll be a huge outcry because of business disruption.

Integrations are mostly based on APIs. It needs to build some good level of interoperability between the platforms, like in the multi-cloud environments. Otherwise, the process infrastructure isn't fully-fledged, and we won't know what kind of workloads can be offloaded from the cloud to on-premise. This can reduce the cloud's footprint, not just from a cost-saving standpoint within the cloud, but also from understanding the whole ecosystem and the infrastructure. 

I have been using Nutanix Xi Beam for more than a year. 

Nutanix Xi Beam is a stable solution. Our expectations are a bit average and not high. In that sense, it's good.

Initially, we had tech support, but now we're solely dependent on our in-house workforce capability.

I have used a startup solution called CloudOptics, as well.

The initial setup is straightforward. We didn't integrate it with anything, but we plan to integrate it with many other solutions to bring some interoperability to it. 

We started small and then started expanding. Now it's targeting only AWS, and we don't have any difficulty with cloud deployment.

A reseller, a Nutanix partner, implemented it.

Initially, it was monthly, and now it's on a yearly basis.

I have used a startup solution called CloudOptics, as well. We had a good demo of Nutanix Xi Beam in 2018 0r 2017, and it was one of the best tools at that time. We stuck to two or three products. I think one was Tableau. We tried the Nutanix Xi Beam one-month free trial and saved a lot of dollars within that month. That's when our leadership made the call.

On a scale from one to ten, I'll give Nutanix Xi Beam a seven.

I'll tell potential customers to explore their options because there are a number of competitors in terms of competency and pricing.

We are a reseller and this is one of the solutions that we provide to our clients. We do not use this solution for our company.

This solution is used by customers who want to manage a hybrid cloud, with part of it on-premises and part of it on the public cloud.

In this solution, it is difficult to organize the VM folders and subfolders. If in the next version they could make this easier then it would be a great product.

The Nutanix technical support is very, very good.

I do not have enough experience with this product to fully judge it, although I have seen many of the features in demonstrations. I will know a lot more once I deploy it for the first time.

I would rate this solution a six out of ten.