2019-10-16 07:46:00 UTC

Best backup for 100Gbps+ read and write with hardware encryption?


What is the best backup for super-duper (100Gbps) fast read and write with hardware encryption?

Guest
2020 Answers
Vendor

The backup speed depends on:
- number of concurrent I/O streams
- data type
- network
- read/write speed of backup repository
- data encryption enable or not
- terabytes of front end data to be backed up

The question is not clear enough, to sizing a high scalable, high throughput environment. To archive the 100Gbps throughput, you have to list down the mentioned information.

For a very large environment, I strongly recommend using either NetBackup or CommVault.

2019-10-16 12:48:40 UTC16 October 19
ResellerTOP 5LEADERBOARD

There is no such thing as best "anything" let alone backups. There are plenty of enterprise solutions that can handle the load you mentioned plenty are available in the market and it all comes down to your needs.

Hardware encryptions might be much more secure (tougher to hack but still hackable) than software encryptions however they open doors for vendor lock-in and that in certain situations can affect the recoverability of your data.

My advice to you is to focus on looking for a backup solution that can help you guarantee the recoverability of your data at the event of a disaster rather than focus on best backup 100gbps with hardware encryptions.

At the end of the day what's the point of a backup solution if it can do all that you mentioned and fails you at the event of a disaster.

If you can give me more environment details such as what kind of platforms and apps are being utilized I may be able to assist other than that my answers to you are there is no such thing as the best backup for 100gbps with hardware encryption.

We live in a world where everything is software-defined and it's safe to say that that's the way everyone should go.

2019-10-23 13:31:01 UTC23 October 19
User

It seems an object storage with inline dedupe could fit but would need to be sized for the performance. Backup targets are typically tuned for the ingest. Is the data dedup-able or compressible? How much data are you looking to backup and in how much time? How much data do you need to restore and in how much time?

2019-10-18 12:39:43 UTC18 October 19
Real UserTOP 5

We use the smallest Cohesity cluster possible with three nodes and have 60GBps of available bandwidth. I assume with more nodes you could get to 100Gbps. They have flash and an unbelievable filesystem. Do you have a use case for 12,500 megabytes per second of backup throughput? I'm having trouble envisioning an admin who would be in charge of a source capable of that coming to a forum like this with your exact question!

2019-10-17 18:08:36 UTC17 October 19
Real UserTOP 5LEADERBOARD

Your question is not cearly enough for calculate best scenario for your question, Because there are many factors depend on such as :
-Backup for what physical or virtualization environment.
-Data tybe.
-Network speed on all devices.
-Storage tybe flash or tap.
-What is the read/write speed of your disks/tape, AND the bus/controller speed that the disk is attached to?
-How many files and, how much data are you backing up?
-Is your backup application capable of running multiple jobs and sending multiple streams of data simultaneously?

Some potential points for improvement might include:
Upgrading switches and ethernet adapters to Gigabit Ethernet or greater.
Investing in higher performing disk arrays or subsystems to improve read and write speeds.
Investing in LTO-8 tape drives and consider a library, if you are not already using one, so that you can leverage multiplex (multistream) to tape.

2019-10-17 13:41:10 UTC17 October 19
Real UserTOP 5

To be able to reach that speed of read and writes, other factors also play a role. For example, network topology, NIC speeds and the backup client speed for data delivery.

Aside from that, you'll need larger files to reach that speed, since with smaller files there is always a speed ramp up time.

So there is no straightforward answer.

But what kind of data or machines is he trying to backup? What OS, DB, and type of apps, will help to give a definite answer.

Solutions that will always deliver is Netbackup (All apps, OS' and DB's), Backup Exec (MS apps, Win and Linux and some DB's) and Veeam.

2019-10-17 08:10:19 UTC17 October 19
Real UserTOP 5

While we do not sell/offer backup SW per se, we do work with a lot of providers like Commvault, Rubrik, Veeam et el, I can say a majority of our user base, large global companies with 10+ Offices, do use Rubrik, and implement it with the generic S3 out that points to s3.customer_name.rstor.io .As RStor pricing model, we do not charge for Puts/Gets Reads/Writes, Ingress/egress fees. And with triple geographic replication a standard offering, the customer data moves fast in all regions with a super-fast network multiple +100G connections LAG's together, transferring 1PB in 22.5hrs, from SJC to LHR!

2019-10-16 21:51:23 UTC16 October 19
Vendor

There are plenty of tools out there at the moment, many include features like data encryption, e-discovery, and instant restore.
For the current use case, small company/no data center - I would recommend Acronis.
The commercial version of the product even includes a proprietary feature called active protection that is a ransomware defense tool that is unlike anything else on the market.

