The initial setup is not difficult. I rate it an eight out of ten. Deployment takes less than one hour to divide properly with all the configurations and parameters. We had eight people involved in deployment, two from our organization and six from Dynatrace. However, our company is very large, and it has thousands of servers, so it has taken about seven months to deploy.

The solution's initial setup is straightforward. We can refer to the guidance document for the process.

Its setup isn't very intuitive.

I was not a part of the deployment process, but based on what I know, it was easy to deploy.

The initial setup is very easy. I would rate my experience with the initial setup a nine out of ten, where one is difficult, and ten is easy. 

The initial setup for ManageEngine OpManager was very simple. It was very, very easy. On a scale of one to five, with five being very easy and one being very difficult, my rating for the setup is four out of five.

We have had some issues with the initial setup. We struggled to complete the installation.

In terms of deployment, it's a fairly straightforward initial discovery process.

We had so many modules, including the firewall monitor, et cetera. It was deployed over several months. It took about three months.

It is not difficult to maintain the solution. 

The setup was easy. When it comes to setup with Sophos, the setup is easy. Quite straightforward. But when it comes to actually managing or monitoring the solution, the policies, so the worst part of the product is Sophos abruptly or suddenly changes its policies. It does a lot of things in the background, and the administrator is not at all aware of it. So, it becomes very difficult for the administrator to troubleshoot the exact issue that probably got caused because of Sophos. So, the management of Sophos is difficult.

The deployment took a couple of days. 

The setup is straightforward. The only thing that takes time is registering every device that is in the network. For every switch, you need to provide its credentials. For every router, the same. So every device needs to be enrolled in the platform. That takes some manual labor, especially if there are different accounts for each device. You have to enroll them, create the keys, create the credentials, then enroll them.

Installing the solution takes two to three hours. Configuring the solution and implementing every device in a network can take from days to maybe months. It depends on the number of devices and the complexity of the architecture where it is installed.

The tool's setup is straightforward. 

ManageEngine OpManager's deployment and maintenance is easy and takes three days to complete. You need two resources to handle the process. 

We've had to redeploy it a couple of times. I was involved in the redeployments due to how bad it was.

It's a bit complex to set up. There are too many customizations that are difficult to get around. 

I'd rate the ease of implementation two out of ten.

The setup is not complex. It's really simple and there is documentation available. I would rate my initial setup experience as a five out of five.

The setup for this solution is fairly challenging; it is easy to download and deploy, but complicated to configure and customize.

ManageEngine OpManager's initial setup is of a medium level of difficulty. I used some tools for the installation and for customization.

The initial setup is easy to do.

It took approximately two months to install and configure everything.

Installation was pretty straightforward. We did get assistance from the team locally assigned to assist us, but the majority of the work was done within our internal IT team.

The initial setup is not too complicated.

With regard to configurations, however, it would be nice to have more documentation on SNMP configurations. For example, if I want to add a new vendor, it would be great if ManageEngine provided the requirements for that vendor, such as the commands needed.

The initial setup of ManageEngine OpManager was straightforward. The full implementation process took approximately one week. 

I rate the initial setup of ManageEngine OpManager a four out of five.

The initial setup of OpManager is very easy and straightforward. Unlike some competitors, especially on the Linux side, the wizard will guide you through your install and you'll be up and running in minutes. OpManager has a self-contained web server and SQL server that make life easy.

The initial setup is very simple.

In the initial setup, it is very easy to deploy. It supports SMB (Server Message Block) and WMI (Windows Management Instrumentation) protocol. So with SMB and WMI, it can support multiple platforms like Linux and Windows and Cisco devices.  

During the initial setup, there are interviews by the Site Engineer. Once the setup is complete, our engineer will take care of the configuration and support. If there are any issues then we have to engage with the Site Engineer.

The initial setup is very simple. 

The initial setup was very simple. The deployment takes two to three days.

The initial setup of this solution is straightforward.

The solution is neither easy nor hard to set up. I'm pretty neutral on the process of implementation. It depends on the customer and the scope.

 It is straightforward.

I did not do the initial setup. However, I did some minor migrations and it was not difficult.

The tool's deployment was easy and I just followed the steps in the documentation. The solution's deployment got completed in an hour. 

The initial setup is straightforward. Deployment takes about half an hour. I had to do a lot of research, but once I realized how everything worked, it was very quick. You only need one person to handle deployment.

The initial setup is a bit complicated. It needs a technician who is very aware of the flow and how to officially set up the flow chart, etc.

Easy and straightforward

Installation is very easy and has no complexity at all. After installation anyone with IT skills can become an OpManager Admin in just eight days.

It took approximately two days to deploy the solution. If there is an issue, investigations may cause it to take longer to investigate and solve the issue. Usually, the issue will be related to a network issue or a policy that needs to be opened.

The initial setup is straightforward. It's easy to manage.

The initial setup is straightforward. Deployment takes less than two days. For maintenance, you need to have a proactive type of arrangement.

I didn't set them up but from what I know about it, it's straightforward.

Very simple setup. Much easier than some of the other big-name monitoring solutions out there.

The initial setup is straightforward. It wasn't complex. 

We did the full initial set up and it was very straightforward, there was no specific issue.