Meraki Dashboard Room for Improvement

ITSM SME at OnServe

The biggest problem is the absence of a VPN client like AnyConnect with the device. The Meraki rep that I dealt with actually agreed. He said a lot of people are complaining about the fact that they had to work with a separate VPN.  

Here is the problem. Let's say you have got to deploy and install a VPN client on 50 workstations. You physically have to go to every one of the 50 workstations and do the VPN deployment manually. You can not just push it out through an email or a group policy. That means you have to touch every machine and configure it based on the type of network card it has and make a whole bunch of other settings.  

Manually deploying the VPN is about a 20-minute procedure and that is after you learn how to do it. By comparison, if I wanted to roll out 1000 VPN clients with a normal Cisco device, the Cisco AnyConnect software can be just pushed out with some easy instructions and away you go.  

I think the VPN client is really the only true issue I had with the product itself. The connection that I get from home is sometimes a little shaky when I have to use it remotely, but it is impossible to put the blame on that connection as due to Meraki.  

View full review »
Solutions Consultant at a comms service provider with 201-500 employees

I don't think that Cisco needs or wants to improve Meraki. Meraki was acquired by Cisco, and Cisco knows exactly what they wanted from the product. This product is only fitting for small to medium business. In order to work with large corporate enterprises, they have acquired another company that will help them provide an enterprise solution. That's why they are not going to improve Meraki. If they were going to try to scale the application of Meraki to enterprise solutions it would not be a good fit.

Both of the Cisco products don't yet support layer 2 MPLS (Multi-Protocol Label Switching). The only vendor I know of today that is supporting MPLS is Nokia. None of Cisco products supporting that protocol, so I think this is a gap in Cisco products.

View full review »
Product Specialist at a comms service provider with 1,001-5,000 employees

The product can be improved around the captive portal portion. It may be helpful to have maybe some popups or blurbs that just guide you in terms of how to use it or explain what a certain input means. Also, for example, the summary dashboard is under Organization, instead of under Network and sometimes it gets confusing where to actually find the summary dashboard. 

For me, from a usability or user journey perspective, it can be a bit more intuitive. For example, I want to see the summary from my Network but I have to go to Organization. Also the guides: they are great, but it's very difficult to find user guides, specifically on how to use every single feature. If I have to draw up the user guide, it's quite difficult to find the content. And maybe something which is connected with the support, or the price, or something like that. Or functionality, like more features.

View full review »
Learn what your peers think about Meraki Dashboard. Get advice and tips from experienced pros sharing their opinions. Updated: May 2021.
510,882 professionals have used our research since 2012.
Solution Architect- Network Infrastructure at a tech services company with 201-500 employees

Overall, the dashboard is already quite good.

However, a few popular improvements that could be suggested include user-based tracking and user-based location tracking. If a client could add those things on, on top of whatever they're using, that would be ideal.

For example, within a building, if I am a user and I have a seat on the fourth floor, if I move across the building, the system should be able to track me and should be able to figure out my whereabouts or my position within the building if I'm connected to the wireless. That would make the administrator's life easier in terms of reachability.

There should be a certain amount of visibility in terms of security validation, or vulnerability assessment. If that can be incorporated, that would be great.

For example, in a single dashboard, you could be getting security incidents, so you could better be able to understand your readiness from the security perspective.

View full review »
Apprentice Technical Project Manager at a retailer with 201-500 employees

The MDM needs improvement. I know that we used to use the MDM for a long time, for one or two years, but we had to leave it because it wasn't really good enough for us. THe MDM should be improved.

View full review »
Network Technician at a government with 10,001+ employees

The one issue that we have had is that the VPN tunnel would go down unless you worked out with the ISP that you would be using a static IP address on the WAN interface. If you're allowed to just be dynamic then whenever the port and IP changes, it will break the VPN connection and it does not always come back up. Our ISP has the dynamic IP addresses change on a cycle, so this was a problem for us.

View full review »
Network Administrator at a healthcare company with 201-500 employees

It would be helpful to have the ability to create a floor plan based on an existing PDF or JPEG, which is automatically converted into a usable network map.

View full review »
Practice Director Network Infrastructure at Maureen Data

Something that needs to be improved, is the fact that you if you don't renew the subscription license, it stops working. I would also like to see SSL BPM support for anything else.

View full review »
Network Support at a retailer with 5,001-10,000 employees

Probably the thing that could use the most improvement is the terminal monitor issues on ports. According to Meraki support, we need a third-party program to integrate other, non-Meraki switches if they don't have that integrator already. It is not a problem with the Meraki switches, of course.

View full review »
Solutions Consultant at a tech services company with 501-1,000 employees

They can improve the landing page in Meraki Dashboard. When I go into an organization, they can include a lot more infographics. They can also simplify it a bit and consolidate it. For example, if I've got five branches and I go into customer A's profile or organization, I'd like to see an infographic on the landing page providing a snippet of the entire network layout, that is, all branches in one snapshot. From there, I would like to go into the network that I want to work on or view.

View full review »
Owner at a tech services company with 11-50 employees

There is a bit of a problem when you try to log in and you don't have a fixed IP address. 

If you're granting access, you need to log in by using the IP address. If your administrator's IP address is not a fixed IP address and it has changed, you might need to update the changed IP address in the interface. For this, you need to log in to the interface to update the IP address. This issue might not have so much to do with Meraki interface. 

View full review »
CyberSecurity & Cloud Solutions Manager at alet communications

There are some issues with the NAT configuration, it is now impossible to some operations with the solution.

I would like to see a VPN feature in a future release that supports tunnelling.

View full review »
Network Administrator at Diversicare Healthcare Services

I am concerned about the fact that once your licensing expires the devices stop working and become a brick.

View full review »
Adm. Director at a tech services company with 1-10 employees

The initial setup is complex and can be made more straightforward.

The scalability can be improved.

View full review »
Analista IT at Randstad

We would like to be able to test the health of WAN connections.

View full review »
Learn what your peers think about Meraki Dashboard. Get advice and tips from experienced pros sharing their opinions. Updated: May 2021.
510,882 professionals have used our research since 2012.