In our CCTV system, we have two types of cameras: analog and IP. For the IP cameras, we utilize switches with PoE. This feature eliminates the need for a separate power cable, as the camera receives both power and data through a single Ethernet cable. We have found that MicroTik switches work seamlessly with these cameras, providing reliable operation without any issues.

Using MikroTik Routers and Switches, I can perform network segmentation for both LAN and Wi-Fi networks, and even for 22-point solutions. Additionally, I can use these devices as a firewall. 

Even a MikroTik switch can be made to be a router. And even a router, you can convert it into a switch. It depends on your configuration and the way you set it. If you want it to be a switch, it'll be a switch. If you want it to work as a router, it will work as a router. This is not like Cisco, for example, where a router cannot be a switch.

We use them for running services, especially big PoE services and VLAN routing. We also use them at remote premises to provide quick Wi-Fi. For switching, we use them for regular switching and in places where we need a lot of fiber interfaces.

We use MikroTik routers for routing, mainly for the connection between our branches and the head office factory.

The process is for microservices, and we use it to differentiate between the Internet lines, like one for LAN, from our LAN to branches LAN, and factory LAN. Actually, we use the MAM (Metropolitan Area Networks) by MikroTik reseller.  We use the GRE and IPSEC protocols with our MikroTik routers.

The solution is used for site-to-site VPN, and it can also be used as a router as a CPE. So, we normally give them the solution so that their NetLog and everything can be captured in the server because, ultimately, it is a requirement of the Department of Telecommunication in our country. For all the leased line users, we are supposed to keep the NetLog. MikroTik is mainly used by some SMEs, and more specifically, it is for SME clients only.

Depending on the specific requirements, I utilize MikroTik Routers and Switches to configure IPSec connections between two sites, where one serves as a backup and the other as the production site. Additionally, I employ them as an internal VPN server for external users. These devices are also used for routing and firewall purposes, and I take advantage of various other features, such as redirection, blocking, and more.

So the company I work for sells a guest Wi-Fi platform for restaurants, bars, cafes, hotels, etc. 

Predominantly, we configure MikroTik Routers and Switches with our platform and then integrate them into the existing network of the businesses.

Our clients use it to implement network solutions.

We use the product for VPN. 

We use MikroTik Routers and Switches for maintaining and controlling our network.

We use the solution to provide the same speed internet to 3,000 users, including students and teachers who are using this in school and college.

We had been using MikroTik as a firewall to implement firewall policies and to implement queues along with DNS and DStv services. Additionally, we were using MikroTik to control our end users by limiting their website browsing and the limiting their upload and download speed. The aim was also to prevent them from indulging in any unauthorized access to the internet.

We are using this as a pop router, and also as an enterprise solution. We are using this for load balancing.

I am a solution provider and I deploy this product for my customers. Primarily, it is used for last-mile access. When I deploy it in an enterprise environment, It is normally for bandwidth control.

We use MikroTik's fiber router for Internet access.

We are a public sector medium-sized company. We use MikroTik's router part for managing internet circuits, particularly in cases where cost is paramount, ensuring cost-effective access for internet circuits.

It's used for my home internet router and wireless.

We're currently using MikroTik Routers and Switches for around six gigabytes, and we're upgrading to about 13 or 14 gigs. It's unable to handle that much upload, and that's why we're upgrading it.

We manage wide area networks for our clients nationwide. We run a data center and provide internet services. We use MikroTik for our network operation centers. We also manage WiFi for hospitalities and a lot of multi-dwelling units. 

We have experience in deploying MikroTik, NETGEAR, and HP products.

I've mostly been using the solution for mostly routing and user management.

We use the solution as a main router for the company. MikroTik is very cheap in our country compared to other products.

We have use cases like providing power over ethernet, as an access controller for Wi-Fi, and normal networking. 

I am not using them personally. I've installed these in high-end residences and a few offices. 

We use MikroTik Routers and Switches for Wi-Fi distribution and connecting the network to all our IoT devices.

We primarily use the solution for routing and switching. We deploy the system with Fortigate.

The primary case of MikroTik Routers and Switches is for router purposes.