2019-10-16 21:22:46 UTC16 October 19
Vendor

There are a lot of details that you would need to provide to properly answer your question. How much and what type of data? Is the data being access at the same time in production as it is being ingested? Can you use an agent on a client to do things like client-side dedup? The source (storage) is most likely going to be the bottleneck. Without knowing the answers to the questions and many more I am not sure I can answer properly.

Having been in the industry for 20+ years and constantly staying up on the technology, I can tell you that the fastest backup and recovery solution I have seen to date is:
Source - PureStorage FlashArray (excryption is always on)
Data type - VMWARE 6.x VMDK and VVOL (included VMs with DBs and Apps)
Backup Software - NetBackup 8.x using CloudPoint snapshot manager
Storage Target - Pure Storage Flash Array over 16Gb FC
Backups and Recovery were extremely fast (seconds).
But with everything... the devil is in the details and mileage will vary.

2019-10-16 20:25:02 UTC16 October 19
User

There are N numbers of good backup software. If the environment covers with both Physical, Virtual environment, I would suggest to try with Netbackup 8.1 backup Software or EMC Networker. Commvault is too good, however, its license and maintenance costings are higher than Veritas, EMC.

Apart from the file system level backup, for any Exchange, SQL, Oracle, NAS level backup, they are good at managing backup and recovery.

The throughput totally depends on the media server bandwidth, Switch connectivity, FC/FCoE connection, efficient backup resources for backup media servers with high-level planning & designing.

For exact recommendation, as all of us are suggesting, the details and capacity required for the overall environment.

You might just approach the backup software vendor to have a POC testing and DEMO overview before you finalize any tool.

2019-10-16 17:05:40 UTC16 October 19
Vendor

There isn´t one single back up target device/appliance doing 100Gbs throughput in the marker. To achieve that number requires multiple appliances like HPE StoreOnce. Also, it requires a lot from the primary disk array and infrastructure to provide 100Gbs ie multiple mid-range/high-end all-flash disk arrays etc.

2019-10-16 10:22:11 UTC16 October 19
UserTOP 20

In my experiences i generally prefer netbackup appliances for fast backup and recovery including encrypted data.

2019-10-16 09:08:13 UTC16 October 19
Real UserTOP 5

Possibly CommVault can do it but what's the data type? If they are too small files, no backup program show 100Gbps. And also what kind of backup repository will you use? Maybe full flash repository can handle this IO.

2019-10-17 06:17:21 UTC17 October 19
Real User

What are your RPO and RTO requirements, as well as what SLA's do you have for your clients? Backup and Recovery aren't normally performance-driven since it's not a tier 1 storage.

2019-10-17 01:11:20 UTC17 October 19
Vendor

COHESITY is the solution. Parallel Ingest provides the best performance, impenetrable file system, with native encryption to the F142 layer.

2019-10-16 21:26:40 UTC16 October 19
User

Look into Veeam or Zerto provided backup tools.

2019-10-16 19:54:58 UTC16 October 19
Vendor

It's all dependant upon the server/storage technology being deployed.

2019-10-16 19:15:12 UTC16 October 19
Vendor

Personally, I would recommend looking at ExaGrid. It is the fastest Backup & Recovery target that can scale from 3TB to 2PB. It also can have 1GbE, 10GbE or 40GbE connection speeds. Any appliance greater than 7TB can come with encrypted disks. Any backup software works to it accept the proprietary ones such as Avamar, Rubrik and Cohesity. Also, it has no forced obsolescence like the NetBackup or other such appliances.

2019-10-16 18:16:54 UTC16 October 19
Vendor

Netbackup 8.x with Netbackup Appliance 5340 would be good to back up any Enterprise Backup Environment with a higher amount of speed.
For more detailed suggestions. Please share your Backup Environment - Server count, Type of backups, Volumetrics per month, Data retentions etc..

2019-10-16 14:25:58 UTC16 October 19
Real UserTOP 5

Usually, you need backup data, not the hardware. Please share your current design, then we will be able to share our thoughts.
In general, it can be any backup software that you are familiar with, you just need properly size the HW for it.

2019-10-16 09:44:19 UTC16 October 19
Find out what your peers are saying about Veeam Software, Rubrik, Cohesity and others in Backup and Recovery Software. Updated: October 2019.
377,556 professionals have used our research since 2012.
Sign Up with Email