We rarely encounter any issues. The solutions have been very stable.

I rate the product's stability as seven out of ten. It needs improvement in terms of configuration.

The tool is very stable. We face failure issues only due to power outages. Apart from that, there is no failure. We have installed a lot of sites.

I rate them a nine because they are highly responsive, and we are satisfied with their service.

In terms of stability, it performs until lately, when it started to kick off my people. But it is not so often. It is during peak hours, like Monday mornings when we have so many Zoom meetings and then maybe Wednesdays when it is too busy. Other than that, it has been stable. We have been okay for the past two and a half years.

If my internet connection experiences disruptions, the Meraki registration on the internet goes offline, causing the device to also go offline. I would rate the stability nine out of ten.

The stability is fine until you upgrade firmware and then discover something doesn't work. 

It consistently maintains stability, ensuring a reliable and robust performance for our network infrastructure. I would rate it nine out of ten.

I rate the solution ten out of ten for stability.

These switches are very stable.

Its stability could be improved.

I rate the product's stability a ten out of ten. 

We encounter some issues related to DNS resolution once or twice a year. However, the stability works fine for almost 99% of the time.

I rate Cisco Meraki Wireless LAN's stability a seven out of ten.

Stability-wise, I rate the solution a nine out of ten.

I give the stability an eight out of ten.

I have not had any issues with the stability of the Cisco Meraki Wireless LAN. I am extremely satisfied with its performance and quality.

It's a stable solution.

I rate the platform's stability seven out of ten. Sometimes, there might be network outages or power shortages. The SSID remains safe; however, you may need to switch off your Wi-Fi and switch it back on the network to resolve connectivity issues.

I rate the platform's stability an eight out of ten.

I would rate the stability of Cisco Meraki Wireless LAN a nine out of ten.

We rarely have any issues with them.

The solution is stable and reliable. There are no bugs or glitches, and it doesn't crash or freeze. I'd rate the stability ten out of ten. 

Stability-wise, it's very good. The problem is the coverage.

It is a very stable solution. Besides a few outages from my power supply, I had no problems with the solution.

The stability of the network is very good. I think we had oversaturated our HQ environment, where we had too many devices in a particular location. We actually had to change some of our configurations because it was causing some connectivity competition between WAPs trying to connect. We had to remove a WAP to allow better connectivity.  

It is stable and very reliable.

I don't remember any outages that were caused by a loss of connection to the Meraki cloud controller. They can operate independently, which is good — they were stable. It has not been a chore or a very hard thing to work through. I really don't have any problems with the stability of the product. It's a good product, it's just not great for everybody.

I rate the platform's stability a ten out of ten.

 The product is stable and I have not seen any issues over the past couple of years.

The stability is very good. There are no bugs or glitches. It doesn't crash or freeze. It's reliable. It's been good so far.

It is perfect in terms of stability.

The only time we've had any issue at all is when the firmware upgrades don't automatically apply. You can set them to automatically apply, but you have to be really careful in a school setting, because you can't just say, "Oh yeah, I want to reboot this building." It would mean that the entire building will go down. This means that you have to schedule those a little bit differently. I always do it manually instead of automatically.

I wish it would let us do one access point at a time because then I could literally do a building. It doesn't let you do one at a time. It does let you schedule them as a network but doesn't let you pick a specific access point for a specific time.

The product is super stable. I would rate the stability a ten.

I don't recall facing any bugs with Cisco Meraki Wireless LAN, but the patches are done remotely.

The product's stability is good. The product can improve in the area of security. The switches provided by the product are good and are commonly used in Pakistan. There is also demand for used switches in Pakistan. In Pakistan, businesses cannot afford new switches, or they face some import-related issues when it comes to products like the Cisco Meraki Wireless LAN. Pakistan market has a few network switches in stock as a backup. In terms of network switches, the tool is good, and I rate it an eight and a half out of ten. In terms of security, the product needs to improve.

Stability-wise, I rate the solution an eight out of ten.

It is a stable solution.

It is not a very stable solution.

Cisco Meraki Wireless LAN is stable.

They have been very stable. We didn't see any issues.

It's quite stable. There are relatively few issues we've had with the product. Compared to others, it's more stable than most.

The product is stable. It is working well.

The solution is very stable. As long as your internet links are stable, Meraki works perfectly fine. There are no bugs or glitches. it doesn't crash or freeze. It's reliable. 

Its stability is a five out of 10.

It is very stable.

Stability-wise, it's excellent. However, the software cannot tell us where there are issues. It would be nice if it could point them out to us, but without that event's information, it's more of a challenge. In terms of when we see that it's working, we know that it will be working, period. It's simply reliable.