We are primarily using the solution as both a router, and we are using this for a wireless access point. And, we use the VPN, which is really helpful too. 

We also use it to connect to other branches that we have, and other organizations that we have to be connected to for our company.

We have a website with online shopping, and the MikroTik products are part of our network infrastructure. We also resell these products, and our customers buy them for both wired routing and wireless access points.

We use the product as a cybersecurity device. We use MikroTik Routers and Switches for a large client to provide them with services such as traffic shaping, firewalling, and categorization of internet access. This enables us to implement measures like blocking unwanted access

The solution is primarily for routing and switching.

We use MikroTik Routers and Switches as access points rather than all-purpose routers. We are not working with all of the functions as it is also connected with the Catalyst Switch.

We are a system integrator and this is one of the solutions that we implement for our customers.

Our primary customers are Fiber to the home (FTTH), which are small customers who are connecting by fiber.

I configure and implement WiFi internet and wide area networks using MikroTik Routers and Switches. I also use it for connectivity with end-users and for implementing a firewall and routing protocols.

I primarily use the solution as a firewall, and for routing purposes, and for multi-band load balancing. 

MikroTik is our main router for incoming and outgoing traffic throughout the system architecture.  

We use this solution for high-speed wireless connections.

We primarily use the solution for high performance, low-cost routers and for low-cost wifi environments where we need specific configurations.

We primarily use the product for load balancing and as a gateway.

We primarily use MikroTik routers and switches for LTE solutions. It's 3G, 4G, and gravitating to 5G solutions and we do a lot of data center type of solutions with the heavy-duty cloud core routers. We also do premises type of solutions with a lot of their switches. 

As far as which version we're using, the products are fairly standardized—what changes is the version of the operating system. We try and use the latest long-term versions of the operating system, but we use a wide variety of their products. 

This solution is deployed on-prem. We use the whole rack of MikroTik switches and routers. 

We primarily use our MikroTik devices as layer three routers.

We primarily use the solution for the internet.

We use this product to route traffic with dynamic routing protocols like BGP. We also use it for filtering traffic and making network translations to provide access to services that are behind it. In this regard, it acts as a firewall.

It hosts a lot of B2B sessions with our internal and external peers.

Our primary use case for this solution is to provide wireless internet service.

I have worked more with the MikroTik Routers, as opposed to their switching products.

We use this solution to route traffic in our network. For example, if one group is experiencing a slow connection then we can re-route the traffic. This is possible because we have multiple links on our premises.

We use MikroTik both in our company and clients. Even extended to our household clients. MikroTik devices offer you similar features you'll normally get from high priced devices like Cisco and HP, however at a fraction of the costs. This works very nicely with us since our clients are mainly small and medium. The device price doesn't dictate whether the client gets a solution.

VLANs, L3 Routing, Load Balancing, HotSpot are amongst some of the features we normally use in many of our deployments.

We use MikroTik Routers and Switches as a router and firewall. We also use it to manage our Hotspot users. 

We use this solution for normal routing, as well as load balancing for internet traffic. I have a dual internet load balancing setup.

This is an on-premises solution.

We are a solution provider and we focus on integrating and monitoring critical infrastructure. We offer many products to our clients for Wi-Fi, switching, cabling, and monitoring. We also offer sensors and other devices in our portfolio. 

We implement MikroTik Routers and Switches for clients with remote offices.

We use MikroTik Routers and Switches for our CCTV, Voice IP, and .NET in our new stores.

I mainly use this solution for hotspot networks but also for lots of other things, for example, to connect more than one type of server, merging more than one connection together, firewall, multiple ID cameras, wireless device to connect different sites, and VPNs.

We are using this solution for multiple things.

It provides a hotspot gateway, triple PoE, login ID, authentication, and login tapes.

We use it to provide a connection for our clients.

We mainly use this solution for switch and routing.

I mainly use MikroTik Routers. We use them for laboratory and integral solution purposes and different kinds of load balancing and network switching. We also use them for different kinds of use cases that highly rely on network switching. I am using the latest version, and I do automatic updates.