The deployment depends on the configuration but requires two people and a week.

I rate the initial setup a seven out of ten, where one is difficult and ten is easy.

Setting up HPE StorageWorks MSA, including the NTA, is straightforward, thanks to HP's user-friendly configuration process. The step-by-step wizard simplifies the process, and even without it, configuration is manageable. Good support from HP adds to the ease of setup, making it accessible for those familiar with the process.

The solution's initial setup is straightforward. Once you get the IP address, you can easily create these groups and add a host.

I would rate my experience with the initial setup a ten out of ten, where one is difficult, and ten is easy to set up the solution. 

It's pretty easy to install.

I was involved in the initial set up. We had to build from scratch, so we had to have all the servers and all the MSAs put into place. It is definitely a straightforward process. Very easy to use and configure.

Very straightforward. We used an iSCSI platform which was pretty easy to set up. All of my technicians can take of it, and it's good to go.

The initial setup is straightforward and the deployment is very quick.

The setup is pretty straightforward. 

The solution is hardware so you just have to build the functions of the system including the RAID. It takes a little while, but is straightforward. 

The initial setup is quite straightforward. It's very easy to deploy in general. It's not complex at all. A company shouldn't run into any problems during the process.

We were able to integrate it with different operating systems without a problem.

The entire implementation took about one day. It wasn't too long of a process.

The initial setup was pretty straightforward.

Very easy and straightforward.

Very straightforward and we’ve got about eight of these setup. We had it delivered to the site and just plugged it in for the customer.

The installation is straightforward. The time of the installation depends on the environment. However, it typically takes less than one hour.

Deployment out-of-the-box until the final configuration took roughly 15 to 30 minutes.