So far, we haven't had issues with stability. 

There can be problems if using older POS devices, WiFi APs, and you have a lot of people with mobiles around. So, say, a large event. The mix of signals can kill the WiFi APs and then you are left hard wiring "mobile" tills. Be aware if you're carrying old equipment.

The tool is stable. It is quite good.

The stability of good for Cisco Meraki Wireless LAN.

There have been no issues with stability. The solution is being used every day in my organization.

The solution doesn't require a lot of maintenance. It's easy to do. If you go on the cloud, you can just push the updates from there.

The stability has been very good. It's very solid. There are no bugs or glitches. It doesn't crash or freeze. It's reliable.

I rate Cisco Meraki Wireless LAN a ten out of ten for stability.

The stability is fine. I rate the stability a ten out of ten.

It is stable. I didn't have any issues with its stability.

We have probably 30 to 40 users.

The stability is good.

The product is completely stable in our implementations.

The stability of this product is good.

Meraki WLAN is solid. I can't recall the last time I had to replace an AP or anything like that.

The stability is very good. There are no bugs. There are no glitches. It doesn't crash or freeze. It's reliable. 

The product is very stable. 

Meraki WLAN is stable. However, some APs that are around five years old have peer connectivity problems.

The stability is very good. There are no bugs or glitches. It does not crash or freeze. It's reliable. 

Everything works. I can't knock the product. I know a lot of the senior management within Meraki and used to work with them at Nortel. I know many people who work on the product side, and I've never had a problem. I've deployed Meraki for one customer with 2,500 sites in the UK, and I don't think I've ever had a wireless AP go faulty on me. We've just never had a failure, to be quite honest. That's unusual.

In terms of stability, it's relatively straightforward.

This is a stable solution. 

It is very stable.

It's a very stable product, very mature.

I don't have any issues with the stability of the Cisco Meraki Wireless LAN.

It's a stable product. We don't have any issues with stability.

It's a very stable solution, the stability of wireless networks depends upon a lot of factor like how much and complex the requirement is for the customer, its not always necessary to have bulk Access Point installed on customer site, in case of Meraki as of different model option and feature like high-density broadcasting, few access points would be enough to cover WiFi coverage, The solution itself is stable. As its cloud-based Access Points, The stability in Meraki networks is autonomous. 

This is a stable solution, it's perfect! We have not had any issues with glitches or crashes. Once it's installed, it's running all of the time without problems.

So far, there have not been any issues. 

The only ones that we did have were with some wiring in the building. 

The products were fine. The only time they have gone down is when they first had to do firmware updates. It has only been three weeks, but so far, they have worked very well.

I am wholly in agreement that the solution is stable. 

The stability of the solution seems to be very good. There are no bugs or glitches. it doesn't crash or freeze. It's reliable. 

The solution is stable and more secure when you compare it to Ruckus because if you have an MX firewall, you automatically get the firewall features over your Wi-Fi as well. The outcome is that all the data passing through the Wi-Fi definitely passes through the firewall. 

The solution is stable.

The stability is good. We haven't had any crashes. There haven't been bugs or glitches that have interrupted us or our work.

The stability of the solution is good. It's stable almost all of the time. We haven't experienced any crashes or anything of that nature.

The solution is stable. We haven't had issues with the hardware.

Cisco Meraki Wireless LAN is a stable solution.

The stability of Cisco Meraki Wireless LAN is great.

The solution is stable and reliable.

The stability of the product is good. It doesn't crash or freeze and there are no bugs or glitches. It's a reliable solution.

It is very stable, very resilient, and very robust.

It's stable. In terms of our users, we have guest users and such. It might be that on a particular day we have about a thousand clients and devices connected to the platform.

The solution is very stable. It is a very manageable and secure system.

It is pretty stable.

It's a stable solution. There are no issues with stability.

I would say overall it's really stable. When they realize features, it looks like it is well tested and they don't just release them to release a new feature and if it's a better feature they write it as beta so please be careful.

It is stable. We've never had any bugs. 

Nope

The stability of the Cisco Meraki Wireless LAN is very good.

Cisco Meraki Wireless LAN is a stable and reliable solution. We have a dedicated team to perform maintenance.

This solution is scalable and we haven't had any issues with it. I would say that it is for medium-sized and enterprise-level businesses.

This solution is not stable.

This solution is still evolving and sometimes the authentication stops working and the client is not able to browse anything even though it is connected. It's quite an unstable solution. 

The stability is very good.

I have found it to be stable.

We had no issues with its stability.

This product is quite stable and we haven't had any issues with our client.

Cisco Meraki is quite stable.

We have been using it only for a few months. We need to use it for a longer time to see its stability.